Ash Ember — Complete device settings
Ash Ember is a pad sound made with Wavetable, Chorus-Ensemble, Reverb and Utility.
Signal flow: Wavetable → Chorus-Ensemble → Reverb → Utility.
Controls retain the labels and units shown by the devices. A control in a switched-off section remains inactive until that section is enabled.
Wavetable #
| Control | Value |
|---|---|
| Device On | On |
| Osc 1 On | On |
| Osc 1 Transp | 0 st |
| Osc 1 Detune | 0 ct |
| Osc 1 Pos | 34 % |
| Osc 1 Effect 1 | 0.0 % |
| Osc 1 Effect 2 | 12 % |
| Osc 1 Pan | C |
| Osc 1 Gain | -10 dB |
| Osc 2 On | On |
| Osc 2 Transp | 7 st |
| Osc 2 Detune | 0 ct |
| Osc 2 Pos | 43 % |
| Osc 2 Effect 1 | 0.0 % |
| Osc 2 Effect 2 | 0.0 % |
| Osc 2 Pan | C |
| Osc 2 Gain | -20 dB |
| Sub On | On |
| Sub Tone | 0.0 % |
| Sub Gain | -20 dB |
| Sub Transpose | -1 |
| Flt 1 On | On |
| Flt 1 Type | Lowpass |
| Flt 1 LP/HP | Clean |
| Flt 1 BP/NO/MO | Clean |
| Flt 1 Slope | 12 |
| Flt 1 Freq | 1.49 kHz |
| Flt 1 Res | 12 % |
| Flt 1 Drive | 0.00 dB |
| Flt 1 Morph | 0 lp/bp |
| Flt 2 On | On |
| Flt 2 Type | Highpass |
| Flt 2 LP/HP | Clean |
| Flt 2 BP/NO/MO | Clean |
| Flt 2 Slope | 12 |
| Flt 2 Freq | 95.0 Hz |
| Flt 2 Res | 0.0 % |
| Flt 2 Drive | 0.00 dB |
| Flt 2 Morph | 0 lp/bp |
| Amp Attack | 1.32 s |
| Amp Decay | 2.17 s |
| Amp Release | 2.98 s |
| Amp A Slope | 0.0 % |
| Amp D Slope | 50 % |
| Amp R Slope | 50 % |
| Amp Sustain | -2.0 dB |
| Amp Loop Mode | None |
| Env 2 Attack | 2.20 s |
| Env 2 Decay | 3.30 s |
| Env 2 Release | 3.50 s |
| Env 2 A Slope | 0.0 % |
| Env 2 D Slope | 50 % |
| Env 2 R Slope | 50 % |
| Env 2 Initial | 0.0 % |
| Env 2 Peak | 100 % |
| Env 2 Sustain | 65 % |
| Env 2 Final | 0.0 % |
| Env 2 Loop Mode | None |
| Env 3 Attack | 1.00 ms |
| Env 3 Decay | 600 ms |
| Env 3 Release | 600 ms |
| Env 3 A Slope | 0.0 % |
| Env 3 D Slope | 50 % |
| Env 3 R Slope | 50 % |
| Env 3 Initial | 0.0 % |
| Env 3 Peak | 100 % |
| Env 3 Sustain | 50 % |
| Env 3 Final | 0.0 % |
| Env 3 Loop Mode | None |
| LFO 1 Retrigger | Off |
| LFO 1 Shape | Sine |
| LFO 1 Amount | 100 % |
| LFO 1 Shaping | 0.0 % |
| LFO 1 Phase Offset | 0.0° |
| LFO 1 Sync | Free |
| LFO 1 Rate | 0.11 Hz |
| LFO 1 S. Rate | 1/8 |
| LFO 1 Attack Time | 0.00 ms |
| LFO 2 Retrigger | Off |
| LFO 2 Shape | Sine |
| LFO 2 Amount | 100 % |
| LFO 2 Shaping | 0.0 % |
| LFO 2 Phase Offset | 0.0° |
| LFO 2 Sync | Free |
| LFO 2 Rate | 0.17 Hz |
| LFO 2 S. Rate | 1/8 |
| LFO 2 Attack Time | 0.00 ms |
| Time | 0.0 % |
| Global Mod Amount | 100 % |
| Unison Amount | 18 % |
| Transpose | 0 st |
| Glide | 0.00 ms |
| Volume | -9.0 dB |
Voicing and modulation #
Choose the waveform and voicing controls below. In the Matrix and MIDI tabs, set the listed routes; leave unlisted routes at zero. The modulation amounts are the values shown in the matrix. Poly voices apply in Poly mode.
| Control | Value |
|---|---|
| Oscillator 1 category | Basics |
| Oscillator 1 wavetable | Basic Shapes |
| Oscillator 1 effect mode | Modern |
| Oscillator 2 category | Basics |
| Oscillator 2 wavetable | Basic Shapes |
| Oscillator 2 effect mode | None |
| Voicing | Poly |
| Poly voices | 8 |
| Unison mode | Shimmer |
| Unison voices | 3 |
| Filter routing | Serial |
| Velocity → Volume | 60 |
| Pitch Bend → Transpose | 2 st |
| Env 2 → Flt 1 Freq | 18 |
| LFO 2 → Flt 1 Freq | 3.5 |
| Mod Wheel → Flt 1 Freq | 10 |
| LFO 1 → Osc 1 Effect 2 | 4 |
Chorus-Ensemble #
| Control | Value |
|---|---|
| Device On | On |
| Mode | Ensemble |
| Shape | 0.0 % |
| Rate | 0.21 Hz |
| Amount | 23 % |
| Feedback | 0.0 % |
| FB Invert | Off |
| Offset | 0.0° |
| Delay Time | 20 ms |
| Delay Taps | 2 |
| HP On | On |
| HP Freq | 200 Hz |
| Width | 110 % |
| Warmth | 12 % |
| Output | 0.0 dB |
| Dry/Wet | 24 % |
Reverb #
| Control | Value |
|---|---|
| Device On | On |
| Predelay | 25.0 ms |
| In Lo Cut On | Off |
| In Hi Cut On | Off |
| Input Freq | 830 Hz |
| Input Width | 5.85 |
| ER Spin On | On |
| ER Spin Rate | 0.30 Hz |
| ER Spin Amount | 17.50 |
| ER Shape | 0.50 |
| Diff. Hi On | On |
| Diff. Hi Type | Shelf |
| Diff. Hi Freq | 3.30 kHz |
| HiShelf Gain | 0.60 |
| Diff. Lo On | Off |
| Diff. Lo Freq | 90.0 Hz |
| LowShelf Gain | 0.75 |
| Chorus On | On |
| Chorus Rate | 0.02 Hz |
| Chorus Amount | 0.02 |
| Decay Time | 4.20 s |
| Diffusion | 60 % |
| Scale | 40 % |
| Freeze On | Off |
| Flat On | On |
| Cut On | On |
| Room Size | 90.00 |
| Size Smoothing | Fast |
| Stereo Image | 100.00 |
| Density | High |
| Reflect Level | 0.0 dB |
| Diffuse Level | 0.0 dB |
| Dry/Wet | 28 % |
Utility #
| Control | Value |
|---|---|
| Device On | On |
| Left Inv | Off |
| Right Inv | Off |
| Channel Mode | Stereo |
| Stereo Width | 105 % |
| Mono | Off |
| Bass Mono | On |
| Bass Freq | 180 Hz |
| Balance | C |
| Output | 3.59 dB |
| Mute | Off |
| DC Filter | On |