# Slate Cove — complete Csound settings

## Note and effect connections

Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Its left and right outputs accumulate on shared buses. Instrument 90 processes the buses once per control block, clears the inputs and keeps effect memories active through the tails. Envelopes with release segments extend the note automatically. The score is an audible pitch-and-touch example; the synthesis controls are independent of its particular notes.

## Csound interpretation

These are explicit Csound models, not identical implementations of the Ableton devices. Wavetable positions, proprietary oscillator engines, physical-model macros, filter circuits, envelope slopes and effect algorithms can differ. Modulation depths are specified in octaves, cents or milliseconds rather than treated as universally interchangeable matrix values. Controller inputs such as pitch bend, modulation wheel, pressure and per-note expression are not mapped. Independent score notes do not implement Live's monophonic note-priority or legato system. Any pitch memory or drift included in this instrument is described in its steps.



## Signal path and controls

### Stage 1 — Build the detuned source and amplitude contour

Use 3 band-limited saw voices at -13 dB each, spread by 7.2 cents between adjacent voices. Reverse the stereo weights across the channels. The amplitude opens in 0.66 seconds, decays over 2.01 seconds to 0.794328, and releases over 1.87 seconds. Basic Shapes is represented by this explicit waveform; Shimmer, where present, becomes slow independent pitch drift rather than the original unison engine.

| Csound control | Value |
| --- | --- |
| Sources | 3 × saw, -13 dB |
| Adjacent pitch spacing | 7.2 cents |
| Amp A/D/S/R | 0.66 s / 2.01 s / 0.794328 / 1.87 s |
| Instrument gain | -8 dB |
| Velocity multiplier | 0.4 + 0.6 × velocity |

### Stage 2 — Blend the second source and animate the filters

Add a pulse layer at -16 dB, 0 semitones and 5 cents. The bandpass center starts from 839 Hz and moves by 0.8 octaves under the second envelope. A positive depth opens the spectral ceiling; a negative depth moves the notch downward. The serial second filter keeps the specified high or low edge under control. Exact wavetable morphing, Warp/Fold and free-running source modulation are not implemented; the code below defines the chosen static spectra and note-local drift.

| Csound control | Value |
| --- | --- |
| Secondary layer | pulse, -16 dB; 0 st; 5 cents |
| Filter 1 | Bandpass, 839 Hz base, 0.8 octave depth |
| Filter contour | 1.8 / 3 / 0.6 / 2.4 |
| Filter 2 | Lowpass at 6.20 kHz |
| Pulse width | 0.56 |

### Stage 3 — Add moving stereo chorus

Move two delay taps around 20 ms by ±3.6 ms at 0.3 Hz, with opposite phases and 22% wet mix. Highpass only the wet inputs at 220 Hz to leave the direct low body clear. Scale side information by 1.05; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.

| Csound control | Value |
| --- | --- |
| Tap center / excursion | 20 / ±3.6 ms |
| Rate / wet | 0.3 Hz / 22% |
| Wet highpass | 220 Hz |
| Width / feedback | 1.05 / 0 |
| Warmth shaping | 0% smooth-drive interpretation |

### Stage 4 — Surround the tone with a damped room

Feed the preceding signal through 28 ms predelay into `reverbsc`, with feedback 0.8219, 3300 Hz damping and 25% wet mix. Predelay leaves the initial articulation in front; feedback prolongs the tail, while damping darkens repeated circulation. The source room decay setting is 3.57 seconds, but Csound feedback is not a decay-time control: this is an interpretation of that space, with different diffusion and modulation. 

| Csound control | Value |
| --- | --- |
| Source decay target | 3.57 s (not a measured Csound decay) |
| Predelay / feedback | 28 ms / 0.8219 |
| Damping / wet | 3300 Hz / 25% |
| Room side multiplier | 1 |
| Room input cuts | Off |

### Stage 5 — Set the final width and gain

Use 9.08 dB gain after the effects. Scale the side signal by 1, preserving the center. Highpass only the side at 180 Hz to focus the lowest frequencies. Apply order-2048 DC removal, using a longer window to limit low-note loss. The fixed output-scale control at the end of instrument 90 remains a separate Csound gain setting. Clear the shared note buses only after processing them; effect memories continue carrying their own tails.

| Csound control | Value |
| --- | --- |
| Final gain | 9.08 dB |
| Width | 1 × side |
| Bass side cutoff | 180 Hz |
| DC removal | Order 2048 |

## Output and signal rates

The script uses 48000 Hz, 16-sample control blocks and stereo output. The fixed output-scale control is `1.184062` and follows the whole chain at every stage, separate from any final gain step. DC-removal blocks, where enabled, use order 2048 to limit low-note attenuation; they add processing delay.

[Build guide and full script](BUILD_GUIDE.md#full-csound-script) · [Starting settings](STARTING_STATE.md)

[Read on playgrid.cc](https://playgrid.cc/tutorials/slate-cove/csound/settings/)
