Resonant Pulse Lead — complete Csound settings
Note and effect connections #
Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Its left and right outputs accumulate on shared buses. Instrument 90 processes the buses once per control block, clears the inputs and keeps effect memories active through the tails. Envelopes with release segments extend the note automatically. The score is an audible pitch-and-touch example; the synthesis controls are independent of its particular notes.
Csound interpretation #
These are explicit Csound models, not identical implementations of the Ableton devices. Wavetable positions, proprietary oscillator engines, physical-model macros, filter circuits, envelope slopes and effect algorithms can differ. Modulation depths are specified in octaves, cents or milliseconds rather than treated as universally interchangeable matrix values. Controller inputs such as pitch bend, modulation wheel, pressure and per-note expression are not mapped. Independent score notes do not implement Live's monophonic note-priority or legato system. Any pitch memory or drift included in this instrument is described in its steps.
The source Echo wobble, Analog mono-legato handling and pitch-bend/mod-wheel mappings are omitted. The flanger and echo use explicit delay networks; their feedback includes one control-block latency.
Signal path and controls #
Stage 1 — Combine the two narrow pulses #
Use two 25% pulse waves at −6 dB each, with the second two cents flat as an explicit detuning choice. Amplifier and global gains are −6 dB each. The amplitude opens over 8 ms, holds full sustain and releases over 80 ms. The independent score-note model omits the source last-note-priority legato and controller-driven vibrato.
| Csound control | Value |
|---|---|
| Pulse pair | Width 0.25 each; −6 dB each; second −2 cents |
| Amplitude | 8 ms attack; full sustain; 80 ms release |
| Amplifier / instrument | −6 / −6 dB |
Stage 2 — Open the dark resonant filter briefly #
Use a 220 Hz ladder lowpass with resonance 0.40 and full key tracking. A 5 ms / 143 ms / 0.48 / 143 ms exponential contour moves cutoff by 2.6 octaves. Its short brightness change occurs while the amplitude remains held, giving a pronounced articulation on detached notes.
| Csound control | Value |
|---|---|
| Cutoff | 220 × 2^(2.6 × envelope + (note−60)/12) Hz |
| Resonance | 0.40 |
| Filter contour | 5 ms / 143 ms / 0.48 / 143 ms |
Stage 3 — Round the signal with saturation #
Use +33 dB drive with 78% shaped signal and -14 dB output trim. The smooth curve is tanh(input × 3 × ampdb(drive)) / 3; the other portion stays clean. Louder peaks enter its curved region more strongly, adding harmonics and rounding the envelope. This interprets the source saturation curve rather than implementing its proprietary transfer function.
| Csound control | Value |
|---|---|
| Drive / output | 33 / -14 dB |
| Shaped mix | 78% |
| Input DC removal | Order 2048 |
Stage 4 — Add slow comb movement and echoes #
Sweep opposite delay taps around 1.5 ms by ±0.81 ms at 0.06 Hz. Feedback 78% strengthens the moving comb peaks; 12% wet leaves the lead in front. The explicit short-delay network interprets Phaser-Flanger, with an extra control-block latency in its feedback path. Slowly held notes reveal the sweep. Use 650 ms left and 650 ms right, 21% feedback and 7% wet. Inject the centered input on the left and cross-feed the filtered echoes so later repeats alternate sides. Filter each echo around 632.456 Hz, with a 5.96578-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per 16-sample block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.
| Csound control | Value |
|---|---|
| Center / depth | 1.5 / ±0.81 ms |
| Rate / feedback / wet | 0.06 Hz / 78% / 12% |
| Times | 650 / 650 ms |
| Feedback / wet | 21% / 7% |
| Routing | Crossed, left input |
| Filter center / width | 632.456 Hz / 5.96578 octaves |
| Time LFO | 0 Hz, ±0% |
Output and signal rates #
The script uses 48000 Hz, 16-sample control blocks and stereo output. The fixed output-scale control is 2.04644 and follows the whole chain at every stage, separate from any final gain step. DC-removal blocks, where enabled, use order 2048 to limit low-note attenuation; they add processing delay.