# Lo-Fi Bell — complete Csound settings

## Note and effect connections

Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Its left and right outputs accumulate on shared buses. Instrument 90 processes the buses once per control block, clears the inputs and keeps effect memories active through the tails. Envelopes with release segments extend the note automatically. The score is an audible pitch-and-touch example; the synthesis controls are independent of its particular notes.

## Csound interpretation

These are explicit Csound models, not identical implementations of the Ableton devices. Wavetable positions, proprietary oscillator engines, physical-model macros, filter circuits, envelope slopes and effect algorithms can differ. Modulation depths are specified in octaves, cents or milliseconds rather than treated as universally interchangeable matrix values. Controller inputs such as pitch bend, modulation wheel, pressure and per-note expression are not mapped. Independent score notes do not implement Live's monophonic note-priority or legato system. Any pitch memory or drift included in this instrument is described in its steps.



## Signal path and controls

### Stage 1 — Tune the three bell components

Use triangles at +28 st/+30 cents and +30 st/−15 cents, at −21 and −24 dB. Add a sine one octave below the played pitch at −6 dB. Those unequal high intervals against the low foundation establish the bell character. The sine sub omits the source 12% tone coloration. Use 1 ms attack, 4.3 s decay to −38 dB and 350 ms release.

| Csound control | Value |
| --- | --- |
| High tones | +28 st +30 cents / +30 st −15 cents |
| Levels | −21 / −24 / sub −6 dB |
| Sub | Sine, octave down |
| Amplitude | 1 ms / 4.3 s / −38 dB / 350 ms |
| Instrument / touch | −7 dB / 50% |

### Stage 2 — Round the high tones with a fixed filter

Use a 1650 Hz ladder lowpass at 0.34 resonance, with no note tracking or envelope movement. Higher bell components become softer as they rise beyond the fixed cutoff. This replaces PRD with a different resonant response.

| Csound control | Value |
| --- | --- |
| Lowpass | 1650 Hz, resonance 0.34 |
| Tracking / modulation | Off |

### Stage 3 — Surround the tone with a damped room

Feed the preceding signal through 8 ms predelay into `reverbsc`, with feedback 0.6271, 4500 Hz damping and 44% wet mix. Predelay leaves the initial articulation in front; feedback prolongs the tail, while damping darkens repeated circulation. The source room decay setting is 1.5 seconds, but Csound feedback is not a decay-time control: this is an interpretation of that space, with different diffusion and modulation. 

| Csound control | Value |
| --- | --- |
| Source decay target | 1.5 s (not a measured Csound decay) |
| Predelay / feedback | 8 ms / 0.6271 |
| Damping / wet | 4500 Hz / 44% |
| Room side multiplier | 1 |
| Room input cuts | Off |

### Stage 4 — Add panning and digital grain

Move the left and right gains oppositely at 1 Hz by ±22%. This moves the bell and preceding room together. The simple complementary gain model interprets Auto Pan without its additional shape controls. Hold incoming samples at 16000 Hz and round their amplitudes to 12 signed bits, then blend 40% of that branch with the direct tone. The held samples add staircase texture and the rounding roughens quieter portions. This simple clocked quantizer interprets Redux without its proprietary jitter or shaping behavior. No pre- or post-filter is added.

| Csound control | Value |
| --- | --- |
| Panning | 1 Hz sine; ±22% opposite channel gain |
| Hold rate | 16000 Hz |
| Signed bits / wet | 12 / 40% |

## Output and signal rates

The script uses 48000 Hz, 16-sample control blocks and stereo output. The fixed output-scale control is `1.752863` and follows the whole chain at every stage, separate from any final gain step. DC-removal blocks, where enabled, use order 2048 to limit low-note attenuation; they add processing delay.

[Build guide and full script](BUILD_GUIDE.md#full-csound-script) · [Starting settings](STARTING_STATE.md)

[Read on playgrid.cc](https://playgrid.cc/tutorials/lo-fi-bell/csound/settings/)
