Cinder Orbit — complete Csound settings
Signal flow and interpretation #
Drifting triangle cluster + slower octave sine → separate lowpass filters and amplitude envelopes → mild drive → filtered cross-feedback delay → hall → bass narrowing, output gain and DC removal.
This version interprets the Ableton Meld sound. The triangle cluster approximates Swarm Triangle's evolving character without implementing its internal algorithm. Drift and spacing are explicit pitch values rather than direct conversions of Motion and Spacing. The sine octave layer interprets Basic Shapes at its lowest shape setting. Filter Q, envelope slopes, drive, spread, delay modulation and hall feedback use Csound choices; they do not numerically reproduce the original macros or proprietary effects. Scale-aware tuning, pitch-bend and per-note expression mappings are not implemented.
Engine A — drifting triangle cluster #
| Control | Value |
|---|---|
| Signal engine | Csound 6 syntax; 48000 Hz; 16-sample control blocks; stereo |
| Finished stage | giStage = 5 |
| Source | Five band-limited triangle oscillators, vco2 mode 12 |
| Fixed voice offsets | −29.4, −14.7, 0, +14.7, +29.4 cents |
| Initial phases | 0.05, 0.23, 0.41, 0.62, 0.84 cycles |
| Pitch drift | ±1.2 cents; sine LFO rate 0.12 + abs(voice cents) × 0.005 Hz |
| Additional engine offset | 0 cents at stage 1; −3.125 cents from stage 2 |
| A envelope | Linear 771 ms attack, 2.41 s decay to −4 dB, 2.17 s release to zero |
| A gain | −10 dB |
| Dry cluster mix at stage 1 | Sum of voices / 5, centered |
| Left voice weights from stage 2 | 0.8, 0.7, 0.5, 0.3, 0.2; sum / 2.5 |
| Right voice weights from stage 2 | Reversed left weights; sum / 2.5 |
| A filter from stage 2 | lowpass2 at 1660 Hz, Q 1.2, both channels |
| A right-channel bias | × 0.85 after filtering |
The opposing voice weights create a stereo difference from slightly different pitches rather than a copy with a fixed delay. The right-channel trim biases the main engine slightly left. Q 1.2 is the explicit Csound resonance setting; the original Meld Q value 12.0 is a different control scale.
Engine B — slower octave bloom #
| Control | Value |
|---|---|
| Source | Sine, initial phase 0.17 cycles |
| Pitch | One octave above the note, +3.125 cents |
| B envelope | Linear 1.10 s attack, 4.00 s decay to −6 dB, 2.20 s release to zero |
| B gain | −22 dB |
| Filter | Butterworth lowpass at 3600 Hz |
| Stereo position | pan2 at 0.625, slightly right |
| Velocity | Same multiplier as A: 0.5 + 0.5 × velocity |
| Instrument drive / gain | tanh(engine sum × 1.1) / 1.1; then −8 dB |
A and B have independent envelope instances. Their overlapping release times extend each note automatically; from stage 2 onward, the longer B release determines the final voice lifetime. At stage 1 only A is active. The B lowpass preserves the source signal path even though a sine contains no upper partials to cut at ordinary pitches.
Filtered stereo delay #
| Control | Value | Audible role |
|---|---|---|
| Left / right center times | 340 / 470 ms | Unequal stereo echoes |
| Shared sine LFO | 0.18 Hz | Slow echo movement across notes |
| Time depth | ±2% on left, reversed on right | Gentle pitch movement in repeats |
| Time interpolation | k-rate target smoothed to audio rate | Avoids stepped delay changes |
| Feedback | 30%, crossed between channels | Alternating stereo paths |
| Filter center | 1700 × 2^(0.04 × LFO) Hz | Slight moving color |
| Feedback highpass | Center / 2^1.5 | Removes lows on each trip |
| Feedback lowpass | Center × 2^1.5 | Softens upper repeats |
| Passband interpretation | Three octaves between cutoff values | Explicit Csound choice for Width |
| Delay mix | 78% dry + 22% filtered echo | Retains the direct swell |
| Delay buffer | 1000 ms maximum | Contains both modulation ranges |
Filtered delay outputs feed the opposite channel on the next control block. The extra 16-sample feedback latency is part of this implementation. Both feedback gains stay below unity, and input energy is filtered on every repeat.
Hall and output #
| Control | Value | Audible role |
|---|---|---|
| Hall predelay | 30 ms | Separates swells and diffuse room |
| reverbsc feedback | 0.84 | Sustained hall-like tail |
| Feedback damping | 3200 Hz | Darkens recirculating highs |
| Hall mix | 80% delay mix + 20% hall | Surrounds the echoes |
| Bass narrowing | Side-channel highpass at 160 Hz | Reduces low stereo spread |
| Output gain | +9.61 dB | Raises the finished body and tails |
| DC removal | Both reconstructed output channels | Removes constant offset |
Reverb feedback is not a decay time in seconds. Room size, diffusion, high-shelf gain and envelope slopes have no direct one-to-one translation in this script.
Stage selector and complete script #
giStage is cumulative: 1 gives the centered cluster; 2 adds the octave, filters and stereo placement; 3 adds delay; 4 adds hall; 5 adds bass narrowing and output gain. Instrument 90 carries the shared effects across notes and clears the input buses after each block.
The full Csound script appears at the end of the build guide.
Opcode references #
lowpass2 provides a resonant second-order lowpass. vdelay3 uses delay times in milliseconds. reverbsc provides the hall with separate feedback and damping controls.
Starting settings · Build guide
DC-blocking window #
Final DC removal uses dcblock2 with order 2048. The longer window limits low-note attenuation compared with its default order of 128, while adding processing delay.