# Resonant Octave Mist — complete SuperCollider settings

## Signal flow and implementation

`~soundStage` is compiled into the SynthDefs. Re-evaluate the complete block after changing it; source and effects are then replaced together. The fixed output multiplier `~soundOutputScale` is 215.2053 and applies after the whole chain at every stage. It is separate from any final gain step.

`EnvGen` supplies the explicit linear or exponential contours. Exponential floors stay positive. Closing the gate begins each release; a separate silent lifetime envelope frees the note after the longest source release. Shared effects continue independently.

`BPF` and `BRF` use bandwidth divided by center frequency as reciprocal Q. The narrow noise resonances, where present, use SuperCollider normalization and need their own instrument gain.

`LocalIn`/`LocalOut` carry all feedback paths in a single multichannel loop. Recirculation adds one server processing block to each delay; changing block size therefore changes short comb/flanger tuning. `DelayC` uses seconds, converted from the millisecond tap values in the design.

`FreeVerb2` replaces the diffuse room with its own room and damping controls, both dimensionless. The per-stage values below are specific to this algorithm and do not specify a measured decay time or damping frequency.

## Synthesis and effect controls

### Stage 1 — Make a narrow, singing noise band

Select `~soundStage = 1` and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.

Set `~soundStage = 1` in the full script. Filter quiet white noise through two narrow resonances. The center is 890 Hz at MIDI 69 and tracks the keyboard; the channels differ by seven cents. A 0.30 Hz filter motion and slower pitch drift loosen the ringing. Shape amplitude with a 2.20 s attack, full sustain and 3.20 s release. This noise-band model approximates the source resonant tone without implementing Drift's self-oscillating filter.

| SuperCollider control | Value |
| --- | --- |
| Noise / instrument | −24 / −12 dB |
| Centers | 890 Hz at MIDI 69, full tracking; 7-cent channel separation |
| Bandwidth | Center / 60 |
| Motion | 0.30 Hz, ±0.003 octaves; slower ±3 cents |
| Amplitude | 2.20 s attack, full sustain, 3.20 s release |

### Stage 2 — Add the upper octave echo

Set `~soundStage = 2` in the full script. Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 2, plus 3 cents. The delay begins at 375 ms and moves across the additional window. Blend 4% shifted signal, lowpassed at 2000 Hz, with 3.3% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.

| SuperCollider control | Value |
| --- | --- |
| Pitch ratio / cents | 2 / 3 |
| Base delay / window | 375 / 100 ms |
| Feedback / wet | 3.3% / 4% |
| Tone | 2000 Hz |

### Stage 3 — Add the lower octave echo

Set `~soundStage = 3` in the full script. Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 0.5, plus -3 cents. The delay begins at 500 ms and moves across the additional window. Blend 2.5% shifted signal, lowpassed at 1800 Hz, with 6.8% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.

| SuperCollider control | Value |
| --- | --- |
| Pitch ratio / cents | 0.5 / -3 |
| Base delay / window | 500 / 100 ms |
| Feedback / wet | 6.8% / 2.5% |
| Tone | 1800 Hz |

### Stage 4 — Surround the tone with a damped room

Set `~soundStage = 4` and evaluate the full block. Feed the preceding signal into `FreeVerb2`, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.

The SuperCollider room value is 0.96 and damping is 0.8875. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.

| SuperCollider room control | Value |
| --- | --- |
| FreeVerb2 internal mix | 1, wet output only |
| Room | 0.96 |
| Damping | 0.8875 |
| Predelay | 10 ms |
| External room wet | 50% |

| SuperCollider control | Value |
| --- | --- |
| Room side multiplier | 1 |
| Room input cuts | Off |

## Connected instrument

The [full SuperCollider script](/tutorials/resonant-octave-mist/supercollider/#full-supercollider-script) contains the complete voice, shared effects, bus ordering and note helper. No external sample or third-party unit is required.

[Read on playgrid.cc](https://playgrid.cc/tutorials/resonant-octave-mist/supercollider/settings/)
