# Build Resonant Octave Mist in SuperCollider

A stock-unit SuperCollider interpretation of [the Ableton sound](/tutorials/resonant-octave-mist/) and its [Csound version](/tutorials/resonant-octave-mist/csound/). Each stage changes the source or its effect chain; oscillator, filter, modal and room algorithms differ across platforms.

[Starting settings](STARTING_STATE.md) · [Complete settings](ALL_PARAMETERS.md). The full runnable script ends this guide.

## Step 1 — Make a narrow, singing noise band

Select `~soundStage = 1` and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.

Set `~soundStage = 1` in the full script. Filter quiet white noise through two narrow resonances. The center is 890 Hz at MIDI 69 and tracks the keyboard; the channels differ by seven cents. A 0.30 Hz filter motion and slower pitch drift loosen the ringing. Shape amplitude with a 2.20 s attack, full sustain and 3.20 s release. This noise-band model approximates the source resonant tone without implementing Drift's self-oscillating filter.

| SuperCollider control | Value |
| --- | --- |
| Noise / instrument | −24 / −12 dB |
| Centers | 890 Hz at MIDI 69, full tracking; 7-cent channel separation |
| Bandwidth | Center / 60 |
| Motion | 0.30 Hz, ±0.003 octaves; slower ±3 cents |
| Amplitude | 2.20 s attack, full sustain, 3.20 s release |

<audio controls preload="none" aria-label="SuperCollider Resonant Octave Mist after step 1"><source src="audio/steps/step-01.webm" type="audio/webm"></audio>

[Sound after step 1 — WebM/Opus](audio/steps/step-01.webm)

## Step 2 — Add the upper octave echo

Set `~soundStage = 2` in the full script. Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 2, plus 3 cents. The delay begins at 375 ms and moves across the additional window. Blend 4% shifted signal, lowpassed at 2000 Hz, with 3.3% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.

| SuperCollider control | Value |
| --- | --- |
| Pitch ratio / cents | 2 / 3 |
| Base delay / window | 375 / 100 ms |
| Feedback / wet | 3.3% / 4% |
| Tone | 2000 Hz |

<audio controls preload="none" aria-label="SuperCollider Resonant Octave Mist after step 2"><source src="audio/steps/step-02.webm" type="audio/webm"></audio>

[Sound after step 2 — WebM/Opus](audio/steps/step-02.webm)

## Step 3 — Add the lower octave echo

Set `~soundStage = 3` in the full script. Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 0.5, plus -3 cents. The delay begins at 500 ms and moves across the additional window. Blend 2.5% shifted signal, lowpassed at 1800 Hz, with 6.8% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.

| SuperCollider control | Value |
| --- | --- |
| Pitch ratio / cents | 0.5 / -3 |
| Base delay / window | 500 / 100 ms |
| Feedback / wet | 6.8% / 2.5% |
| Tone | 1800 Hz |

<audio controls preload="none" aria-label="SuperCollider Resonant Octave Mist after step 3"><source src="audio/steps/step-03.webm" type="audio/webm"></audio>

[Sound after step 3 — WebM/Opus](audio/steps/step-03.webm)

## Step 4 — Surround the tone with a damped room

Set `~soundStage = 4` and evaluate the full block. Feed the preceding signal into `FreeVerb2`, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.

The SuperCollider room value is 0.96 and damping is 0.8875. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.

| SuperCollider room control | Value |
| --- | --- |
| FreeVerb2 internal mix | 1, wet output only |
| Room | 0.96 |
| Damping | 0.8875 |
| Predelay | 10 ms |
| External room wet | 50% |

| SuperCollider control | Value |
| --- | --- |
| Room side multiplier | 1 |
| Room input cuts | Off |

<audio controls preload="none" aria-label="SuperCollider Resonant Octave Mist after step 4"><source src="audio/steps/step-04.webm" type="audio/webm"></audio>

[Sound after step 4 — WebM/Opus](audio/steps/step-04.webm)

## Downloads and settings

[Finished sound — WebM/Opus](audio/Resonant-Octave-Mist.webm) · [Complete settings](ALL_PARAMETERS.md) · [Ableton version](/tutorials/resonant-octave-mist/) · [Csound version](/tutorials/resonant-octave-mist/csound/)

## Full SuperCollider script

The complete Resonant Octave Mist instrument uses stock SuperCollider units. Set `~soundStage` from 1 to 4 and evaluate the entire block again to select a cumulative stage. Wait for the ready message; `~soundNote.(60, 0.8, 1)` plays MIDI 60 at velocity 0.8 with a one-second held duration. Held duration controls when release begins, while each source's decay and modulation continue independently. `~soundStop.()` frees the active instrument and its effects. This block replaces the previously installed PlayGrid instrument in the same interpreter.

```supercollider
(
~soundStage = 4;
~soundOutputScale = 215.2053;
~soundRelease = 3.2;
~soundNames = (motion: \pgResonantOctaveMistMotion, voice: \pgResonantOctaveMistVoice, effects: \pgResonantOctaveMistEffects);

~soundDefs = [
    SynthDef(\pgResonantOctaveMistMotion, { |out=0| Out.kr(out, DC.kr(0)) }),
    SynthDef(\pgResonantOctaveMistVoice, { |out=0, midi=60, velocity=0.8, gate=1, startMidi=60|
        var stage = ~soundStage;
    var aL = 0, aLeft = 0, aNoise = 0, aR = 0, aRight = 0, iHz = 0, iVelocity = 0, kAmp = 0;
    var kCenter = 0, kDrift = 0, kMotion = 0;
    iHz = (midi).midicps;
    iVelocity = (velocity).clip(0, 1);
    aNoise = WhiteNoise.ar(((0 - 24)).dbamp);
    kMotion = (SinOsc.kr(0.30, 0 * 2pi) * 1);
    kDrift = (SinOsc.kr(0.13, 0.2 * 2pi) * 3);
    kCenter = ((890 * (2 ** ((((midi - 69) / 12) + ((3.5 + kDrift) / 1200)) + (0.003 * kMotion))))).clip(30, 11000);
    aLeft = BPF.ar(aNoise, (kCenter).clip(20, 18000), ((kCenter / 60) / kCenter).clip(0.001, 4));
    aRight = BPF.ar(aNoise, ((kCenter * (2 ** ((0 - 7) / 1200)))).clip(20, 18000), ((kCenter / 60) / (kCenter * (2 ** ((0 - 7) / 1200)))).clip(0.001, 4));
    kAmp = EnvGen.kr(Env([0, 1, 1, 0], [2.2, 0.6, 3.2], \lin, releaseNode: 2), gate);
    aL = (((aLeft * kAmp) * ((0 - 12)).dbamp) * (0.5 + (0.5 * iVelocity)));
    aR = (((aRight * kAmp) * ((0 - 12)).dbamp) * (0.5 + (0.5 * iVelocity)));
    Out.ar(out, [aL, aR]);
        EnvGen.kr(Env.asr(0.0001, 1, 3.2), gate, doneAction: 2);
    }),
    SynthDef(\pgResonantOctaveMistEffects, { |in=0, out=0|
        var stage = ~soundStage;
        var outputScale = ~soundOutputScale;
        var input = In.ar(in, 2);
    var feedback = LocalIn.ar(4);
    var aDownFeedbackL = 0, aDownFeedbackR = 0, aDownPhase = 0, aDownPhase2 = 0, aDownTap2L = 0, aDownTap2R = 0, aDownTapL = 0, aDownTapR = 0;
    var aDownTime = 0, aDownTime2 = 0, aDownWetL = 0, aDownWetR = 0, aDownWin = 0, aDownWin2 = 0, aL = 0, aR = 0;
    var aRoomInL = 0, aRoomInR = 0, aRoomL = 0, aRoomMid = 0, aRoomPreL = 0, aRoomPreR = 0, aRoomR = 0, aRoomSide = 0;
    var aUpFeedbackL = 0, aUpFeedbackR = 0, aUpPhase = 0, aUpPhase2 = 0, aUpTap2L = 0, aUpTap2R = 0, aUpTapL = 0, aUpTapR = 0;
    var aUpTime = 0, aUpTime2 = 0, aUpWetL = 0, aUpWetR = 0, aUpWin = 0, aUpWin2 = 0, room51 = 0;
    aL = input[0];
    aR = input[1];
    if((stage >= 2)) {
    aUpFeedbackL = feedback[0];
    aUpFeedbackR = feedback[1];
    aUpPhase = Phasor.ar(0, (((2 * (2 ** (3 / 1200))) - 1) / 0.1) / SampleRate.ir, 0, 1);
    aUpPhase2 = ((aUpPhase + 0.5)).wrap(0, 1);
    aUpWin = (((aUpPhase * 3.14159265359)).sin ** 2);
    aUpWin2 = (((aUpPhase2 * 3.14159265359)).sin ** 2);
    aUpTime = (375.0 + ((1 - aUpPhase) * 100));
    aUpTime2 = (375.0 + ((1 - aUpPhase2) * 100));
    aUpTapL = DelayC.ar((aL + (aUpFeedbackL * 0.033)), 2000 / 1000, (aUpTime / 1000).clip(0.00002, 2000 / 1000));
    aUpTap2L = DelayC.ar((aL + (aUpFeedbackL * 0.033)), 2000 / 1000, (aUpTime2 / 1000).clip(0.00002, 2000 / 1000));
    aUpWetL = ((aUpTapL * aUpWin) + (aUpTap2L * aUpWin2));
    aUpWetL = LPF.ar(aUpWetL, (2000).clip(20, 18000));
    aUpFeedbackL = aUpWetL;
    aL = ((aL * 0.96) + (aUpWetL * 0.04));
    aUpTapR = DelayC.ar((aR + (aUpFeedbackR * 0.033)), 2000 / 1000, (aUpTime / 1000).clip(0.00002, 2000 / 1000));
    aUpTap2R = DelayC.ar((aR + (aUpFeedbackR * 0.033)), 2000 / 1000, (aUpTime2 / 1000).clip(0.00002, 2000 / 1000));
    aUpWetR = ((aUpTapR * aUpWin) + (aUpTap2R * aUpWin2));
    aUpWetR = LPF.ar(aUpWetR, (2000).clip(20, 18000));
    aUpFeedbackR = aUpWetR;
    aR = ((aR * 0.96) + (aUpWetR * 0.04));
    };
    if((stage >= 3)) {
    aDownFeedbackL = feedback[2];
    aDownFeedbackR = feedback[3];
    aDownPhase = Phasor.ar(0, (((0.5 * (2 ** ((0 - 3) / 1200))) - 1) / 0.1) / SampleRate.ir, 0, 1);
    aDownPhase2 = ((aDownPhase + 0.5)).wrap(0, 1);
    aDownWin = (((aDownPhase * 3.14159265359)).sin ** 2);
    aDownWin2 = (((aDownPhase2 * 3.14159265359)).sin ** 2);
    aDownTime = (500.0 + ((1 - aDownPhase) * 100));
    aDownTime2 = (500.0 + ((1 - aDownPhase2) * 100));
    aDownTapL = DelayC.ar((aL + (aDownFeedbackL * 0.068)), 2000 / 1000, (aDownTime / 1000).clip(0.00002, 2000 / 1000));
    aDownTap2L = DelayC.ar((aL + (aDownFeedbackL * 0.068)), 2000 / 1000, (aDownTime2 / 1000).clip(0.00002, 2000 / 1000));
    aDownWetL = ((aDownTapL * aDownWin) + (aDownTap2L * aDownWin2));
    aDownWetL = LPF.ar(aDownWetL, (1800).clip(20, 18000));
    aDownFeedbackL = aDownWetL;
    aL = ((aL * 0.975) + (aDownWetL * 0.025));
    aDownTapR = DelayC.ar((aR + (aDownFeedbackR * 0.068)), 2000 / 1000, (aDownTime / 1000).clip(0.00002, 2000 / 1000));
    aDownTap2R = DelayC.ar((aR + (aDownFeedbackR * 0.068)), 2000 / 1000, (aDownTime2 / 1000).clip(0.00002, 2000 / 1000));
    aDownWetR = ((aDownTapR * aDownWin) + (aDownTap2R * aDownWin2));
    aDownWetR = LPF.ar(aDownWetR, (1800).clip(20, 18000));
    aDownFeedbackR = aDownWetR;
    aR = ((aR * 0.975) + (aDownWetR * 0.025));
    };
    if((stage >= 4)) {
    aRoomInL = aL;
    aRoomPreL = DelayN.ar(aRoomInL, 0.01, 0.01);
    aRoomInR = aR;
    aRoomPreR = DelayN.ar(aRoomInR, 0.01, 0.01);
    room51 = FreeVerb2.ar(aRoomPreL, aRoomPreR, 1, 0.96, 0.8875);
    aRoomL = room51[0];
    aRoomR = room51[1];
    aRoomMid = ((aRoomL + aRoomR) * 0.5);
    aRoomSide = (((aRoomL - aRoomR) * 0.5) * 1);
    aL = ((aL * 0.5) + ((aRoomMid + aRoomSide) * 0.5));
    aR = ((aR * 0.5) + ((aRoomMid - aRoomSide) * 0.5));
    };
    LocalOut.ar([aUpFeedbackL, aUpFeedbackR, aDownFeedbackL, aDownFeedbackR].collect { |channel| channel + DC.ar(0) });
    Out.ar(out, [((aL * 1) * outputScale), ((aR * 1) * outputScale)]);
    })
];
~soundStop = {
    if(~cirrusGroup.notNil) { ~cirrusGroup.free; ~cirrusGroup = nil };
    if(~cirrusAudio.notNil) { ~cirrusAudio.free; ~cirrusAudio = nil };
    if(~cirrusMotion.notNil) { ~cirrusMotion.free; ~cirrusMotion = nil };
    if(~pgGroup.notNil) { ~pgGroup.free; ~pgGroup = nil };
    if(~pgAudio.notNil) { ~pgAudio.free; ~pgAudio = nil };
    if(~pgMotion.notNil) { ~pgMotion.free; ~pgMotion = nil };
};
~soundInstall = {
    s.waitForBoot {
        ~soundStop.();
        ~soundDefs.do { |definition| definition.add };
        s.sync;
        ~pgAudio = Bus.audio(s, 2);
        ~pgMotion = Bus.control(s, 1);
        ~pgGroup = Group.head(s);
        ~pgLastMidi = 60;
        Synth.head(~pgGroup, ~soundNames.motion, [\out, ~pgMotion]);
        ~pgVoices = Group.tail(~pgGroup);
        Synth.tail(~pgGroup, ~soundNames.effects, [\in, ~pgAudio]);
        "Resonant Octave Mist ready".postln;
    };
};
~soundNote = { |midi=60, velocity=0.8, hold=1|
    var note = Synth.head(~pgVoices, ~soundNames.voice, [
        \out, ~pgAudio, \midi, midi, \velocity, velocity.clip(0, 1),
        \startMidi, ~pgLastMidi
    ]);
    ~pgLastMidi = midi;
    SystemClock.sched(hold, { note.set(\gate, 0); nil });
    note;
};
if(~soundOffline != true) { ~soundInstall.() };
)
```

[Read on playgrid.cc](https://playgrid.cc/tutorials/resonant-octave-mist/supercollider/)
