# Cirrus Window — Csound starting settings

## Source and amplitude

Start with the saw-only `CirrusVoice` output, three detuned voices and the amplitude section from the [complete orchestra](ALL_PARAMETERS.md#complete-orchestra). Bypass the pulse, both filters, ensemble, reverb and final bass narrowing until their numbered steps.

| Control | Starting value |
| --- | --- |
| Saw gain | −13 dB per voice |
| Voice detuning | −7, 0, +7 cents |
| Voice phases | 0.08, 0.41, 0.73 cycles |
| Pitch drift | ±2.2 cents; 0.17 + abs(detune) × 0.008 Hz |
| Amplitude | 0.85 s attack; 2.5 s decay; −2 dB sustain; 2.4 s release |
| Envelope curve | Raise linear envelope to power 1.6 |
| Velocity multiplier | 0.55 + 0.45 × velocity |
| Instrument gain | −8 dB × 0.65 |
| Stereo weights | Left: 0.87 / 0.5 / 0.13; right: reversed; divide by 1.5 |

## Signal path

Saw voice sum → amplitude and velocity → stereo output. Instrument 90 owns the shared LFO and output, and clears the note buses after processing. Each later step adds the next synthesis or effect section; use the finished orchestra as the wiring reference.

[Build guide](BUILD_GUIDE.md) · [Complete settings](ALL_PARAMETERS.md)

[Read on playgrid.cc](https://playgrid.cc/tutorials/cirrus-window/csound/starting-state/)
