# Build Apricot Pulse in Csound

[SuperCollider version](/tutorials/apricot-pulse/supercollider/): the same sound interpreted with stock SuperCollider synthesis units.

Apricot Pulse is a pulse-wave keyboard sound whose filter closes faster than its amplitude fades. This version interprets the [Ableton Analog sound](/tutorials/apricot-pulse/) with explicit exponential contours and moving delay taps.

Signal flow: **32% pulse + octave sine → driven ladder lowpass → amplitude → chorus → room → output**.

[Starting settings](STARTING_STATE.md) · [Complete settings](ALL_PARAMETERS.md). The full runnable script appears at the end of this guide.

## Step 1 — Build the pulse-key amplitude contour

Set `giStage init 1`. Use `vco2` mode 2 with a fixed pulse width of 0.32 and oscillator gain −7 dB. The unequal duty cycle supplies a hollow but bright harmonic shape.

```csound
aAttack linseg 0, 0.005, 1, 1, 1
aDecay expsegr 1, 0.005, 1, 1.40, 0.15, 0.420, 0.000001
```

Multiply the gate and exponential envelope. The gate rises over 5 ms; after that opening interval, the decay falls toward 0.15 over 1.40 s. Note-off starts a 420 ms exponential release to a quiet positive floor. Apply −6 dB amplifier gain and −7 dB instrument gain, then multiply by velocity squared. This explicit touch curve interprets Analog's velocity response rather than copying its internal scaling. The pulse remains centered, with no unison or glide.

<audio controls preload="none" aria-label="Csound Apricot Pulse after step 1"><source src="audio/steps/step-01.webm" type="audio/webm"></audio>

[Sound after step 1 — WebM/Opus](audio/steps/step-01.webm)

## Step 2 — Add an octave sine and a closing resonant lowpass

Set `giStage init 2`. Add a sine one octave above the pulse at −22 dB, then send both sources into the same 24 dB/octave ladder lowpass.

```csound
kCutoff = limit(950*pow(2, 2.30*kFilter+0.70*(p4-60)/12), 30, 18000)
aDrive = tanh(aSource*1.3)/1.3
aSource moogladder aDrive, kCutoff, 0.16
```

Build `kFilter` from a 5 ms attack gate and an exponential decay to 0.08 over 320 ms, with a 250 ms release. Interpreting depth 2.30 as octaves gives a bright initial opening that closes much faster than the amplitude. Key tracking is 0.70 octaves per keyboard octave around MIDI 60. The soft input curve and resonance 0.16 interpret Analog's Sym1 and resonance controls. The ladder is a different filter design, so its response is not identical to Analog's.

<audio controls preload="none" aria-label="Csound Apricot Pulse after step 2"><source src="audio/steps/step-02.webm" type="audio/webm"></audio>

[Sound after step 2 — WebM/Opus](audio/steps/step-02.webm)

## Step 3 — Give the keys a light stereo chorus

Set `giStage init 3`. Highpass only the chorus input at 180 Hz; keep the direct pulse body full-band. Modulate two delay taps around 12 ms by ±2.4 ms, with opposite motion at 0.32 Hz.

```csound
aTimeL interp 12+2.4*kMotion
aTimeR interp 12-2.4*kMotion
aChorusL vdelay3 aHigh, aTimeL, 40
aChorusR vdelay3 aHigh, aTimeR, 40
```

Mix 82% direct and 18% chorus in each channel. The moving taps give sustained portions a slight stereo pitch shimmer, while the input highpass reduces low-end blur. The 2.4 ms excursion is a Csound choice for the source Amount 12%; it is not a literal percentage-to-time conversion.

<audio controls preload="none" aria-label="Csound Apricot Pulse after step 3"><source src="audio/steps/step-03.webm" type="audio/webm"></audio>

[Sound after step 3 — WebM/Opus](audio/steps/step-03.webm)

## Step 4 — Place the keys in a compact room

Set `giStage init 4`. Feed the chorus mix through 12 ms of predelay into `reverbsc` with feedback 0.74 and damping at 4500 Hz. Blend 83% chorus mix with 17% room.

Predelay leaves the pulse attack in front; damping softens the high-frequency reflections as the tail fades. Feedback 0.74 interprets the role of the source's 1.80 s room, without assigning it that exact decay time. Diffusion, shelves and room-size parameters are represented by this different reverb algorithm rather than copied numerically.

<audio controls preload="none" aria-label="Csound Apricot Pulse after step 4"><source src="audio/steps/step-04.webm" type="audio/webm"></audio>

[Sound after step 4 — WebM/Opus](audio/steps/step-04.webm)

## Step 5 — Set the final gain and remove DC

Set `giStage init 5`. Apply +4.80 dB and `dcblock2` to each output channel. Keep the chorus and room's stereo image unchanged; no bass narrowing is added.

The gain follows both effects, so it raises the short pulse body and the diffuse tail together. Clear `gaVoice` after each control block, leaving the effects' own memory intact. The finished keys have a sharp harmonic opening, a softer sustained body and a light stereo halo.

<audio controls preload="none" aria-label="Csound Apricot Pulse after step 5"><source src="audio/steps/step-05.webm" type="audio/webm"></audio>

[Sound after step 5 — WebM/Opus](audio/steps/step-05.webm)

## Downloads and settings

[Finished sound — WebM/Opus](audio/apricot-pulse.webm) · [Complete settings](ALL_PARAMETERS.md) · [Ableton implementation](/tutorials/apricot-pulse/)

## Full Csound script

The complete Apricot Pulse instrument and shared effects. `giStage` selects cumulative stages 1–5; 5 is the finished sound. Instrument 1 takes held seconds, MIDI pitch and velocity in p3–p5. Instrument 90 carries the output and any effect tails.

```csound
<CsoundSynthesizer>
<CsOptions>
-odac -d
</CsOptions>
<CsInstruments>
sr = 48000
ksmps = 16
nchnls = 2
0dbfs = 1

giStage init 5
giSine ftgen 0, 0, 16384, 10, 1
gaVoice init 0
instr 1
  iHz = cpsmidinn(p4)
  iVelocity = limit(p5, 0, 1)
  aPulse vco2 ampdb(-7), iHz, 2, 0.32
  aSource = aPulse
  if giStage >= 2 then
    aOctave oscili ampdb(-22), iHz*2, giSine
    aSource = aSource+aOctave
    kAttack linseg 0, 0.005, 1, 1, 1
    kDecay expsegr 1, 0.005, 1, 0.320, 0.08, 0.250, 0.000001
    kFilter = kAttack*kDecay
    kCutoff = limit(950*pow(2, 2.30*kFilter+0.70*(p4-60)/12), 30, 18000)
    ; Smooth input shaping interprets the filter's Sym1 drive.
    aDrive = tanh(aSource*1.3)/1.3
    aSource moogladder aDrive, kCutoff, 0.16
  endif
  aAttack linseg 0, 0.005, 1, 1, 1
  aDecay expsegr 1, 0.005, 1, 1.40, 0.15, 0.420, 0.000001
  aAmp = aAttack*aDecay*ampdb(-6)*ampdb(-7)*iVelocity^2
  gaVoice = gaVoice+aSource*aAmp
endin
instr 90
  aLeft = gaVoice
  aRight = gaVoice
  if giStage >= 3 then
    aHigh butterhp gaVoice, 180
    kMotion oscili 1, 0.32, giSine
    aTimeL interp 12+2.4*kMotion
    aTimeR interp 12-2.4*kMotion
    aChorusL vdelay3 aHigh, aTimeL, 40
    aChorusR vdelay3 aHigh, aTimeR, 40
    aLeft = gaVoice*0.82+aChorusL*0.18
    aRight = gaVoice*0.82+aChorusR*0.18
  endif
  aMixL = aLeft
  aMixR = aRight
  if giStage >= 4 then
    aPreL delay aLeft, 0.012
    aPreR delay aRight, 0.012
    aRoomL, aRoomR reverbsc aPreL, aPreR, 0.74, 4500
    aMixL = aLeft*0.83+aRoomL*0.17
    aMixR = aRight*0.83+aRoomR*0.17
  endif
  if giStage >= 5 then
    aMixL dcblock2 aMixL*ampdb(4.80), 2048
    aMixR dcblock2 aMixR*ampdb(4.80), 2048
  endif
  outs aMixL, aMixR
  clear gaVoice
endin
</CsInstruments>
<CsScore>
i 1 0.0 1.2 60 0.80
i 1 0.0 1.2 64 0.80
i 1 0.0 1.2 67 0.80
i 1 3.6 1.2 57 0.90
i 1 3.6 1.2 62 0.90
i 1 3.6 1.2 65 0.90
i 90 0 12
e
</CsScore>
</CsoundSynthesizer>
```

[Read on playgrid.cc](https://playgrid.cc/tutorials/apricot-pulse/csound/)
