# Copper Circuit — Analog starting settings

Use these settings for the first synthesis stage. Step 2 enables the additional sources or shaping sections and gives their final values.

## Analog

Analog’s **F1 Freq** and **F2 Freq** values are in hertz.

| Control | Value |
| --- | --- |
| Device On | On |
| Voices | Mono |
| PB Range | 2.00 |
| Volume | -6.0 dB |
| Note PB Range | 48 st |
| Press Dest A | Filter 1 Cutoff |
| Press Amt A | 12 % |
| Press Dest B | No Destination |
| Press Amt B | 50 % |
| Slide Dest A | No Destination |
| Slide Amt A | 50 % |
| Slide Dest B | No Destination |
| Slide Amt B | 50 % |
| Octave | 0 |
| Semitone | 0 st |
| Detune | 0.00 |
| Unison On/Off | Off |
| Unison Voices | 2 |
| Unison Detune | 0.00 |
| Unison Delay | 0 ms |
| Key Priority | Last |
| Key Stretch | 0 % |
| Key Error | 0 % |
| Vib On/Off | Off |
| Vib Speed | 5.1 Hz |
| Vib Fade-In | 0 ms |
| Vib Amount | 0 % |
| Vib Error | 0 % |
| Vib Delay | 0 ms |
| Vib < ModWh | 0 % |
| Glide On/Off | Off |
| Glide Time | 50 % |
| Glide Mode | Prop |
| Glide Legato | Off |
| Noise On/Off | Off |
| Noise Color | 682 Hz |
| Noise Balance | F1 |
| Noise Level | 0.0 dB |
| OSC1 On/Off | On |
| OSC1 Shape | Saw |
| OSC1 Octave | 0 |
| OSC1 Semi | 0 st |
| OSC1 Mode | Sub |
| PEG1 Time | 50 % |
| OSC1 Detune | 0.00 |
| O1 Keytrack | 100 % |
| OSC1 PW | 50 % |
| O1 Sub/Sync | 0 % |
| OSC1 Balance | F1 |
| PEG1 Amount | 0 % |
| OSC1 < LFO | 0.00 |
| O1 PW < LFO | 0.00 |
| OSC1 Level | -6.0 dB |
| F1 On/Off | Off |
| F1 Type | Low-pass 24dB/oct |
| F1 Drive | Sym1 |
| F1 Freq < Key | 0.50 |
| F1 Freq | 270 |
| F1 Reso < Key | 0.00 |
| F1 Resonance | 52 % |
| F1 To F2 | 0 % |
| F1 Freq < LFO | 0.12 |
| F1 Freq < Env | 3.20 |
| F1 Res < LFO | 0.00 |
| F1 Res < Env | 0.00 |
| FEG1 Exp | On |
| FEG1 Loop | Off |
| FEG1 Free | Off |
| FEG1 Legato | Off |
| FEG1 A < Vel | 0.00 |
| FEG1 Attack | 5 ms |
| FEG1 Decay | 210 ms |
| FEG1 < Vel | 0.00 |
| FEG1 Sustain | 0.08 |
| FEG1 S Time | inf s |
| FEG1 Rel | 130 ms |
| AMP1 On/Off | On |
| AMP1 < Key | 0.00 |
| AMP1 Level | -6.0 dB |
| A1 Pan < Key | 0.00 |
| AMP1 Pan | C |
| AMP1 < LFO | 0.00 |
| A1 Pan < LFO | 0.00 |
| A1 Pan < Env | 0.00 |
| AEG1 Exp | On |
| AEG1 Loop | Off |
| AEG1 Free | Off |
| AEG1 Legato | Off |
| AEG1 A < Vel | 0.00 |
| AEG1 Attack | 5 ms |
| AEG1 Decay | 480 ms |
| AEG1 < Vel | 2.50 |
| AEG1 Sustain | 0.65 |
| AEG1 S Time | inf s |
| AEG1 Rel | 130 ms |
| LFO1 On/Off | On |
| LFO1 Shape | Sine |
| LFO1 SncRate | 1/4 |
| LFO1 Sync | Hertz |
| LFO1 Retrig | Off |
| LFO1 PW | 50 % |
| LFO1 Speed | 1.7 Hz |
| LFO1 Phase | 0° |
| LFO1 Delay | 0 ms |
| LFO1 Fade In | 0 ms |
| OSC2 On/Off | Off |
| OSC2 Shape | Rect |
| OSC2 Octave | 0 |
| OSC2 Semi | 0 st |
| OSC2 Mode | Sub |
| PEG2 Time | 50 % |
| OSC2 Detune | 0.00 |
| O2 Keytrack | 100 % |
| OSC2 PW | 38 % |
| O2 Sub/Sync | 0 % |
| OSC2 Balance | F1 |
| PEG2 Amount | 0 % |
| OSC2 < LFO | 0.00 |
| O2 PW < LFO | 0.00 |
| OSC2 Level | -12 dB |
| F2 On/Off | Off |
| F2 Type | Low-pass 12dB/oct |
| F2 Drive | Sym1 |
| F2 Freq < Key | 0.00 |
| F2 Freq | 22.0k |
| F2 Reso < Key | 0.00 |
| F2 Resonance | 0 % |
| F2 Slave | Off |
| F2 Freq < LFO | 0.00 |
| F2 Freq < Env | 4.00 |
| F2 Res < LFO | 0.00 |
| F2 Res < Env | 0.00 |
| FEG2 Exp | On |
| FEG2 Loop | Off |
| FEG2 Free | Off |
| FEG2 Legato | Off |
| FEG2 A < Vel | 0.00 |
| FEG2 Attack | 5 ms |
| FEG2 Decay | 626 ms |
| FEG2 < Vel | 0.00 |
| FEG2 Sustain | 0.50 |
| FEG2 S Time | inf s |
| FEG2 Rel | 250 ms |
| AMP2 On/Off | Off |
| AMP2 < Key | 0.00 |
| AMP2 Level | -18 dB |
| A2 Pan < Key | 0.00 |
| AMP2 Pan | C |
| AMP2 < LFO | 0.00 |
| A2 Pan < LFO | 0.00 |
| A2 Pan < Env | 0.00 |
| AEG2 Exp | On |
| AEG2 Loop | Off |
| AEG2 Free | Off |
| AEG2 Legato | Off |
| AEG2 A < Vel | 0.00 |
| AEG2 Attack | 5 ms |
| AEG2 Decay | 626 ms |
| AEG2 < Vel | 4.00 |
| AEG2 Sustain | 0.50 |
| AEG2 S Time | inf s |
| AEG2 Rel | 500 ms |
| LFO2 On/Off | Off |
| LFO2 Shape | Sine |
| LFO2 SncRate | 1/4 |
| LFO2 Sync | Hertz |
| LFO2 Retrig | Off |
| LFO2 PW | 50 % |
| LFO2 Speed | 0.9 Hz |
| LFO2 Phase | 0° |
| LFO2 Delay | 0 ms |
| LFO2 Fade In | 0 ms |


[Build guide](BUILD_GUIDE.md) · [Read these settings on playgrid.cc](https://playgrid.cc/tutorials/copper-circuit/starting-state/)