# Submerged Pulse Horn — Csound starting settings

## First-stage source

Set `giStage init 1`. Use a 10% pulse at −8 dB and a quiet upper sine at +16 st/−14 cents, −21 dB. A mild tanh shape interprets the upper source warp. Bandpass the main pair at 400 Hz and notch near 805 Hz, while allowing the octave-down sine to bypass those filters and preserve the low anchor. That explicit sub bypass is a Csound interpretation of the source balance. Use a 24 ms opening, full sustain and 3.3 s release.

| Csound control | Value |
| --- | --- |
| Main / upper | Pulse width 0.10 at −8 dB; sine +16 st/−14 cents at −21 dB |
| Sub | Octave-down sine, 0 dB, bypasses main filters |
| Filters | 400 Hz bandpass, bandwidth = center; 805 Hz notch, bandwidth = 15% center |
| Tracking | Bandpass 70%; notch 100% |
| Amplitude | 24 ms / 1.28 s / full / 3.3 s |
| Touch | 0.2 + 0.8 × velocity |

Later stages are bypassed until selected. Start from the complete script so declarations and shared buses are connected. The fixed output scale is 0.3749665; note inputs and any interpretation limits are described in the [complete settings](ALL_PARAMETERS.md).

[Build guide](BUILD_GUIDE.md)

[Read on playgrid.cc](https://playgrid.cc/tutorials/submerged-pulse-horn/csound/starting-state/)
