Swelling Pulse Pad — complete SuperCollider settings
Signal flow and implementation #
~soundStage is compiled into the SynthDefs. Re-evaluate the complete block after changing it; source and effects are then replaced together. The fixed output multiplier ~soundOutputScale is 1.745925 and applies after the whole chain at every stage. It is separate from any final gain step.
EnvGen supplies the explicit linear or exponential contours. Exponential floors stay positive. Closing the gate begins each release; a separate silent lifetime envelope frees the note after the longest source release. Shared effects continue independently.
MoogFF replaces the ladder filter. Its gain argument is four times the source 0–1 resonance amount, limited to 3.95; it is a different circuit. Cutoffs are limited to 20–18000 Hz.
LocalIn/LocalOut carry all feedback paths in a single multichannel loop. Recirculation adds one server processing block to each delay; changing block size therefore changes short comb/flanger tuning. DelayC uses seconds, converted from the millisecond tap values in the design.
Saw and Pulse use SuperCollider oscillator implementations and startup phases; they replace the source engines and do not scan proprietary wavetables.
Synthesis and effect controls #
Stage 1 — Build the independently swelling pulse body #
Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.
Set ~soundStage = 1 in the full script. Use two pulse sources at widths 0.33 and 0.36 with gains −6 and −9 dB, the second seven cents flat. Three light unison offsets span ±2.4 cents. Transpose the whole source one octave down and use −11 dB instrument gain. The 1.95 s amplitude opening is independent of the 1.71 s filter rise; the tracked 1360 Hz lowpass moves by 1.25 octaves then settles to 14% envelope sustain.
| SuperCollider control | Value |
|---|---|
| Pulse pair | Widths 0.33/0.36; −6/−9 dB; second −7 cents |
| Unison / transpose | −2.4/0/+2.4 cents / −12 st |
| Amplitude | 1.95 s / 2.10 s / full / 2.40 s |
| Filter | 1360 Hz base; full key tracking; 1.25 octave depth |
| Filter contour | 1.71 s / 2.37 s / 0.14 / 2.10 s |
| Instrument / touch | −11 dB / 50% |
Stage 2 — Add moving stereo chorus #
Set ~soundStage = 2 in the full script. Move two delay taps around 7 ms by ±13 ms at 0.65 Hz, with opposite phases and 30% wet mix. The wet inputs remain full-band. Scale side information by 1; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.
| SuperCollider control | Value |
|---|---|
| Tap center / excursion | 7 / ±13 ms |
| Rate / wet | 0.65 Hz / 30% |
| Wet highpass | Off |
| Width / feedback | 1 / 0 |
| Warmth shaping | 0% smooth-drive interpretation |
Stage 3 — Balance the lower harmonics #
Set ~soundStage = 3 in the full script. Use a fixed low shelf at 75 Hz and three peaking filters. The shelf restrains the deepest energy, 160 Hz adds body, 392 Hz emphasizes one middle region and 523 Hz softens another. These centers stay fixed as notes change. The explicit parametric network interprets EQ Eight without its adaptive-Q or oversampling behavior.
| SuperCollider control | Value |
|---|---|
| Low shelf | 75 Hz, −5 dB, Q 0.71 |
| Peaks | 160 Hz +2 dB Q0.8; 392 Hz +4.5 dB Q4; 523 Hz −2.5 dB Q4 |
Stage 4 — Add filtered stereo echoes #
Set ~soundStage = 4 in the full script. Use 300 ms left and 325 ms right, 12% feedback and 14% wet. Feed each channel back into itself, keeping the unequal timing paths independent. Filter each echo around 900 Hz, with a 5-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per server processing block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.
| SuperCollider control | Value |
|---|---|
| Times | 300 / 325 ms |
| Feedback / wet | 12% / 14% |
| Routing | Independent channels |
| Filter center / width | 900 Hz / 5 octaves |
| Time LFO | 0 Hz, ±0% |
Connected instrument #
The full SuperCollider script contains the complete voice, shared effects, bus ordering and note helper. No external sample or third-party unit is required.