# Build Resonant Pulse Lead in SuperCollider

A stock-unit SuperCollider interpretation of [the Ableton sound](/tutorials/resonant-pulse-lead/) and its [Csound version](/tutorials/resonant-pulse-lead/csound/). Each stage changes the source or its effect chain; oscillator, filter, modal and room algorithms differ across platforms.

[Starting settings](STARTING_STATE.md) · [Complete settings](ALL_PARAMETERS.md). The full runnable script ends this guide.

## Step 1 — Combine the two narrow pulses

Select `~soundStage = 1` and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.

Set `~soundStage = 1` in the full script. Use two 25% pulse waves at −6 dB each, with the second two cents flat as an explicit detuning choice. Amplifier and global gains are −6 dB each. The amplitude opens over 8 ms, holds full sustain and releases over 80 ms. The independently retriggered note model omits the source last-note-priority legato and controller-driven vibrato.

| SuperCollider control | Value |
| --- | --- |
| Pulse pair | Width 0.25 each; −6 dB each; second −2 cents |
| Amplitude | 8 ms attack; full sustain; 80 ms release |
| Amplifier / instrument | −6 / −6 dB |

<audio controls preload="none" aria-label="SuperCollider Resonant Pulse Lead after step 1"><source src="audio/steps/step-01.webm" type="audio/webm"></audio>

[Sound after step 1 — WebM/Opus](audio/steps/step-01.webm)

## Step 2 — Open the dark resonant filter briefly

Set `~soundStage = 2` in the full script. Use a 220 Hz ladder lowpass with resonance 0.40 and full key tracking. A 5 ms / 143 ms / 0.48 / 143 ms exponential contour moves cutoff by 2.6 octaves. Its short brightness change occurs while the amplitude remains held, giving a pronounced articulation on detached notes.

| SuperCollider control | Value |
| --- | --- |
| Cutoff | 220 × 2^(2.6 × envelope + (note−60)/12) Hz |
| Resonance | 0.40 |
| Filter contour | 5 ms / 143 ms / 0.48 / 143 ms |

For `MoogFF`, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.

<audio controls preload="none" aria-label="SuperCollider Resonant Pulse Lead after step 2"><source src="audio/steps/step-02.webm" type="audio/webm"></audio>

[Sound after step 2 — WebM/Opus](audio/steps/step-02.webm)

## Step 3 — Round the signal with saturation

Set `~soundStage = 3` in the full script. Use +33 dB drive with 78% shaped signal and -14 dB output trim. The smooth curve is `tanh(input × 3 × drive.dbamp) / 3`; the other portion stays clean. Louder peaks enter its curved region more strongly, adding harmonics and rounding the envelope. This interprets the source saturation curve rather than implementing its proprietary transfer function.

| SuperCollider control | Value |
| --- | --- |
| Drive / output | 33 / -14 dB |
| Shaped mix | 78% |
| Input DC removal | LeakDC, coefficient 0.995 |

<audio controls preload="none" aria-label="SuperCollider Resonant Pulse Lead after step 3"><source src="audio/steps/step-03.webm" type="audio/webm"></audio>

[Sound after step 3 — WebM/Opus](audio/steps/step-03.webm)

## Step 4 — Add slow comb movement and echoes

Set `~soundStage = 4` in the full script. Sweep opposite delay taps around 1.5 ms by ±0.81 ms at 0.06 Hz. Feedback 78% strengthens the moving comb peaks; 12% wet leaves the lead in front. The explicit short-delay network interprets Phaser-Flanger, with an extra control-block latency in its feedback path. Slowly held notes reveal the sweep. Use 650 ms left and 650 ms right, 21% feedback and 7% wet. Inject the centered input on the left and cross-feed the filtered echoes so later repeats alternate sides. Filter each echo around 632.456 Hz, with a 5.96578-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per server processing block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.

| SuperCollider control | Value |
| --- | --- |
| Center / depth | 1.5 / ±0.81 ms |
| Rate / feedback / wet | 0.06 Hz / 78% / 12% |
| Times | 650 / 650 ms |
| Feedback / wet | 21% / 7% |
| Routing | Crossed, left input |
| Filter center / width | 632.456 Hz / 5.96578 octaves |
| Time LFO | 0 Hz, ±0% |

<audio controls preload="none" aria-label="SuperCollider Resonant Pulse Lead after step 4"><source src="audio/steps/step-04.webm" type="audio/webm"></audio>

[Sound after step 4 — WebM/Opus](audio/steps/step-04.webm)

## Downloads and settings

[Finished sound — WebM/Opus](audio/Resonant-Pulse-Lead.webm) · [Complete settings](ALL_PARAMETERS.md) · [Ableton version](/tutorials/resonant-pulse-lead/) · [Csound version](/tutorials/resonant-pulse-lead/csound/)

## Full SuperCollider script

The complete Resonant Pulse Lead instrument uses stock SuperCollider units. Set `~soundStage` from 1 to 4 and evaluate the entire block again to select a cumulative stage. Wait for the ready message; `~soundNote.(60, 0.8, 1)` plays MIDI 60 at velocity 0.8 with a one-second held duration. Held duration controls when release begins, while each source's decay and modulation continue independently. `~soundStop.()` frees the active instrument and its effects. This block replaces the previously installed PlayGrid instrument in the same interpreter.

```supercollider
(
~soundStage = 4;
~soundOutputScale = 2.15634;
~soundRelease = 0.143;
~soundNames = (motion: \pgResonantPulseLeadMotion, voice: \pgResonantPulseLeadVoice, effects: \pgResonantPulseLeadEffects);

~soundDefs = [
    SynthDef(\pgResonantPulseLeadMotion, { |out=0| Out.kr(out, DC.kr(0)) }),
    SynthDef(\pgResonantPulseLeadVoice, { |out=0, midi=60, velocity=0.8, gate=1, startMidi=60|
        var stage = ~soundStage;
    var aA = 0, aB = 0, aL = 0, aR = 0, aSource = 0, iHz = 0, iVelocity = 0, kAmp = 0;
    var kAmpDecay = 0, kAmpGate = 0, kCut = 0, kFilter = 0, kFilterDecay = 0, kFilterGate = 0;
    iHz = (midi).midicps;
    iVelocity = (velocity).clip(0, 1);
    aA = (Pulse.ar(iHz, 0.25) * ((0 - 6)).dbamp);
    aB = (Pulse.ar((iHz * (2 ** ((0 - 2) / 1200))), 0.25) * ((0 - 6)).dbamp);
    aSource = (aA + aB);
    if((stage >= 2)) {
    kFilterGate = EnvGen.kr(Env([0, 1, 1], [0.005, 1], \lin));
    kFilterDecay = EnvGen.kr(Env([1, 1, 0.48, 0.000001], [0.005, 0.143, 0.143], \exp, releaseNode: 2), gate);
    kFilter = (kFilterGate * kFilterDecay);
    kCut = ((220 * (2 ** ((2.6 * kFilter) + ((midi - 60) / 12))))).clip(30, 18000);
    aSource = MoogFF.ar(aSource, (kCut).clip(20, 18000), (0.40 * 4).clip(0, 3.95));
    };
    kAmpGate = EnvGen.kr(Env([0, 1, 1], [0.008, 1], \lin));
    kAmpDecay = EnvGen.kr(Env([1, 1, 1, 0.000001], [0.008, 0.08, 0.08], \exp, releaseNode: 2), gate);
    kAmp = (kAmpGate * kAmpDecay);
    aL = ((aSource * kAmp) * ((0 - 12)).dbamp);
    aR = aL;
    Out.ar(out, [aL, aR]);
        EnvGen.kr(Env.asr(0.0001, 1, 0.143), gate, doneAction: 2);
    }),
    SynthDef(\pgResonantPulseLeadEffects, { |in=0, out=0|
        var stage = ~soundStage;
        var outputScale = ~soundOutputScale;
        var input = In.ar(in, 2);
    var feedback = LocalIn.ar(4);
    var aCleanL = 0, aCleanR = 0, aDelFbL = 0, aDelFbR = 0, aDelSendL = 0, aDelSendR = 0, aDelTimeL = 0, aDelTimeR = 0;
    var aEchoL = 0, aEchoR = 0, aFlFbL = 0, aFlFbR = 0, aFlL = 0, aFlR = 0, aFlTimeL = 0, aFlTimeR = 0;
    var aL = 0, aR = 0, aShapeL = 0, aShapeR = 0, kDelCenter = 0, kDelMotion = 0, kFl = 0;
    aL = input[0];
    aR = input[1];
    if((stage >= 3)) {
    aCleanL = LeakDC.ar(aL, 0.995);
    aShapeL = ((((aCleanL * 3) * (33).dbamp)).tanh / 3);
    aL = (((aCleanL * 0.21999999999999997) + (aShapeL * 0.78)) * ((0 - 14)).dbamp);
    aCleanR = LeakDC.ar(aR, 0.995);
    aShapeR = ((((aCleanR * 3) * (33).dbamp)).tanh / 3);
    aR = (((aCleanR * 0.21999999999999997) + (aShapeR * 0.78)) * ((0 - 14)).dbamp);
    };
    if((stage >= 4)) {
    aFlFbL = feedback[0];
    aFlFbR = feedback[1];
    kFl = (SinOsc.kr(0.06, 0 * 2pi) * 1);
    aFlTimeL = K2A.ar((1.5 + (0.81 * kFl)));
    aFlTimeR = K2A.ar((1.5 - (0.81 * kFl)));
    aFlL = DelayC.ar((aL + (aFlFbL * 0.78)), 20 / 1000, (aFlTimeL / 1000).clip(0.00002, 20 / 1000));
    aFlR = DelayC.ar((aR + (aFlFbR * 0.78)), 20 / 1000, (aFlTimeR / 1000).clip(0.00002, 20 / 1000));
    aFlFbL = aFlL;
    aFlFbR = aFlR;
    aL = ((aL * 0.88) + (aFlL * 0.12));
    aR = ((aR * 0.88) + (aFlR * 0.12));
    aDelFbL = feedback[2];
    aDelFbR = feedback[3];
    kDelMotion = 0;
    aDelTimeL = K2A.ar((650.0 * (1 + (0 * kDelMotion))));
    aDelTimeR = K2A.ar((650.0 * (1 - (0 * kDelMotion))));
    aDelSendL = ((aL + aR) * 0.5);
    aDelSendR = 0;
    aEchoL = DelayC.ar((aDelSendL + (aDelFbR * 0.21)), 2200 / 1000, (aDelTimeL / 1000).clip(0.00002, 2200 / 1000));
    aEchoR = DelayC.ar((aDelSendR + (aDelFbL * 0.21)), 2200 / 1000, (aDelTimeR / 1000).clip(0.00002, 2200 / 1000));
    kDelCenter = (632.4555320336759 * (2 ** (0 * kDelMotion)));
    aEchoL = HPF.ar(aEchoL, ((kDelCenter / (2 ** 2.9828921423310435))).clip(20, 18000));
    aEchoL = LPF.ar(aEchoL, ((18000).min((kDelCenter * (2 ** 2.9828921423310435)))).clip(20, 18000));
    aEchoR = HPF.ar(aEchoR, ((kDelCenter / (2 ** 2.9828921423310435))).clip(20, 18000));
    aEchoR = LPF.ar(aEchoR, ((18000).min((kDelCenter * (2 ** 2.9828921423310435)))).clip(20, 18000));
    aDelFbL = aEchoL;
    aDelFbR = aEchoR;
    aL = ((aL * 0.9299999999999999) + (aEchoL * 0.07));
    aR = ((aR * 0.9299999999999999) + (aEchoR * 0.07));
    };
    LocalOut.ar([aFlFbL, aFlFbR, aDelFbL, aDelFbR].collect { |channel| channel + DC.ar(0) });
    Out.ar(out, [((aL * 1) * outputScale), ((aR * 1) * outputScale)]);
    })
];
~soundStop = {
    if(~cirrusGroup.notNil) { ~cirrusGroup.free; ~cirrusGroup = nil };
    if(~cirrusAudio.notNil) { ~cirrusAudio.free; ~cirrusAudio = nil };
    if(~cirrusMotion.notNil) { ~cirrusMotion.free; ~cirrusMotion = nil };
    if(~pgGroup.notNil) { ~pgGroup.free; ~pgGroup = nil };
    if(~pgAudio.notNil) { ~pgAudio.free; ~pgAudio = nil };
    if(~pgMotion.notNil) { ~pgMotion.free; ~pgMotion = nil };
};
~soundInstall = {
    s.waitForBoot {
        ~soundStop.();
        ~soundDefs.do { |definition| definition.add };
        s.sync;
        ~pgAudio = Bus.audio(s, 2);
        ~pgMotion = Bus.control(s, 1);
        ~pgGroup = Group.head(s);
        ~pgLastMidi = 60;
        Synth.head(~pgGroup, ~soundNames.motion, [\out, ~pgMotion]);
        ~pgVoices = Group.tail(~pgGroup);
        Synth.tail(~pgGroup, ~soundNames.effects, [\in, ~pgAudio]);
        "Resonant Pulse Lead ready".postln;
    };
};
~soundNote = { |midi=60, velocity=0.8, hold=1|
    var note = Synth.head(~pgVoices, ~soundNames.voice, [
        \out, ~pgAudio, \midi, midi, \velocity, velocity.clip(0, 1),
        \startMidi, ~pgLastMidi
    ]);
    ~pgLastMidi = midi;
    SystemClock.sched(hold, { note.set(\gate, 0); nil });
    note;
};
if(~soundOffline != true) { ~soundInstall.() };
)
```

[Read on playgrid.cc](https://playgrid.cc/tutorials/resonant-pulse-lead/supercollider/)
