# Build Falling Spectral Lead in SuperCollider

A stock-unit SuperCollider interpretation of [the Ableton sound](/tutorials/falling-spectral-lead/) and its [Csound version](/tutorials/falling-spectral-lead/csound/). Each stage changes the source or its effect chain; oscillator, filter, modal and room algorithms differ across platforms.

[Starting settings](STARTING_STATE.md) · [Complete settings](ALL_PARAMETERS.md). The full runnable script ends this guide.

## Step 1 — Begin with the plain sine

Select `~soundStage = 1` and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.

Set `~soundStage = 1` in the full script. Start from a sine carrier, a near-instant opening, full sustain and 400 ms release. Use −18 dB source gain and no filter, pitch movement or effects. The initial source isolates the fundamental before its harmonic layers are added.

| SuperCollider control | Value |
| --- | --- |
| Carrier / gain | Sine, ratio 1 / −18 dB |
| Amplitude | 0.1 ms attack; full sustain; 400 ms release |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 1"><source src="audio/steps/step-01.webm" type="audio/webm"></audio>

[Sound after step 1 — WebM/Opus](audio/steps/step-01.webm)

## Step 2 — Build the parallel harmonic layers

Set `~soundStage = 2` in the full script. Mix four independent sources. Truncated saw tables retain four, three and eight partials rather than using FM; the sine at ratio 4 reinforces the high even body. The sine sums use unnormalized 1/n coefficients. This keeps the harmonic construction explicit.

| SuperCollider control | Value |
| --- | --- |
| A | Ratio 2; four-partial saw; −5 dB |
| B | Ratio 4; sine; −1 dB |
| C | Ratio 3; three-partial saw; −7 dB |
| D | Ratio 1; eight-partial saw; −18 dB |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 2"><source src="audio/steps/step-02.webm" type="audio/webm"></audio>

[Sound after step 2 — WebM/Opus](audio/steps/step-02.webm)

## Step 3 — Give every layer the same swell

Set `~soundStage = 3` in the full script. Use a 145 ms attack, 1.10 s decay to −10 dB and 350 ms release. A shared linear contour represents the four matching source envelopes. Short notes release before the body develops; held notes settle into a quieter sustain.

| SuperCollider control | Value |
| --- | --- |
| Amplitude A/D/S/R | 145 ms / 1.10 s / −10 dB / 350 ms |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 3"><source src="audio/steps/step-03.webm" type="audio/webm"></audio>

[Sound after step 3 — WebM/Opus](audio/steps/step-03.webm)

## Step 4 — Add the falling pitch contour

Set `~soundStage = 4` in the full script. Start two semitones above each note and fall to its pitch over 1.10 seconds. A note-off release of 899 ms brings any remaining offset to zero. Every harmonic follows the same moving fundamental.

| SuperCollider control | Value |
| --- | --- |
| Pitch | +2 → 0 semitones in 1.10 s |
| Pitch release | 899 ms |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 4"><source src="audio/steps/step-04.webm" type="audio/webm"></audio>

[Sound after step 4 — WebM/Opus](audio/steps/step-04.webm)

## Step 5 — Soften the spectrum and raise instrument gain

Set `~soundStage = 5` in the full script. Use a 6200 Hz ladder lowpass with zero resonance, then set instrument gain to +2.5 dB. This interprets the source Clean 24 dB filter. Operator Tone and its small global spread are not separate controls here; chorus supplies the later stereo movement.

| SuperCollider control | Value |
| --- | --- |
| Lowpass | 6200 Hz, resonance 0 |
| Instrument gain | +2.5 dB |

For `MoogFF`, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 5"><source src="audio/steps/step-05.webm" type="audio/webm"></audio>

[Sound after step 5 — WebM/Opus](audio/steps/step-05.webm)

## Step 6 — Add moving stereo chorus

Set `~soundStage = 6` in the full script. Move two delay taps around 15 ms by ±4.4 ms at 0.65 Hz, with opposite phases and 20% wet mix. The wet inputs remain full-band. Scale side information by 1; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.

| SuperCollider control | Value |
| --- | --- |
| Tap center / excursion | 15 / ±4.4 ms |
| Rate / wet | 0.65 Hz / 20% |
| Wet highpass | Off |
| Width / feedback | 1 / 0 |
| Warmth shaping | 0% smooth-drive interpretation |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 6"><source src="audio/steps/step-06.webm" type="audio/webm"></audio>

[Sound after step 6 — WebM/Opus](audio/steps/step-06.webm)

## Step 7 — Add full-band stereo echoes

Set `~soundStage = 7` in the full script. Use 939 ms left and 939 ms right, 32% feedback and 22% wet. Inject the centered input on the left and cross-feed the filtered echoes so later repeats alternate sides. Keep repeats full-band. Feedback values are updated once per server processing block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.

| SuperCollider control | Value |
| --- | --- |
| Times | 939 / 939 ms |
| Feedback / wet | 32% / 22% |
| Routing | Crossed, left input |
| Filter center / width | Off |
| Time LFO | 0 Hz, ±0% |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 7"><source src="audio/steps/step-07.webm" type="audio/webm"></audio>

[Sound after step 7 — WebM/Opus](audio/steps/step-07.webm)

## Step 8 — Surround the tone with a damped room

Set `~soundStage = 8` and evaluate the full block. Feed the preceding signal into `FreeVerb2`, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.

The SuperCollider room value is 0.935902 and damping is 0.625. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.

| SuperCollider room control | Value |
| --- | --- |
| FreeVerb2 internal mix | 1, wet output only |
| Room | 0.935902 |
| Damping | 0.625 |
| Predelay | 12 ms |
| External room wet | 68% |

| SuperCollider control | Value |
| --- | --- |
| Room side multiplier | 1 |
| Room input cuts | Off |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 8"><source src="audio/steps/step-08.webm" type="audio/webm"></audio>

[Sound after step 8 — WebM/Opus](audio/steps/step-08.webm)

## Step 9 — Set the final width and gain

Set `~soundStage = 9` in the full script. Use 0.5 dB gain after the effects. Scale the side signal by 0.85, preserving the center. Leave final DC removal off. The fixed `~soundOutputScale` gain follows the complete effect chain at every stage. The effects Synth reads the stereo bus after the note group, and continues through note releases.

| SuperCollider control | Value |
| --- | --- |
| Final gain | 0.5 dB |
| Width | 0.85 × side |
| Bass side cutoff | Off |
| DC removal | Off |

<audio controls preload="none" aria-label="SuperCollider Falling Spectral Lead after step 9"><source src="audio/steps/step-09.webm" type="audio/webm"></audio>

[Sound after step 9 — WebM/Opus](audio/steps/step-09.webm)

## Downloads and settings

[Finished sound — WebM/Opus](audio/Falling-Spectral-Lead.webm) · [Complete settings](ALL_PARAMETERS.md) · [Ableton version](/tutorials/falling-spectral-lead/) · [Csound version](/tutorials/falling-spectral-lead/csound/)

## Full SuperCollider script

The complete Falling Spectral Lead instrument uses stock SuperCollider units. Set `~soundStage` from 1 to 9 and evaluate the entire block again to select a cumulative stage. Wait for the ready message; `~soundNote.(60, 0.8, 1)` plays MIDI 60 at velocity 0.8 with a one-second held duration. Held duration controls when release begins, while each source's decay and modulation continue independently. `~soundStop.()` frees the active instrument and its effects. This block replaces the previously installed PlayGrid instrument in the same interpreter.

```supercollider
(
~soundStage = 9;
~soundOutputScale = 0.05327541;
~soundRelease = 0.899;
~soundNames = (motion: \pgFallingSpectralLeadMotion, voice: \pgFallingSpectralLeadVoice, effects: \pgFallingSpectralLeadEffects);
~pgWave = { |freq, amplitude=1, phase=0, partials=#[1]|
    Mix(partials.collect { |weight, i|
        var harmonic = freq * (i + 1);
        SinOsc.ar(harmonic.clip(0.01, 22000), phase * 2pi * (i + 1)) * weight * (harmonic < 22000)
    }) * amplitude;
};
~soundDefs = [
    SynthDef(\pgFallingSpectralLeadMotion, { |out=0| Out.kr(out, DC.kr(0)) }),
    SynthDef(\pgFallingSpectralLeadVoice, { |out=0, midi=60, velocity=0.8, gate=1, startMidi=60|
        var stage = ~soundStage;
    var aA = 0, aB = 0, aC = 0, aD = 0, aL = 0, aR = 0, aSource = 0, iHz = 0;
    var iVelocity = 0, kAmp = 0, kFinal = 0, kGain = 0, kHz = 0, kPitch = 0;
    iHz = (midi).midicps;
    iVelocity = (velocity).clip(0, 1);
    kPitch = 0;
    if((stage >= 4)) {
    kPitch = EnvGen.kr(Env([2, 0, 0], [1.10, 0.899], \lin, releaseNode: 1), gate);
    };
    kHz = (iHz * (2 ** (kPitch / 12)));
    aSource = (SinOsc.ar(kHz, 0 * 2pi) * 1);
    if((stage >= 2)) {
    aA = ~pgWave.((kHz * 2), ((0 - 5)).dbamp, 0, [1.0, 0.5, 0.3333333333333333, 0.25]);
    aB = (SinOsc.ar((kHz * 4), 0 * 2pi) * ((0 - 1)).dbamp);
    aC = ~pgWave.((kHz * 3), ((0 - 7)).dbamp, 0, [1.0, 0.5, 0.3333333333333333]);
    aD = ~pgWave.(kHz, ((0 - 18)).dbamp, 0, [1.0, 0.5, 0.3333333333333333, 0.25, 0.2, 0.16666666666666666, 0.14285714285714285, 0.125]);
    aSource = (((aA + aB) + aC) + aD);
    };
    kAmp = EnvGen.kr(Env([0, 1, 1, 0], [0.0001, 1, 0.4], \lin, releaseNode: 2), gate);
    if((stage >= 3)) {
    kFinal = EnvGen.kr(Env([0, 1, ((0 - 10)).dbamp, 0], [0.145, 1.10, 0.350], \lin, releaseNode: 2), gate);
    kAmp = kFinal;
    };
    kGain = ((0 - 18)).dbamp;
    if((stage >= 5)) {
    aSource = MoogFF.ar(aSource, (6200).clip(20, 18000), (0 * 4).clip(0, 3.95));
    kGain = (2.5).dbamp;
    };
    aL = ((aSource * kAmp) * kGain);
    aR = aL;
    Out.ar(out, [aL, aR]);
        EnvGen.kr(Env.asr(0.0001, 1, 0.899), gate, doneAction: 2);
    }),
    SynthDef(\pgFallingSpectralLeadEffects, { |in=0, out=0|
        var stage = ~soundStage;
        var outputScale = ~soundOutputScale;
        var input = In.ar(in, 2);
    var feedback = LocalIn.ar(4);
    var aChFbL = 0, aChFbR = 0, aChInL = 0, aChInR = 0, aChMid = 0, aChSide = 0, aChTimeL = 0, aChTimeR = 0;
    var aDelFbL = 0, aDelFbR = 0, aDelSendL = 0, aDelSendR = 0, aDelTimeL = 0, aDelTimeR = 0, aEchoL = 0, aEchoR = 0;
    var aEndMid = 0, aEndSide = 0, aL = 0, aR = 0, aRoomInL = 0, aRoomInR = 0, aRoomL = 0, aRoomMid = 0;
    var aRoomPreL = 0, aRoomPreR = 0, aRoomR = 0, aRoomSide = 0, aTapL = 0, aTapR = 0, kCh = 0, kDelMotion = 0;
    var room41 = 0;
    aL = input[0];
    aR = input[1];
    if((stage >= 6)) {
    aChFbL = feedback[0];
    aChFbR = feedback[1];
    aChInL = aL;
    aChInR = aR;
    kCh = (SinOsc.kr(0.65, 0 * 2pi) * 1);
    aChTimeL = K2A.ar((15 + (4.4 * kCh)));
    aChTimeR = K2A.ar((15 - (4.4 * kCh)));
    aTapL = DelayC.ar((aChInL + (aChFbL * 0)), 80 / 1000, (aChTimeL / 1000).clip(0.00002, 80 / 1000));
    aTapR = DelayC.ar((aChInR + (aChFbR * 0)), 80 / 1000, (aChTimeR / 1000).clip(0.00002, 80 / 1000));
    aChFbL = aTapL;
    aChFbR = aTapR;
    aL = ((aL * 0.8) + (aTapL * 0.2));
    aR = ((aR * 0.8) + (aTapR * 0.2));
    aChMid = ((aL + aR) * 0.5);
    aChSide = (((aL - aR) * 0.5) * 1);
    aL = (aChMid + aChSide);
    aR = (aChMid - aChSide);
    };
    if((stage >= 7)) {
    aDelFbL = feedback[2];
    aDelFbR = feedback[3];
    kDelMotion = 0;
    aDelTimeL = K2A.ar((939.0 * (1 + (0 * kDelMotion))));
    aDelTimeR = K2A.ar((939.0 * (1 - (0 * kDelMotion))));
    aDelSendL = ((aL + aR) * 0.5);
    aDelSendR = 0;
    aEchoL = DelayC.ar((aDelSendL + (aDelFbR * 0.32)), 2200 / 1000, (aDelTimeL / 1000).clip(0.00002, 2200 / 1000));
    aEchoR = DelayC.ar((aDelSendR + (aDelFbL * 0.32)), 2200 / 1000, (aDelTimeR / 1000).clip(0.00002, 2200 / 1000));
    aDelFbL = aEchoL;
    aDelFbR = aEchoR;
    aL = ((aL * 0.78) + (aEchoL * 0.22));
    aR = ((aR * 0.78) + (aEchoR * 0.22));
    };
    if((stage >= 8)) {
    aRoomInL = aL;
    aRoomPreL = DelayN.ar(aRoomInL, 0.012, 0.012);
    aRoomInR = aR;
    aRoomPreR = DelayN.ar(aRoomInR, 0.012, 0.012);
    room41 = FreeVerb2.ar(aRoomPreL, aRoomPreR, 1, 0.935902, 0.625);
    aRoomL = room41[0];
    aRoomR = room41[1];
    aRoomMid = ((aRoomL + aRoomR) * 0.5);
    aRoomSide = (((aRoomL - aRoomR) * 0.5) * 1);
    aL = ((aL * 0.31999999999999995) + ((aRoomMid + aRoomSide) * 0.68));
    aR = ((aR * 0.31999999999999995) + ((aRoomMid - aRoomSide) * 0.68));
    };
    if((stage >= 9)) {
    aEndMid = ((aL + aR) * 0.5);
    aEndSide = (((aL - aR) * 0.5) * 0.85);
    aL = ((aEndMid + aEndSide) * (0.5).dbamp);
    aR = ((aEndMid - aEndSide) * (0.5).dbamp);
    };
    LocalOut.ar([aChFbL, aChFbR, aDelFbL, aDelFbR].collect { |channel| channel + DC.ar(0) });
    Out.ar(out, [((aL * 1) * outputScale), ((aR * 1) * outputScale)]);
    })
];
~soundStop = {
    if(~cirrusGroup.notNil) { ~cirrusGroup.free; ~cirrusGroup = nil };
    if(~cirrusAudio.notNil) { ~cirrusAudio.free; ~cirrusAudio = nil };
    if(~cirrusMotion.notNil) { ~cirrusMotion.free; ~cirrusMotion = nil };
    if(~pgGroup.notNil) { ~pgGroup.free; ~pgGroup = nil };
    if(~pgAudio.notNil) { ~pgAudio.free; ~pgAudio = nil };
    if(~pgMotion.notNil) { ~pgMotion.free; ~pgMotion = nil };
};
~soundInstall = {
    s.waitForBoot {
        ~soundStop.();
        ~soundDefs.do { |definition| definition.add };
        s.sync;
        ~pgAudio = Bus.audio(s, 2);
        ~pgMotion = Bus.control(s, 1);
        ~pgGroup = Group.head(s);
        ~pgLastMidi = 60;
        Synth.head(~pgGroup, ~soundNames.motion, [\out, ~pgMotion]);
        ~pgVoices = Group.tail(~pgGroup);
        Synth.tail(~pgGroup, ~soundNames.effects, [\in, ~pgAudio]);
        "Falling Spectral Lead ready".postln;
    };
};
~soundNote = { |midi=60, velocity=0.8, hold=1|
    var note = Synth.head(~pgVoices, ~soundNames.voice, [
        \out, ~pgAudio, \midi, midi, \velocity, velocity.clip(0, 1),
        \startMidi, ~pgLastMidi
    ]);
    ~pgLastMidi = midi;
    SystemClock.sched(hold, { note.set(\gate, 0); nil });
    note;
};
if(~soundOffline != true) { ~soundInstall.() };
)
```

[Read on playgrid.cc](https://playgrid.cc/tutorials/falling-spectral-lead/supercollider/)
