playgrid.ccRead tutorial

Ember Thump — Operator starting settings

Use these settings for the first synthesis stage. Step 2 enables the additional sources or shaping sections and gives their final values.

Operator

Choose the serial algorithm diagram D → C → B → A → output. With B, C and D switched off, A sounds alone. When B is enabled, its level controls frequency modulation of A; its envelope controls how that brightness changes.

Control Value
Device On On
Algorithm Alg. 1
Transpose -12 st
PB Range +2 st
Volume -10 dB
Panorama C
Pan < Key 0
Pan < Rnd 0
Tone 70 %
Spread 0 %
Glide On Off
Glide Time 50.0 ms
Osc-A On On
A Coarse 1
A Fine 0
A Freq<Vel 0
A Quantize On
A Fix On Off
A Fix Freq 100 Hz
A Fix Freq Mul 1
Osc-A Level -3.0 dB
Osc-A Retrig On
Osc-A Phase 0 %
Osc-A Lev < Vel 60 %
Osc-A Lev < Key 0 %
Osc-A Wave Sine
Osc-A Feedb 0 %
Osc-A < Pe On
Osc-A < LFO On
Ae Attack 0.50 ms
Ae Init -inf dB
Ae Decay 460 ms
Ae Peak 0.0 dB
Ae Sustain -inf dB
Ae Release 150 ms
Ae Mode Trigger
Ae Loop 100 ms
Ae Retrig 1/16
Ae R < Vel 0 %
Osc-B On Off
B Coarse 1
B Fine 0
B Freq<Vel 0
B Quantize On
B Fix On Off
B Fix Freq 100 Hz
B Fix Freq Mul 1
Osc-B Level -inf dB
Osc-B Retrig On
Osc-B Phase 0 %
Osc-B Lev < Vel 50 %
Osc-B Lev < Key 0 %
Osc-B Wave Sine
Osc-B Feedb 0 %
Osc-B < Pe On
Osc-B < LFO On
Be Attack 0.00 ms
Be Init -inf dB
Be Decay 400 ms
Be Peak 0.0 dB
Be Sustain -24 dB
Be Release 400 ms
Be Mode None
Be Loop 100 ms
Be Retrig 1/16
Be R < Vel 0 %
Osc-C On Off
C Coarse 1
C Fine 0
C Freq<Vel 0
C Quantize On
C Fix On Off
C Fix Freq 100 Hz
C Fix Freq Mul 1
Osc-C Level -inf dB
Osc-C Retrig On
Osc-C Phase 0 %
Osc-C Lev < Vel 50 %
Osc-C Lev < Key 0 %
Osc-C Wave Sine
Osc-C Feedb 0 %
Osc-C < Pe On
Osc-C < LFO On
Ce Attack 0.00 ms
Ce Init -inf dB
Ce Decay 400 ms
Ce Peak 0.0 dB
Ce Sustain -24 dB
Ce Release 400 ms
Ce Mode None
Ce Loop 100 ms
Ce Retrig 1/16
Ce R < Vel 0 %
Osc-D On Off
D Coarse 1
D Fine 0
D Freq<Vel 0
D Quantize On
D Fix On Off
D Fix Freq 100 Hz
D Fix Freq Mul 1
Osc-D Level -inf dB
Osc-D Retrig On
Osc-D Phase 0 %
Osc-D Lev < Vel 50 %
Osc-D Lev < Key 0 %
Osc-D Wave Sine
Osc-D Feedb 0 %
Osc-D < Pe On
Osc-D < LFO On
De Attack 0.00 ms
De Init -inf dB
De Decay 400 ms
De Peak 0.0 dB
De Sustain -24 dB
De Release 400 ms
De Mode None
De Loop 100 ms
De Retrig 1/16
De R < Vel 0 %
Time 0 %
Time < Key 0 %
Pe On Off
Pe Attack 0.00 ms
Pe Init +24 st
Pe A Slope 0.0 %
Pe Decay 42.0 ms
Pe Peak +24 st
Pe D Slope 100 %
Pe Sustain 0 st
Pe Release 60.0 ms
Pe End 0 st
Pe R Slope 100 %
Pe Mode None
Pe Loop 100 ms
Pe Retrig 1/16
Pe R < Vel 0 %
Pe Amount 100 %
Pe Amt A 100 %
Pe Dst B Off
Pe Amt B 100 %
LFO On Off
LFO Type Sine
LFO Range Low
LFO Rate 100.00
LFO Sync 1/16
LFO R < K 0.0 %
LFO Retrigger On
LFO Amt 10 %
LFO Amt A 100 %
LFO Dst B Off
LFO Amt B 100 %
LFO < Vel 0.0 %
LFO < Pe On
Le Attack 0.00 ms
Le Init -inf dB
Le Decay 600 ms
Le Peak 0.0 dB
Le Sustain 0.0 dB
Le Release 50.0 ms
Le End -inf dB
Le Mode None
Le Loop 100 ms
Le Retrig 1/16
Le R < Vel 0 %
Filter On Off
Filter Type Lowpass
Filter Circuit - LP/HP Clean
Filter Circuit - BP/NO/Morph Clean
Filter Slope 12 dB
Filter Freq 3.20 kHz
Filter Res 0.0 %
Filter Morph 0 lp/bp
Filter Drive 0.00 dB
Filt < Vel 0 %
Filt < Key 0 %
Fe Amount 0 %
Filt < LFO Off
Fe Attack 0.00 ms
Fe Init 0.0 %
Fe A Slope 0.0 %
Fe Decay 600 ms
Fe Peak 100 %
Fe D Slope 100 %
Fe Sustain 0.0 %
Fe Release 50.0 ms
Fe End 0.0 %
Fe R Slope 100 %
Fe Mode None
Fe Loop 100 ms
Fe Retrig 1/16
Fe R < Vel 0 %
Shaper Type Off
Shaper Mix 100 %
Shaper Drive 0.00 dB

Build guide · Read these settings on playgrid.cc