Cirrus Window — complete SuperCollider settings
Signal flow: shared pulse-width motion → three stereo-weighted saw/pulse voices → amplitude and serial bandpass/lowpass → stereo audio bus → three-tap ensemble → stereo room → bass-side filtering and DC removal → output gain.
Oscillators and envelopes #
| Control | Value and audible role |
|---|---|
| Saw / pulse levels | −13 / −16 dB per voice |
| Voice detune | −7 / 0 / +7 cents, for sustained beating |
| Pulse detune | Additional +5 cents relative to its saw |
| Pitch drift | ±2.2 cents at 0.17 + absolute voice cents × 0.008 Hz |
| Drift phase | 0.08 / 0.41 / 0.73 cycles, converted to radians |
| Pulse-width motion | Shared 0.09 Hz sine, width 0.29 ± 0.025 |
| Stereo voice weights | L: 0.87 / 0.5 / 0.13; R reversed; sums divided by 1.5 |
| Amplitude envelope | Levels 0 → 1 → −2 dB → 0; times 0.85 / 2.5 / 2.4 s; sustain at the third level until gate release |
| Envelope shaping | Power 1.6; effective sustain −3.2 dB |
| Voice gain | −8 dB × 0.65 × amplitude envelope |
| Velocity sensitivity | Gain multiplier 0.55 + 0.45 × clipped velocity |
| Filter envelope | Levels 0 → 1 → 0.6 → 0; times 1.8 / 3 / 2.4 s, with gate-controlled release |
Serial filters #
| Control | Value and audible role |
|---|---|
| Bandpass | BPF, base center 850 Hz, reciprocal Q 1 / 0.85 |
| Envelope depth | +0.8 octaves at peak |
| Key tracking | +0.15 cutoff octaves per played octave, relative to MIDI 60 |
| Lowpass | LPF, 6200 Hz, following the bandpass |
BPF uses bandwidth divided by center frequency as its reciprocal-Q argument. The broad setting focuses the midrange without a narrow resonant peak. Its response and the oscillator spectra differ from both Wavetable's filters and Csound's implementation.
Ensemble #
| Control | Value and audible role |
|---|---|
| Input highpass | HPF, 220 Hz |
| Delay units | Three DelayC taps, 40 ms maximum allocation |
| Center / depth | 20 ms / ±3.6 ms |
| Rate / phase | 0.24 Hz; 0, 2π/3, 4π/3 radians |
| Tap inputs | Left, stereo mean, right |
| Wet channel weights | 75% outer tap + 25% center tap |
| Dry / wet | 78% / 22% |
| Side gain | 1.05 after the ensemble blend |
Stereo room #
| Control | Value and audible role |
|---|---|
| Predelay | DelayN, 28 ms, on the room input only |
| Reverb | Stock FreeVerb2, two inputs and two outputs |
| Internal mix | 1, wet output only |
| Room / damping | 0.84 / 0.55 |
| External dry / wet | 75% unpredelayed ensemble / 25% room |
FreeVerb2 replaces the room algorithm; it does not implement Ableton's room or Csound's reverbsc. Its room and damping values are dimensionless, without a direct conversion to seconds or a cutoff in hertz. The wet blend and predelay preserve the same broad sound-shaping intent.
Output and voice behavior #
| Control | Value and audible role |
|---|---|
| Bass-side filtering | HPF at 180 Hz on the side channel only |
| DC removal | LeakDC, default coefficient 0.995 |
| Finishing gain | +10.9 dB, stage 5 only |
| Fixed gain | 0.5 after the stage selector, all stages |
| Stage selector | ~soundStage = 5, range 1–5; evaluate the block again to replace the active instrument |
| Note arguments | ~soundNote.(midi, velocity, hold); defaults 60, 0.79, 2.5 s |
| Release behavior | Gate closure releases amplitude and filter contours; the voice frees after its amplitude release |
| Processor order | Shared motion Synth → voice group → shared effects Synth |
Saw and Pulse have their own startup phases and band-limiting behavior; the phase settings above apply to pitch drift, not oscillator resets. The source wavetable morph and Shimmer are interpreted as a saw/pulse blend with slow pitch drift. No external sample, plugin or SynthDef is required. The connected full SuperCollider script ends the build guide.
Unit references #
SuperCollider BPF explains reciprocal Q. SuperCollider FreeVerb2 documents the room and damping controls.