# Hollow Pulse Bass — complete Csound settings

## Note and effect connections

Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Its left and right outputs accumulate on shared buses. Instrument 90 processes the buses once per control block, clears the inputs and keeps effect memories active through the tails. Envelopes with release segments extend the note automatically. The score is an audible pitch-and-touch example; the synthesis controls are independent of its particular notes.

## Csound interpretation

These are explicit Csound models, not identical implementations of the Ableton devices. Wavetable positions, proprietary oscillator engines, physical-model macros, filter circuits, envelope slopes and effect algorithms can differ. Modulation depths are specified in octaves, cents or milliseconds rather than treated as universally interchangeable matrix values. Controller inputs such as pitch bend, modulation wheel, pressure and per-note expression are not mapped. Independent score notes do not implement Live's monophonic note-priority or legato system. Any pitch memory or drift included in this instrument is described in its steps.



## Signal path and controls

### Stage 1 — Establish the strong second harmonic

A sine at ratio 2 carries the body, with 2 ms attack, 1 s decay to −3.5 dB and 25 ms release. Velocity contributes 35% of its level multiplier. The root will arrive later, leaving the octave deliberately strongest.

| Csound control | Value |
| --- | --- |
| A | Sine, ratio 2, 0 dB |
| Amplitude | 2 ms / 1 s / −3.5 dB / 25 ms |
| Instrument | −12 dB |

### Stage 2 — Replace the sine with a bright saw

Change A to a band-limited saw at the same ratio and level. Its upper harmonics brighten the second-harmonic body. This interprets Saw 64 without fixing the source to exactly 64 harmonics at every pitch.

| Csound control | Value |
| --- | --- |
| A waveform | Band-limited saw, ratio 2 |

### Stage 3 — Add the quieter root and third-harmonic layer

Add ratio-3 saw at −6.5 dB and ratio-1 sine at −15 dB. Their 2 ms / 1 s / −2.5 dB / 25 ms contour keeps them close to the main body while allowing the root to remain quieter than the octave.

| Csound control | Value |
| --- | --- |
| B | Saw, ratio 3, −6.5 dB |
| C | Sine, ratio 1, −15 dB |
| B/C sustain | −2.5 dB |

### Stage 4 — Let the fourth harmonic swell and recede

Add a ratio-4 sine at −10 dB with a 280 ms rise, 120 ms fall to zero and 25 ms release. Its independent envelope produces a rounded middle without a repeating LFO.

| Csound control | Value |
| --- | --- |
| D | Sine, ratio 4, −10 dB |
| D envelope | 280 ms / 120 ms / zero / 25 ms |

### Stage 5 — Close the spectral ceiling

Use a 280 Hz Butterworth lowpass with a 480 ms envelope moving it by 3.3 octaves at the beginning. This explicit sweep interprets the source 55% modulation amount; no key or velocity tracking is added.

| Csound control | Value |
| --- | --- |
| Filter | 280 Hz base; 3.3 octave opening |
| Filter decay / release | 480 / 50 ms |

### Stage 6 — Add the small downward tuning drift

Move every source from −5 to −18 cents over 500 ms and use −8 dB instrument gain. The movement is intentionally cents, not a many-semitone fall. The output remains centered and contains no external effects.

| Csound control | Value |
| --- | --- |
| Pitch | −5 → −18 cents in 500 ms |
| Instrument | −8 dB |

## Output and signal rates

The script uses 48000 Hz, 16-sample control blocks and stereo output. The fixed output-scale control is `0.2711521` and follows the whole chain at every stage, separate from any final gain step. DC-removal blocks, where enabled, use order 2048 to limit low-note attenuation; they add processing delay.

[Build guide and full script](BUILD_GUIDE.md#full-csound-script) · [Starting settings](STARTING_STATE.md)

[Read on playgrid.cc](https://playgrid.cc/tutorials/hollow-pulse-bass/csound/settings/)
