Clover Orbit — Complete device settings
Clover Orbit is a keyboard sound made with Drift, Chorus-Ensemble, Reverb and Utility.
Signal flow: Drift → Chorus-Ensemble → Reverb → Utility.
Controls retain the labels and units shown by the devices. A control in a switched-off section remains inactive until that section is enabled.
Drift #
| Control | Value |
|---|---|
| Device On | On |
| LP Freq | 833 Hz |
| LP Res | 0.30 |
| LP Type | I |
| HP Freq | 80.0 Hz |
| Key > LPF | 0.70 |
| LP Mod Amt 1 | 40 % |
| LP Mod Amt 2 | 12 % |
| Osc 1 Flt On | On |
| Osc 2 Flt On | On |
| Noise Flt On | On |
| LFO Time Mode | Freq |
| LFO Rate | 0.40 Hz |
| LFO Ratio | 1.00 |
| LFO Time | 1.00 s |
| LFO Synced | 1/8 |
| LFO Amt | 100 % |
| LFO Wave | Sine |
| LFO Mod Amt | 0.0 % |
| LFO Retrig On | Off |
| Osc 1 Wave | Triangle |
| Osc 1 Shape | 0.00 |
| Osc 1 Oct | 0 |
| Osc 1 Shape Mod Amt | 0.0 % |
| Osc 2 Wave | Sine |
| Osc 2 Detune | 0.00 |
| Osc 2 Oct | 1 |
| Pitch Mod Amt 1 | 0.0 % |
| Pitch Mod Amt 2 | 0.0 % |
| Osc 1 Gain | -5.0 dB |
| Osc 2 Gain | -20 dB |
| Osc 1 On | On |
| Osc 2 On | On |
| Noise Gain | -inf dB |
| Noise On | Off |
| Env 1 Attack | 3.80 ms |
| Env 1 Decay | 2.18 s |
| Env 1 Release | 590 ms |
| Env 1 Sustain | 12 % |
| Env 2 Attack | 1.00 ms |
| Env 2 Decay | 380 ms |
| Env 2 Release | 300 ms |
| Env 2 Sustain | 0.0 % |
| Cyc Env Time Mode | Freq |
| Cyc Env Rate | 5.00 Hz |
| Cyc Env Ratio | 1.00 |
| Cyc Env Time | 1.00 s |
| Cyc Env Synced | 1/8 |
| Cyc Env Tilt | 0.50 |
| Cyc Env Hold | 0.00 |
| Mod Matrix Amt 1 | 0.0 % |
| Mod Matrix Amt 2 | 0.0 % |
| Mod Matrix Amt 3 | 0.0 % |
| Vel > Vol | 55 % |
| Osc Retrig On | Off |
| Env 2 Cyc On | Env |
| Poly Voice Depth | 0.0 % |
| Spread | 12 % |
| Strength | 5.0 % |
| Thickness | 0.0 % |
| Drift | 4.0 % |
| Legato On | Off |
| Note Pitch Bend On | On |
| Glide Time | 0.00 ms |
| Volume | -6.0 dB |
| Transpose | 0 st |
Voicing and modulation #
Set the voice options and modulation source/destination menus below. Their amounts appear in the Drift parameter table. A source has no effect when its amount is zero or its destination is None.
| Control | Value |
|---|---|
| Filter modulation source 1 | Env 2 |
| Filter modulation source 2 | Vel |
| LFO modulation source | Mod |
| Pitch modulation source 1 | Env 2 |
| Pitch modulation source 2 | LFO |
| Shape modulation source | Slide |
| Modulation row 1 source | Mod |
| Modulation row 2 source | Vel |
| Modulation row 3 source | Press |
| Modulation row 1 destination | LP Frequency |
| Modulation row 2 destination | None |
| Modulation row 3 destination | None |
| Voice count | 8 |
| Voice mode | Poly |
Chorus-Ensemble #
| Control | Value |
|---|---|
| Device On | On |
| Mode | Chorus |
| Shape | 0.0 % |
| Rate | 0.39 Hz |
| Amount | 12 % |
| Feedback | 0.0 % |
| FB Invert | Off |
| Offset | 0.0° |
| Delay Time | 20 ms |
| Delay Taps | 2 |
| HP On | On |
| HP Freq | 160 Hz |
| Width | 100 % |
| Warmth | 0.0 % |
| Output | 0.0 dB |
| Dry/Wet | 18 % |
Reverb #
| Control | Value |
|---|---|
| Device On | On |
| Predelay | 12.0 ms |
| In Lo Cut On | Off |
| In Hi Cut On | Off |
| Input Freq | 830 Hz |
| Input Width | 5.85 |
| ER Spin On | On |
| ER Spin Rate | 0.30 Hz |
| ER Spin Amount | 17.50 |
| ER Shape | 0.50 |
| Diff. Hi On | On |
| Diff. Hi Type | Shelf |
| Diff. Hi Freq | 4.50 kHz |
| HiShelf Gain | 0.60 |
| Diff. Lo On | Off |
| Diff. Lo Freq | 90.0 Hz |
| LowShelf Gain | 0.75 |
| Chorus On | On |
| Chorus Rate | 0.02 Hz |
| Chorus Amount | 0.02 |
| Decay Time | 1.77 s |
| Diffusion | 60 % |
| Scale | 40 % |
| Freeze On | Off |
| Flat On | On |
| Cut On | On |
| Room Size | 55.00 |
| Size Smoothing | Fast |
| Stereo Image | 100.00 |
| Density | High |
| Reflect Level | 0.0 dB |
| Diffuse Level | 0.0 dB |
| Dry/Wet | 17 % |
Utility #
| Control | Value |
|---|---|
| Device On | On |
| Left Inv | Off |
| Right Inv | Off |
| Channel Mode | Stereo |
| Stereo Width | 100 % |
| Mono | Off |
| Bass Mono | Off |
| Bass Freq | 120 Hz |
| Balance | C |
| Output | -1.82 dB |
| Mute | Off |
| DC Filter | On |