# Build Random Filter Keys in Csound

[SuperCollider version](/tutorials/random-filter-keys/supercollider/): the same sound interpreted with stock SuperCollider synthesis units.

Random Filter Keys in Csound follows the sound-shaping ideas of the [Ableton Wavetable version](/tutorials/random-filter-keys/), using the explicit oscillators, contours and effects below.

[Starting settings](STARTING_STATE.md) · [Complete settings](ALL_PARAMETERS.md). The complete script follows the final step and related sounds.

## Step 1 — Build the two-octave resonant body

Set `giStage init 1` in the full script. Blend two saws at −6 dB each: one at the note plus two cents, the other an octave down. Add an octave-down sine at −15 dB. A 300 Hz tracked ladder lowpass uses resonance 0.67 and +3 dB smooth drive. The amplitude has 57 ms attack, decay and release with −2.3 dB sustain; instrument gain is −19 dB with 50% touch response.

| Csound control | Value |
| --- | --- |
| Saw / sub | −6/−6 dB saws; octave-down sine −15 dB |
| Filter | 300 Hz, full tracking, 0.67 resonance, +3 dB drive |
| Amplitude | 57 ms / 57 ms / −2.3 dB / 57 ms |
| Instrument | −19 dB |

<audio controls preload="none" aria-label="Csound Random Filter Keys after step 1"><source src="audio/steps/step-01.webm" type="audio/webm"></audio>

[Sound after step 1 — WebM/Opus](audio/steps/step-01.webm)

## Step 2 — Jump between random filter states

Set `giStage init 2` in the full script. A sample-and-hold random value changes at 2.67 Hz. Use it for ±1 octave of cutoff and ±3 dB of input drive. Positive values brighten and push the resonant filter, while negative values darken it. Each note has its own random generator; the exact source noise waveform and modulation scale differ.

| Csound control | Value |
| --- | --- |
| Random rate | 2.67 Hz |
| Cutoff / drive movement | ±1 octave / ±3 dB |

<audio controls preload="none" aria-label="Csound Random Filter Keys after step 2"><source src="audio/steps/step-02.webm" type="audio/webm"></audio>

[Sound after step 2 — WebM/Opus](audio/steps/step-02.webm)

## Step 3 — Add filtered stereo echoes

Set `giStage init 3` in the full script. Use 750 ms left and 775 ms right, 25% feedback and 30% wet. Feed each channel back into itself, keeping the unequal timing paths independent. Filter each echo around 900 Hz, with a 7-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per 16-sample block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.

| Csound control | Value |
| --- | --- |
| Times | 750 / 775 ms |
| Feedback / wet | 25% / 30% |
| Routing | Independent channels |
| Filter center / width | 900 Hz / 7 octaves |
| Time LFO | 0 Hz, ±0% |

<audio controls preload="none" aria-label="Csound Random Filter Keys after step 3"><source src="audio/steps/step-03.webm" type="audio/webm"></audio>

[Sound after step 3 — WebM/Opus](audio/steps/step-03.webm)

## Step 4 — Surround the tone with a damped room

Set `giStage init 4` in the full script. Feed the preceding signal through 5 ms predelay into `reverbsc`, with feedback 0.9512, 1800 Hz damping and 15% wet mix. Predelay leaves the initial articulation in front; feedback prolongs the tail, while damping darkens repeated circulation. The source room decay setting is 14 seconds, but Csound feedback is not a decay-time control: this is an interpretation of that space, with different diffusion and modulation. 

| Csound control | Value |
| --- | --- |
| Source decay target | 14 s (not a measured Csound decay) |
| Predelay / feedback | 5 ms / 0.9512 |
| Damping / wet | 1800 Hz / 15% |
| Room side multiplier | 1 |
| Room input cuts | Off |

<audio controls preload="none" aria-label="Csound Random Filter Keys after step 4"><source src="audio/steps/step-04.webm" type="audio/webm"></audio>

[Sound after step 4 — WebM/Opus](audio/steps/step-04.webm)

## Downloads and settings

[Finished sound — WebM/Opus](audio/Random-Filter-Keys.webm) · [Complete settings](ALL_PARAMETERS.md) · [Ableton version](/tutorials/random-filter-keys/)

## Full Csound script

This document contains the complete Random Filter Keys source, shared effects and example score. `giStage` selects the cumulative stages from 1 to 4; 4 is the finished sound.

```csound
<CsoundSynthesizer>
<CsOptions>
-odac -d
</CsOptions>
<CsInstruments>
sr = 48000
ksmps = 16
nchnls = 2
0dbfs = 1

giStage init 4
giOutputScale init 4.070113
giSine ftgen 0, 0, 16384, 10, 1
gaLeft init 0
gaRight init 0
seed 37
instr 1
  iHz = cpsmidinn(p4)
  iVelocity = limit(p5, 0, 1)
  aSaw1 vco2 ampdb(-6),iHz*pow(2,2/1200),0
  aSaw2 vco2 ampdb(-6),iHz*0.5,0
  aSub oscili ampdb(-15),iHz*0.5,giSine
  aSource = aSaw1+aSaw2+aSub
  kRandom = 0
  if giStage >= 2 then
    kNew randomh -1,1,2.67
    kRandom = kNew
  endif
  kCut = limit(300*pow(2,(p4-60)/12+kRandom),30,18000)
  aDrive = tanh(aSource*ampdb(3+3*kRandom))
  aSource moogladder aDrive,kCut,0.67
  kAmp linsegr 0, 0.057, 1, 0.057, 0.7673614893618189, 0.057, 0
  aL = aSource*kAmp*ampdb(-19)*(0.5+0.5*iVelocity)
  aR = aL
  gaLeft = gaLeft+aL
  gaRight = gaRight+aR
endin
instr 90
  aL = gaLeft
  aR = gaRight
  if giStage >= 3 then
    aDelFbL init 0
    aDelFbR init 0
    kDelMotion = 0
    aDelTimeL interp 750.0*(1+0*kDelMotion)
    aDelTimeR interp 775.0*(1-0*kDelMotion)
    aDelSendL = aL
    aDelSendR = aR
    aEchoL vdelay3 aDelSendL+aDelFbL*0.25, aDelTimeL, 2200
    aEchoR vdelay3 aDelSendR+aDelFbR*0.25, aDelTimeR, 2200
    kDelCenter = 900*pow(2, 0*kDelMotion)
    aEchoL butterhp aEchoL, kDelCenter/pow(2, 3.5)
    aEchoL butterlp aEchoL, min(18000,kDelCenter*pow(2, 3.5))
    aEchoR butterhp aEchoR, kDelCenter/pow(2, 3.5)
    aEchoR butterlp aEchoR, min(18000,kDelCenter*pow(2, 3.5))
    aDelFbL = aEchoL
    aDelFbR = aEchoR
    aL = aL*0.7+aEchoL*0.3
    aR = aR*0.7+aEchoR*0.3
  endif
  if giStage >= 4 then
    aRoomInL = aL
    aRoomPreL delay aRoomInL, 0.005
    aRoomInR = aR
    aRoomPreR delay aRoomInR, 0.005
    aRoomL, aRoomR reverbsc aRoomPreL, aRoomPreR, 0.9512, 1800, sr, 0.4
    aRoomMid = (aRoomL+aRoomR)*0.5
    aRoomSide = (aRoomL-aRoomR)*0.5*1
    aL = aL*0.85+(aRoomMid+aRoomSide)*0.15
    aR = aR*0.85+(aRoomMid-aRoomSide)*0.15
  endif
  outs aL*giOutputScale, aR*giOutputScale
  clear gaLeft, gaRight
endin
</CsInstruments>
<CsScore>
; p3 held seconds, p4 MIDI pitch, p5 velocity
i 1 0 2 48 0.75
i 1 3 2 55 0.85
i 1 6 2 60 0.7
i 90 0 40.057
e
</CsScore>
</CsoundSynthesizer>
```

[Read on playgrid.cc](https://playgrid.cc/tutorials/random-filter-keys/csound/)
