Detuned Room Pad starting settings
Apply these Operator settings for step 1 in Live 12 Suite. Algorithm 11 connects the oscillators independently to the output. Enable A, B and C, choose Saw D for each, and disable D. Leave the filter Off until step 2. Add Chorus-Ensemble in step 3 and Reverb in step 4.
All three active oscillators use Coarse 1. Set Fine to 0 / 1 / 8 and displayed Level to −6.0 / −10 / −6.7 dB for A / B / C. Fine uses Operator's frequency-ratio units. Keep Fixed and oscillator Retrigger Off, phase and feedback zero, and oscillator frequency quantization On. Set oscillator level velocity/key tracking and frequency velocity tracking to zero.
Use the same amplitude envelope for A, B and C: Attack 885 ms, Decay 1.21 s, Sustain and Peak 0 dB, Initial and End −∞ dB, and Release 3.00 s. Set Attack Slope 0%, Decay and Release Slopes 100%, Loop None and envelope velocity-time controls zero.
Set Voices 6, global Retrigger Off, Interpolation and Antialiasing On, Transpose 0 st, Tone 100%, Volume −9.0 dB and Spread 0%. Keep Glide, Pitch Envelope and LFO Off. Center pan and set pan modulation, Time and Time < Key to zero. Pitch-bend range is 2 semitones; other global controller destinations remain Off.
Operator parameters #
Inactive controls are included for completeness. Filter settings below take effect when the filter is enabled in step 2.
| Parameter | Displayed value |
|---|---|
| Device On | On |
| Algorithm | Alg. 11 |
| Transpose | 0 st |
| PB Range | +2 st |
| Volume | -9.0 dB |
| Panorama | C |
| Pan < Key | 0 |
| Pan < Rnd | 0 |
| Tone | 100 % |
| Spread | 0 % |
| Glide On | Off |
| Glide Time | 50.0 ms |
| Osc-A On | On |
| A Coarse | 1 |
| A Fine | 0 |
| A Freq<Vel | 0 |
| A Quantize | On |
| A Fix On | Off |
| A Fix Freq | 100 Hz |
| A Fix Freq Mul | 1 |
| Osc-A Level | -6.0 dB |
| Osc-A Retrig | Off |
| Osc-A Phase | 0 % |
| Osc-A Lev < Vel | 0 % |
| Osc-A Lev < Key | 0 % |
| Osc-A Wave | Saw D |
| Osc-A Feedb | 0 % |
| Osc-A < Pe | On |
| Osc-A < LFO | On |
| Ae Attack | 885 ms |
| Ae Init | −∞ dB |
| Ae Decay | 1.21 s |
| Ae Peak | 0.0 dB |
| Ae Sustain | 0.0 dB |
| Ae Release | 3.00 s |
| Ae Mode | None |
| Ae Loop | 100 ms |
| Ae Retrig | 1/16 |
| Ae R < Vel | 0 % |
| Osc-B On | On |
| B Coarse | 1 |
| B Fine | 1 |
| B Freq<Vel | 0 |
| B Quantize | On |
| B Fix On | Off |
| B Fix Freq | 100 Hz |
| B Fix Freq Mul | 1 |
| Osc-B Level | -10 dB |
| Osc-B Retrig | Off |
| Osc-B Phase | 0 % |
| Osc-B Lev < Vel | 0 % |
| Osc-B Lev < Key | 0 % |
| Osc-B Wave | Saw D |
| Osc-B Feedb | 0 % |
| Osc-B < Pe | On |
| Osc-B < LFO | On |
| Be Attack | 885 ms |
| Be Init | −∞ dB |
| Be Decay | 1.21 s |
| Be Peak | 0.0 dB |
| Be Sustain | 0.0 dB |
| Be Release | 3.00 s |
| Be Mode | None |
| Be Loop | 100 ms |
| Be Retrig | 1/16 |
| Be R < Vel | 0 % |
| Osc-C On | On |
| C Coarse | 1 |
| C Fine | 8 |
| C Freq<Vel | 0 |
| C Quantize | On |
| C Fix On | Off |
| C Fix Freq | 100 Hz |
| C Fix Freq Mul | 1 |
| Osc-C Level | -6.7 dB |
| Osc-C Retrig | Off |
| Osc-C Phase | 0 % |
| Osc-C Lev < Vel | 0 % |
| Osc-C Lev < Key | 0 % |
| Osc-C Wave | Saw D |
| Osc-C Feedb | 0 % |
| Osc-C < Pe | On |
| Osc-C < LFO | On |
| Ce Attack | 885 ms |
| Ce Init | −∞ dB |
| Ce Decay | 1.21 s |
| Ce Peak | 0.0 dB |
| Ce Sustain | 0.0 dB |
| Ce Release | 3.00 s |
| Ce Mode | None |
| Ce Loop | 100 ms |
| Ce Retrig | 1/16 |
| Ce R < Vel | 0 % |
| Osc-D On | Off |
| D Coarse | 1 |
| D Fine | 0 |
| D Freq<Vel | 0 |
| D Quantize | On |
| D Fix On | Off |
| D Fix Freq | 100 Hz |
| D Fix Freq Mul | 1 |
| Osc-D Level | −∞ dB |
| Osc-D Retrig | On |
| Osc-D Phase | 0 % |
| Osc-D Lev < Vel | 50 % |
| Osc-D Lev < Key | 0 % |
| Osc-D Wave | Sine |
| Osc-D Feedb | 0 % |
| Osc-D < Pe | On |
| Osc-D < LFO | On |
| De Attack | 0.00 ms |
| De Init | −∞ dB |
| De Decay | 400 ms |
| De Peak | 0.0 dB |
| De Sustain | -24 dB |
| De Release | 400 ms |
| De Mode | None |
| De Loop | 100 ms |
| De Retrig | 1/16 |
| De R < Vel | 0 % |
| Time | 0 % |
| Time < Key | 0 % |
| Pe On | Off |
| Pe Attack | 0.00 ms |
| Pe Init | +12 st |
| Pe A Slope | 0.0 % |
| Pe Decay | 400 ms |
| Pe Peak | +12 st |
| Pe D Slope | 100 % |
| Pe Sustain | 0 st |
| Pe Release | 50.0 ms |
| Pe End | 0 st |
| Pe R Slope | 100 % |
| Pe Mode | None |
| Pe Loop | 100 ms |
| Pe Retrig | 1/16 |
| Pe R < Vel | 0 % |
| Pe Amount | 100 % |
| Pe Amt A | 100 % |
| Pe Dst B | Off |
| Pe Amt B | 100 % |
| LFO On | Off |
| LFO Type | Sine |
| LFO Range | Low |
| LFO Rate | 100.00 |
| LFO Sync | 1/16 |
| LFO R < K | 0.0 % |
| LFO Retrigger | On |
| LFO Amt | 10 % |
| LFO Amt A | 100 % |
| LFO Dst B | Off |
| LFO Amt B | 100 % |
| LFO < Vel | 0.0 % |
| LFO < Pe | On |
| Le Attack | 0.00 ms |
| Le Init | −∞ dB |
| Le Decay | 600 ms |
| Le Peak | 0.0 dB |
| Le Sustain | 0.0 dB |
| Le Release | 50.0 ms |
| Le End | −∞ dB |
| Le Mode | None |
| Le Loop | 100 ms |
| Le Retrig | 1/16 |
| Le R < Vel | 0 % |
| Filter On | Off |
| Filter Type | Lowpass |
| Filter Circuit - LP/HP | PRD |
| Filter Circuit - BP/NO/Morph | Clean |
| Filter Slope | 24 dB |
| Filter Freq | 2.80 kHz |
| Filter Res | 1.0 % |
| Filter Morph | 0 lp/bp |
| Filter Drive | 0.00 dB |
| Filt < Vel | 0 % |
| Filt < Key | 100 % |
| Fe Amount | 15 % |
| Filt < LFO | Off |
| Fe Attack | 92.0 ms |
| Fe Init | 0.0 % |
| Fe A Slope | 0.0 % |
| Fe Decay | 4.30 s |
| Fe Peak | 100 % |
| Fe D Slope | 100 % |
| Fe Sustain | 72 % |
| Fe Release | 3.00 s |
| Fe End | 0.0 % |
| Fe R Slope | 100 % |
| Fe Mode | None |
| Fe Loop | 100 ms |
| Fe Retrig | 1/16 |
| Fe R < Vel | 0 % |
| Shaper Type | Off |
| Shaper Mix | 100 % |
| Shaper Drive | 0.00 dB |