Random Filter Keys — Wavetable starting settings
The static resonant body for step 1, before random modulation and effects.
Voice, wavetable and modulation settings #
Both oscillators use Basics → Basic Shapes, with oscillator effects set to None. Use Poly, 6 voices, Unison None, and Serial filter routing. Sub is On, with Tone 0% and Octave −1. Filter 2 is Off. Unison voice count and amount are inactive while its mode is None.
The MIDI routes shape the initial body. The two LFO 1 routes can be configured here, but their sound is disabled by LFO 1 Amount 0% until step 2:
| Source | Destination | Amount shown in Live |
|---|---|---|
| LFO 1 | Flt 1 Freq | 20 |
| LFO 1 | Flt 1 Drive | 10 |
| Key (MIDI note) | Flt 1 Freq | 100 |
| Vel (velocity) | Amp | 50 |
| PB (pitch bend) | Pitch | 2 st |
Every other modulation connection is zero. Env 2, Env 3 and LFO 2 are unassigned. LFO 1 uses the Random waveform, called Noise in the parameter table.
Wavetable #
| Control | Value |
|---|---|
| Device On | On |
| Osc 1 On | On |
| Osc 1 Transp | 0 st |
| Osc 1 Detune | 2 ct |
| Osc 1 Pos | 67 % |
| Osc 1 Effect 1 | 0.0 % |
| Osc 1 Effect 2 | 0.0 % |
| Osc 1 Pan | C |
| Osc 1 Gain | -6.0 dB |
| Osc 2 On | On |
| Osc 2 Transp | -12 st |
| Osc 2 Detune | 0 ct |
| Osc 2 Pos | 67 % |
| Osc 2 Effect 1 | 0.0 % |
| Osc 2 Effect 2 | 0.0 % |
| Osc 2 Pan | C |
| Osc 2 Gain | -6.0 dB |
| Sub On | On |
| Sub Tone | 0.0 % |
| Sub Gain | -15 dB |
| Sub Transpose | -1 |
| Flt 1 On | On |
| Flt 1 Type | Lowpass |
| Flt 1 LP/HP | PRD |
| Flt 1 BP/NO/MO | Clean |
| Flt 1 Slope | 24 |
| Flt 1 Freq | 300 Hz |
| Flt 1 Res | 67 % |
| Flt 1 Drive | 3.00 dB |
| Flt 1 Morph | 0 lp/bp |
| Flt 2 On | Off |
| Flt 2 Type | Highpass |
| Flt 2 LP/HP | Clean |
| Flt 2 BP/NO/MO | Clean |
| Flt 2 Slope | 12 |
| Flt 2 Freq | 20.0 Hz |
| Flt 2 Res | 0.0 % |
| Flt 2 Drive | 0.00 dB |
| Flt 2 Morph | 0 lp/bp |
| Amp Attack | 57.0 ms |
| Amp Decay | 57.0 ms |
| Amp Release | 57.0 ms |
| Amp A Slope | 0.0 % |
| Amp D Slope | 50 % |
| Amp R Slope | 50 % |
| Amp Sustain | -2.3 dB |
| Amp Loop Mode | None |
| Env 2 Attack | 1.00 ms |
| Env 2 Decay | 600 ms |
| Env 2 Release | 600 ms |
| Env 2 A Slope | 0.0 % |
| Env 2 D Slope | 50 % |
| Env 2 R Slope | 50 % |
| Env 2 Initial | 0.0 % |
| Env 2 Peak | 100 % |
| Env 2 Sustain | 50 % |
| Env 2 Final | 0.0 % |
| Env 2 Loop Mode | None |
| Env 3 Attack | 1.00 ms |
| Env 3 Decay | 600 ms |
| Env 3 Release | 600 ms |
| Env 3 A Slope | 0.0 % |
| Env 3 D Slope | 50 % |
| Env 3 R Slope | 50 % |
| Env 3 Initial | 0.0 % |
| Env 3 Peak | 100 % |
| Env 3 Sustain | 50 % |
| Env 3 Final | 0.0 % |
| Env 3 Loop Mode | None |
| LFO 1 Retrigger | Off |
| LFO 1 Shape | Noise |
| LFO 1 Amount | 0.0 % |
| LFO 1 Shaping | 0.0 % |
| LFO 1 Phase Offset | 0.0° |
| LFO 1 Sync | Free |
| LFO 1 Rate | 2.67 Hz |
| LFO 1 S. Rate | 1/8 |
| LFO 1 Attack Time | 0.00 ms |
| LFO 2 Retrigger | On |
| LFO 2 Shape | Sine |
| LFO 2 Amount | 100 % |
| LFO 2 Shaping | 0.0 % |
| LFO 2 Phase Offset | 0.0° |
| LFO 2 Sync | Free |
| LFO 2 Rate | 1.00 Hz |
| LFO 2 S. Rate | 1/8 |
| LFO 2 Attack Time | 0.00 ms |
| Time | 0.0 % |
| Global Mod Amount | 100 % |
| Unison Amount | 1.5 % |
| Transpose | 0 st |
| Glide | 0.00 ms |
| Volume | -19 dB |