# Build Indigo Arc in SuperCollider

A stock-unit SuperCollider interpretation of [the Ableton sound](/tutorials/indigo-arc/) and its [Csound version](/tutorials/indigo-arc/csound/). Each stage changes the source or its effect chain; oscillator, filter, modal and room algorithms differ across platforms.

[Starting settings](STARTING_STATE.md) · [Complete settings](ALL_PARAMETERS.md). The full runnable script ends this guide.

## Step 1 — Build the detuned source and amplitude contour

Select `~soundStage = 1` and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing. The triangle source is an explicit odd-harmonic sine sum through partial 31, with components at or above 22 kHz muted.

Set `~soundStage = 1` in the full script. Use 3 odd-partial triangle voices at -10 dB each, spread by 10.8 cents between adjacent voices. Reverse the stereo weights across the channels. The amplitude opens in 1.18 seconds, decays over 2.62 seconds to 0.794328, and releases over 3.04 seconds. Basic Shapes is represented by this explicit waveform; Shimmer, where present, becomes slow independent pitch drift rather than the original unison engine.

| SuperCollider control | Value |
| --- | --- |
| Sources | 3 × triangle, -10 dB |
| Adjacent pitch spacing | 10.8 cents |
| Amp A/D/S/R | 1.18 s / 2.62 s / 0.794328 / 3.04 s |
| Instrument gain | -9 dB |
| Velocity multiplier | 0.4 + 0.6 × velocity |

<audio controls preload="none" aria-label="SuperCollider Indigo Arc after step 1"><source src="audio/steps/step-01.webm" type="audio/webm"></audio>

[Sound after step 1 — WebM/Opus](audio/steps/step-01.webm)

## Step 2 — Blend the second source and animate the filters

Set `~soundStage = 2` in the full script. Add a triangle layer at -20 dB, 7 semitones and 0 cents. Add the quieter octave-down sine sub. The lowpass center starts from 1610 Hz and moves by 0.9 octaves under the second envelope. A positive depth opens the spectral ceiling; a negative depth moves the notch downward. The serial second filter keeps the specified high or low edge under control. Exact wavetable morphing, Warp/Fold and free-running source modulation are not implemented; the code below defines the chosen static spectra and note-local drift.

| SuperCollider control | Value |
| --- | --- |
| Secondary layer | triangle, -20 dB; 7 st; 0 cents |
| Filter 1 | Lowpass, 1610 Hz base, 0.9 octave depth |
| Filter contour | 2.2 / 3.3 / 0.65 / 3.5 |
| Filter 2 | Highpass at 95.0 Hz |
| Pulse width | Not used |

<audio controls preload="none" aria-label="SuperCollider Indigo Arc after step 2"><source src="audio/steps/step-02.webm" type="audio/webm"></audio>

[Sound after step 2 — WebM/Opus](audio/steps/step-02.webm)

## Step 3 — Add moving stereo chorus

Set `~soundStage = 3` in the full script. Move two delay taps around 20 ms by ±4.6 ms at 0.38 Hz, with opposite phases and 24% wet mix. Highpass only the wet inputs at 200 Hz to leave the direct low body clear. Scale side information by 1.1; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.

| SuperCollider control | Value |
| --- | --- |
| Tap center / excursion | 20 / ±4.6 ms |
| Rate / wet | 0.38 Hz / 24% |
| Wet highpass | 200 Hz |
| Width / feedback | 1.1 / 0 |
| Warmth shaping | 12% smooth-drive interpretation |

<audio controls preload="none" aria-label="SuperCollider Indigo Arc after step 3"><source src="audio/steps/step-03.webm" type="audio/webm"></audio>

[Sound after step 3 — WebM/Opus](audio/steps/step-03.webm)

## Step 4 — Surround the tone with a damped room

Set `~soundStage = 4` and evaluate the full block. Feed the preceding signal into `FreeVerb2`, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.

The SuperCollider room value is 0.813934 and damping is 0.79375. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.

| SuperCollider room control | Value |
| --- | --- |
| FreeVerb2 internal mix | 1, wet output only |
| Room | 0.813934 |
| Damping | 0.79375 |
| Predelay | 25 ms |
| External room wet | 28% |

| SuperCollider control | Value |
| --- | --- |
| Room side multiplier | 1 |
| Room input cuts | Off |

<audio controls preload="none" aria-label="SuperCollider Indigo Arc after step 4"><source src="audio/steps/step-04.webm" type="audio/webm"></audio>

[Sound after step 4 — WebM/Opus](audio/steps/step-04.webm)

## Step 5 — Set the final width and gain

Set `~soundStage = 5` in the full script. Use 3.44 dB gain after the effects. Scale the side signal by 1.05, preserving the center. Highpass only the side at 180 Hz to focus the lowest frequencies. Apply `LeakDC` DC removal with coefficient 0.995. The fixed `~soundOutputScale` gain follows the complete effect chain at every stage. The effects Synth reads the stereo bus after the note group, and continues through note releases.

| SuperCollider control | Value |
| --- | --- |
| Final gain | 3.44 dB |
| Width | 1.05 × side |
| Bass side cutoff | 180 Hz |
| DC removal | LeakDC, coefficient 0.995 |

<audio controls preload="none" aria-label="SuperCollider Indigo Arc after step 5"><source src="audio/steps/step-05.webm" type="audio/webm"></audio>

[Sound after step 5 — WebM/Opus](audio/steps/step-05.webm)

## Downloads and settings

[Finished sound — WebM/Opus](audio/indigo-arc.webm) · [Complete settings](ALL_PARAMETERS.md) · [Ableton version](/tutorials/indigo-arc/) · [Csound version](/tutorials/indigo-arc/csound/)

## Full SuperCollider script

The complete Indigo Arc instrument uses stock SuperCollider units. Set `~soundStage` from 1 to 5 and evaluate the entire block again to select a cumulative stage. Wait for the ready message; `~soundNote.(60, 0.8, 1)` plays MIDI 60 at velocity 0.8 with a one-second held duration. Held duration controls when release begins, while each source's decay and modulation continue independently. `~soundStop.()` frees the active instrument and its effects. This block replaces the previously installed PlayGrid instrument in the same interpreter.

```supercollider
(
~soundStage = 5;
~soundOutputScale = 1.48384;
~soundRelease = 3.5;
~soundNames = (motion: \pgIndigoArcMotion, voice: \pgIndigoArcVoice, effects: \pgIndigoArcEffects);
~pgWave = { |freq, amplitude=1, phase=0, partials=#[1]|
    Mix(partials.collect { |weight, i|
        var harmonic = freq * (i + 1);
        SinOsc.ar(harmonic.clip(0.01, 22000), phase * 2pi * (i + 1)) * weight * (harmonic < 22000)
    }) * amplitude;
};
~pgTriangle = { |freq, phase=0|
    var partials = Array.fill(31, { |i|
        var n = i + 1;
        if(n.odd) { ((-1) ** ((n - 1) / 2)) * 8 / (pi.squared * n.squared) } { 0 }
    });
    ~pgWave.(freq, 1, phase, partials);
};
~soundDefs = [
    SynthDef(\pgIndigoArcMotion, { |out=0| Out.kr(out, DC.kr(0)) }),
    SynthDef(\pgIndigoArcVoice, { |out=0, midi=60, velocity=0.8, gate=1, startMidi=60|
        var stage = ~soundStage;
    var aL = 0, aR = 0, aSub = 0, aV0 = 0, aV1 = 0, aV2 = 0, aW0 = 0, aW1 = 0;
    var aW2 = 0, iHz = 0, iVelocity = 0, kAmp = 0, kCut = 0, kFilter = 0, kGain = 0, kJ0 = 0;
    var kJ1 = 0, kJ2 = 0;
    iHz = (midi).midicps;
    iVelocity = (velocity).clip(0, 1);
    kJ0 = (SinOsc.kr(0.1, 0.0 * 2pi) * 1.44);
    aV0 = (~pgTriangle.((iHz * (2 ** (((0 - 10.799999999999999) + kJ0) / 1200))), 0.0) * ((0 - 10.0)).dbamp);
    if((stage >= 2)) {
    aW0 = (~pgTriangle.((iHz * (2 ** ((7.0 / 12) + ((0 - 10.799999999999999) / 1200)))), 0.0) * ((0 - 20.0)).dbamp);
    aV0 = (aV0 + aW0);
    };
    kJ1 = (SinOsc.kr(0.13, 0.3333333333333333 * 2pi) * 1.44);
    aV1 = (~pgTriangle.((iHz * (2 ** ((0.0 + kJ1) / 1200))), 0.3333333333333333) * ((0 - 10.0)).dbamp);
    if((stage >= 2)) {
    aW1 = (~pgTriangle.((iHz * (2 ** ((7.0 / 12) + (0.0 / 1200)))), 0.3333333333333333) * ((0 - 20.0)).dbamp);
    aV1 = (aV1 + aW1);
    };
    kJ2 = (SinOsc.kr(0.16, 0.6666666666666666 * 2pi) * 1.44);
    aV2 = (~pgTriangle.((iHz * (2 ** ((10.799999999999999 + kJ2) / 1200))), 0.6666666666666666) * ((0 - 10.0)).dbamp);
    if((stage >= 2)) {
    aW2 = (~pgTriangle.((iHz * (2 ** ((7.0 / 12) + (10.799999999999999 / 1200)))), 0.6666666666666666) * ((0 - 20.0)).dbamp);
    aV2 = (aV2 + aW2);
    };
    aL = ((((aV0 * 0.8) + (aV1 * 0.5)) + (aV2 * 0.20000000000000007)) / 1.5);
    aR = ((((aV0 * 0.2) + (aV1 * 0.5)) + (aV2 * 0.8)) / 1.5);
    if((stage >= 2)) {
    aSub = (SinOsc.ar((iHz * 0.5), 0 * 2pi) * ((0 - 20.0)).dbamp);
    aL = (aL + aSub);
    aR = (aR + aSub);
    };
    if((stage >= 2)) {
    kFilter = EnvGen.kr(Env([0, 1, 0.65, 0], [2.2, 3.3, 3.5], \lin, releaseNode: 2), gate);
    kCut = ((1610.0 * (2 ** ((0.9 * kFilter) + ((0.0 * (midi - 60)) / 12))))).clip(30, 18000);
    aL = RLPF.ar(aL, (kCut).clip(20, 18000), (1 / 1.12).clip(0.05, 2));
    aL = HPF.ar(aL, (95.0).clip(20, 18000));
    aR = RLPF.ar(aR, (kCut).clip(20, 18000), (1 / 1.12).clip(0.05, 2));
    aR = HPF.ar(aR, (95.0).clip(20, 18000));
    };
    kAmp = EnvGen.kr(Env([0, 1, 0.7943282347242815, 0], [1.18, 2.62, 3.04], \lin, releaseNode: 2), gate);
    kGain = ((kAmp * ((0 - 9.0)).dbamp) * (0.4 + (0.6 * iVelocity)));
    aL = (aL * kGain);
    aR = (aR * kGain);
    Out.ar(out, [aL, aR]);
        EnvGen.kr(Env.asr(0.0001, 1, 3.5), gate, doneAction: 2);
    }),
    SynthDef(\pgIndigoArcEffects, { |in=0, out=0|
        var stage = ~soundStage;
        var outputScale = ~soundOutputScale;
        var input = In.ar(in, 2);
    var feedback = LocalIn.ar(2);
    var aChFbL = 0, aChFbR = 0, aChInL = 0, aChInR = 0, aChMid = 0, aChSide = 0, aChTimeL = 0, aChTimeR = 0;
    var aEndMid = 0, aEndSide = 0, aL = 0, aR = 0, aRoomInL = 0, aRoomInR = 0, aRoomL = 0, aRoomMid = 0;
    var aRoomPreL = 0, aRoomPreR = 0, aRoomR = 0, aRoomSide = 0, aTapL = 0, aTapR = 0, kCh = 0, room28 = 0;
    aL = input[0];
    aR = input[1];
    if((stage >= 3)) {
    aChFbL = feedback[0];
    aChFbR = feedback[1];
    aChInL = HPF.ar(aL, (200.0).clip(20, 18000));
    aChInR = HPF.ar(aR, (200.0).clip(20, 18000));
    kCh = (SinOsc.kr(0.38, 0 * 2pi) * 1);
    aChTimeL = K2A.ar((20 + (4.6000000000000005 * kCh)));
    aChTimeR = K2A.ar((20 - (4.6000000000000005 * kCh)));
    aTapL = DelayC.ar((aChInL + (aChFbL * 0)), 80 / 1000, (aChTimeL / 1000).clip(0.00002, 80 / 1000));
    aTapR = DelayC.ar((aChInR + (aChFbR * 0)), 80 / 1000, (aChTimeR / 1000).clip(0.00002, 80 / 1000));
    aChFbL = aTapL;
    aChFbR = aTapR;
    aL = ((aL * 0.76) + (aTapL * 0.24));
    aR = ((aR * 0.76) + (aTapR * 0.24));
    aChMid = ((aL + aR) * 0.5);
    aChSide = (((aL - aR) * 0.5) * 1.1);
    aL = (aChMid + aChSide);
    aR = (aChMid - aChSide);
    aL = (((aL * 1.12)).tanh / 1.12);
    aR = (((aR * 1.12)).tanh / 1.12);
    };
    if((stage >= 4)) {
    aRoomInL = aL;
    aRoomPreL = DelayN.ar(aRoomInL, 0.025, 0.025);
    aRoomInR = aR;
    aRoomPreR = DelayN.ar(aRoomInR, 0.025, 0.025);
    room28 = FreeVerb2.ar(aRoomPreL, aRoomPreR, 1, 0.813934, 0.79375);
    aRoomL = room28[0];
    aRoomR = room28[1];
    aRoomMid = ((aRoomL + aRoomR) * 0.5);
    aRoomSide = (((aRoomL - aRoomR) * 0.5) * 1);
    aL = ((aL * 0.72) + ((aRoomMid + aRoomSide) * 0.28));
    aR = ((aR * 0.72) + ((aRoomMid - aRoomSide) * 0.28));
    };
    if((stage >= 5)) {
    aEndMid = ((aL + aR) * 0.5);
    aEndSide = (((aL - aR) * 0.5) * 1.05);
    aEndSide = HPF.ar(aEndSide, (180.0).clip(20, 18000));
    aL = ((aEndMid + aEndSide) * (3.44).dbamp);
    aL = LeakDC.ar(aL, 0.995);
    aR = ((aEndMid - aEndSide) * (3.44).dbamp);
    aR = LeakDC.ar(aR, 0.995);
    };
    LocalOut.ar([aChFbL, aChFbR].collect { |channel| channel + DC.ar(0) });
    Out.ar(out, [((aL * 1) * outputScale), ((aR * 1) * outputScale)]);
    })
];
~soundStop = {
    if(~cirrusGroup.notNil) { ~cirrusGroup.free; ~cirrusGroup = nil };
    if(~cirrusAudio.notNil) { ~cirrusAudio.free; ~cirrusAudio = nil };
    if(~cirrusMotion.notNil) { ~cirrusMotion.free; ~cirrusMotion = nil };
    if(~pgGroup.notNil) { ~pgGroup.free; ~pgGroup = nil };
    if(~pgAudio.notNil) { ~pgAudio.free; ~pgAudio = nil };
    if(~pgMotion.notNil) { ~pgMotion.free; ~pgMotion = nil };
};
~soundInstall = {
    s.waitForBoot {
        ~soundStop.();
        ~soundDefs.do { |definition| definition.add };
        s.sync;
        ~pgAudio = Bus.audio(s, 2);
        ~pgMotion = Bus.control(s, 1);
        ~pgGroup = Group.head(s);
        ~pgLastMidi = 60;
        Synth.head(~pgGroup, ~soundNames.motion, [\out, ~pgMotion]);
        ~pgVoices = Group.tail(~pgGroup);
        Synth.tail(~pgGroup, ~soundNames.effects, [\in, ~pgAudio]);
        "Indigo Arc ready".postln;
    };
};
~soundNote = { |midi=60, velocity=0.8, hold=1|
    var note = Synth.head(~pgVoices, ~soundNames.voice, [
        \out, ~pgAudio, \midi, midi, \velocity, velocity.clip(0, 1),
        \startMidi, ~pgLastMidi
    ]);
    ~pgLastMidi = midi;
    SystemClock.sched(hold, { note.set(\gate, 0); nil });
    note;
};
if(~soundOffline != true) { ~soundInstall.() };
)
```

[Read on playgrid.cc](https://playgrid.cc/tutorials/indigo-arc/supercollider/)
