# Amber Lantern — complete Csound settings

## Signal flow and interpretation

Three saw/triangle voices plus centered sub → serial notch and lowpass → shared saturation → filtered ping-pong delay → gain and DC removal.

The [Ableton version](/tutorials/amber-lantern/) supplies the envelope times, source levels and effect mix settings. Saw and triangle waveforms interpret the two Basic Shapes positions; their spectra, envelope slopes, resonance and saturation differ. The notch envelope and velocity depth use explicit octave amounts, not a universal conversion from matrix units. Mono-legato note priority, pitch bend and modulation-wheel input are not implemented. The small second-filter resonance is omitted.

## Instrument and effect controls

| Control | Csound value |
| --- | --- |
| Stage 1 sources | Three saws; −9 dB each; offsets −5/0/+5 cents; phases 0.11/0.39/0.72 |
| Unison channel weights | Left 0.8/0.5/0.2, right reversed; each sum / 1.5 |
| Amplitude | Linear 4.40 ms / 643 ms / −4 dB / 191 ms |
| Instrument / touch | −6 dB × (0.4 + 0.6 × velocity) |
| Glide | portk half-time 40 ms; starts at the previous target |
| Second source from stage 2 | Triangle per voice; −13 dB; +5 cents |
| Sub from stage 2 | Centered sine; octave down; −18 dB |
| Notch envelope | Linear 20 ms / 1.10 s / 20% / 300 ms |
| Notch | 1090 × 2^(−0.8 × envelope) Hz; bandwidth center / 1.2 |
| Lowpass | 6800 × 2^(0.35 × velocity) Hz; limited to 30–18000 Hz |
| Saturation from stage 3 | DC removal; tanh(input × 3 × ampdb(3.1)) / 3; 70% wet; −3 dB trim |
| Delay from stage 4 | 267 ms per side; 24% crossed feedback; 18% wet; left-only input injection |
| Delay filters | 1800 Hz center; highpass center / 2^1.75; lowpass center × 2^1.75 |
| Final stage 5 | +5.80 dB; stereo retained; DC removal |

## Opcode references

[butterbr](https://csound.com/docs/manual/butterbr.html) uses a notch center and bandwidth in hertz. [vco2](https://csound.com/docs/manual/vco2.html) supplies the band-limited waveforms. The feedback signals in the full script are filtered before they recirculate.

## Full script and stage selector

The [full script](BUILD_GUIDE.md#full-csound-script) contains options, both instrument definitions and an example score. Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Instrument 90 reads the shared note buses and clears them after processing each control block. Keep it active while notes or effect tails sound. The stage selector is cumulative.

[Starting settings](STARTING_STATE.md) · [Build guide](BUILD_GUIDE.md)

## DC-blocking window

DC removal uses `dcblock2` with order 2048. This longer window limits low-note attenuation compared with its default order of 128, while adding processing delay. The same filtered signal feeds both the clean and shaped saturation paths, keeping those paths aligned.

[Read on playgrid.cc](https://playgrid.cc/tutorials/amber-lantern/csound/settings/)
