Step 01 / 4
Build the first oscillator and touch contour #
Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.
Set ~soundStage = 1 in the full script. Use saw at -6 dB with pulse width 50% when applicable. The contour has 0.005 s attack, 0.75 s exponential decay to 0.65 sustain and 0.114 s release. Multiply by velocity^2.5; this explicit power curve interprets the source velocity response. Keep the signal centered before adding effects.
| SuperCollider control | Value |
|---|---|
| Source | Saw, -6.0 dB; width not used |
| Amplitude A/D/S/R | 0.005 / 0.75 / 0.65 / 0.114 |
| Amplifier / instrument | -6.0 dB / -6.0 dB |
| Velocity power | 2.5 |
Sound after step 1 — WebM/Opus
Next: Add the second oscillator and resonant contour →Step 02 / 4
Add the second oscillator and resonant contour #
Set ~soundStage = 2 in the full script. Add rect at -12 dB, tuned by 0 octaves. Use a Low-pass 24dB/oct interpretation with 209 Hz base cutoff, 3.2 octave envelope depth and 0.5 octave-per-octave pitch tracking. The contour opens then settles quickly while the amplitude remains. Smooth input drive interprets Sym1; the ladder or second-order lowpass is a different circuit. The 1.7 Hz LFO, where enabled, restarts per note rather than running freely.
| SuperCollider control | Value |
|---|---|
| Second source | Rect; -12 dB; width 45 % |
| Filter base / source resonance | 209 Hz / 0.52 |
| Filter A/D/S/R | 0.005 / 0.21 / 0.08 / 0.13 |
| Envelope / key / LFO depth | 3.2 / 0.5 / 0.12 octaves |
| LFO rate | 1.7 Hz |
| Filter input shape | tanh(input × 1.4) / 1.4 |
For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.
Sound after step 2 — WebM/Opus
Next: Round the signal with saturation →Step 03 / 4
Round the signal with saturation #
Set ~soundStage = 3 in the full script. Use +3.5 dB drive with 70% shaped signal and -3 dB output trim. The smooth curve is tanh(input × 3 × drive.dbamp) / 3; the other portion stays clean. Louder peaks enter its curved region more strongly, adding harmonics and rounding the envelope. This interprets the source saturation curve rather than implementing its proprietary transfer function.
| SuperCollider control | Value |
|---|---|
| Drive / output | 3.5 / -3 dB |
| Shaped mix | 70% |
| Input DC removal | LeakDC, coefficient 0.995 |
Sound after step 3 — WebM/Opus
Next: Set the final width and gain →Step 04 / 4
Set the final width and gain #
Set ~soundStage = 4 in the full script. Use 2.27 dB gain after the effects. Average the channels for identical mono outputs. Apply LeakDC DC removal with coefficient 0.995. The fixed ~soundOutputScale gain follows the complete effect chain at every stage. The effects Synth reads the stereo bus after the note group, and continues through note releases.
| SuperCollider control | Value |
|---|---|
| Final gain | 2.27 dB |
| Width | Mono |
| Bass side cutoff | Off |
| DC removal | LeakDC, coefficient 0.995 |
Sound after step 4 — WebM/Opus
Audio & settings ↓