playgrid.ccRead tutorial

Hollow Pulse Bass — complete SuperCollider settings

Signal flow and implementation

~soundStage is compiled into the SynthDefs. Re-evaluate the complete block after changing it; source and effects are then replaced together. The fixed output multiplier ~soundOutputScale is 0.4482905 and applies after the whole chain at every stage. It is separate from any final gain step.

EnvGen supplies the explicit linear or exponential contours. Exponential floors stay positive. Closing the gate begins each release; a separate silent lifetime envelope frees the note after the longest source release. Shared effects continue independently.

Saw and Pulse use SuperCollider oscillator implementations and startup phases; they replace the source engines and do not scan proprietary wavetables.

Synthesis and effect controls

Stage 1 — Establish the strong second harmonic

Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.

Set ~soundStage = 1 in the full script. A sine at ratio 2 carries the body, with 2 ms attack, 1 s decay to −3.5 dB and 25 ms release. Velocity contributes 35% of its level multiplier. The root will arrive later, leaving the octave deliberately strongest.

SuperCollider control Value
A Sine, ratio 2, 0 dB
Amplitude 2 ms / 1 s / −3.5 dB / 25 ms
Instrument −12 dB

Stage 2 — Replace the sine with a bright saw

Set ~soundStage = 2 in the full script. Change A to a band-limited saw at the same ratio and level. Its upper harmonics brighten the second-harmonic body. This interprets Saw 64 without fixing the source to exactly 64 harmonics at every pitch.

SuperCollider control Value
A waveform Band-limited saw, ratio 2

Stage 3 — Add the quieter root and third-harmonic layer

Set ~soundStage = 3 in the full script. Add ratio-3 saw at −6.5 dB and ratio-1 sine at −15 dB. Their 2 ms / 1 s / −2.5 dB / 25 ms contour keeps them close to the main body while allowing the root to remain quieter than the octave.

SuperCollider control Value
B Saw, ratio 3, −6.5 dB
C Sine, ratio 1, −15 dB
B/C sustain −2.5 dB

Stage 4 — Let the fourth harmonic swell and recede

Set ~soundStage = 4 in the full script. Add a ratio-4 sine at −10 dB with a 280 ms rise, 120 ms fall to zero and 25 ms release. Its independent envelope produces a rounded middle without a repeating LFO.

SuperCollider control Value
D Sine, ratio 4, −10 dB
D envelope 280 ms / 120 ms / zero / 25 ms

Stage 5 — Close the spectral ceiling

Set ~soundStage = 5 in the full script. Use a 280 Hz Butterworth lowpass with a 480 ms envelope moving it by 3.3 octaves at the beginning. This explicit sweep interprets the source 55% modulation amount; no key or velocity tracking is added.

SuperCollider control Value
Filter 280 Hz base; 3.3 octave opening
Filter decay / release 480 / 50 ms

Stage 6 — Add the small downward tuning drift

Set ~soundStage = 6 in the full script. Move every source from −5 to −18 cents over 500 ms and use −8 dB instrument gain. The movement is intentionally cents, not a many-semitone fall. The output remains centered and contains no external effects.

SuperCollider control Value
Pitch −5 → −18 cents in 500 ms
Instrument −8 dB

Connected instrument

The full SuperCollider script contains the complete voice, shared effects, bus ordering and note helper. No external sample or third-party unit is required.