# Submerged Pulse Horn — SuperCollider starting settings

## First-stage source

Select `~soundStage = 1` and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.

Set `~soundStage = 1` in the full script. Use a 10% pulse at −8 dB and a quiet upper sine at +16 st/−14 cents, −21 dB. A mild tanh shape interprets the upper source warp. Bandpass the main pair at 400 Hz and notch near 805 Hz, while allowing the octave-down sine to bypass those filters and preserve the low anchor. That explicit sub bypass is a SuperCollider interpretation of the source balance. Use a 24 ms opening, full sustain and 3.3 s release.

| SuperCollider control | Value |
| --- | --- |
| Main / upper | Pulse width 0.10 at −8 dB; sine +16 st/−14 cents at −21 dB |
| Sub | Octave-down sine, 0 dB, bypasses main filters |
| Filters | 400 Hz bandpass, bandwidth = center; 805 Hz notch, bandwidth = 15% center |
| Tracking | Bandpass 70%; notch 100% |
| Amplitude | 24 ms / 1.28 s / full / 3.3 s |
| Touch | 0.2 + 0.8 × velocity |

## Later sound shaping

- Stage 2: Let the bandpass rise after the attack.
- Stage 3: Round the signal with saturation.
- Stage 4: Widen a dark room around the horn.

The fixed output multiplier `~soundOutputScale` is 0.4362782. The connected [full script](/tutorials/submerged-pulse-horn/supercollider/#full-supercollider-script) supplies all declarations and shared effects. [Complete settings](ALL_PARAMETERS.md) describe the SuperCollider-specific algorithms and their differences.

[Read on playgrid.cc](https://playgrid.cc/tutorials/submerged-pulse-horn/supercollider/starting-state/)
