Step 01 / 4
Shape the drifting bass body #
Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.
Set ~soundStage = 1 in the full script. Use saw at -8.0 dB, with ±0.6 cents of slow note-local pitch drift. Set attack 0.0068 s, decay 1.29 s, sustain 0.7 and release 0.203 s. Keep the source centered. This replaces Drift's irregular oscillator instability with a small sine drift; glide and mono note-priority are not implemented.
| SuperCollider control | Value |
|---|---|
| Wave / gain | Saw / -8.0 dB |
| Amplitude A/D/S/R | 0.0068 / 1.29 / 0.7 / 0.203 |
| Instrument / velocity | -6.0 dB / 40 % |
| Drift | ±0.6 cents at 0.19 Hz |
Sound after step 1 — WebM/Opus
Next: Add the sub and lowpass movement →Step 02 / 4
Add the sub and lowpass movement #
Set ~soundStage = 2 in the full script. Add an octave-down sine at -7.0 dB. Route both sources through a 244 Hz ladder lowpass with 0.25 resonance, followed by the 25 Hz highpass. The second envelope moves cutoff by 0.9 octaves; keyboard and velocity amounts add their own opening. The filter type and modulation scaling interpret the source rather than copy its Type II circuit.
| SuperCollider control | Value |
|---|---|
| Sub | Octave down, -7.0 dB |
| Cutoff / resonance | 244 Hz / 0.25 |
| Filter A/D/S/R | 0.002 / 0.45 / 0.2 / 0.2 |
| Envelope / key / velocity depth | 0.9 / 0.6 / 0.24 octaves |
For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.
Sound after step 2 — WebM/Opus
Next: Round the signal with saturation →Step 03 / 4
Round the signal with saturation #
Set ~soundStage = 3 in the full script. Use +2.3 dB drive with 70% shaped signal and -2 dB output trim. The smooth curve is tanh(input × 3 × drive.dbamp) / 3; the other portion stays clean. Louder peaks enter its curved region more strongly, adding harmonics and rounding the envelope. This interprets the source saturation curve rather than implementing its proprietary transfer function.
| SuperCollider control | Value |
|---|---|
| Drive / output | 2.3 / -2 dB |
| Shaped mix | 70% |
| Input DC removal | LeakDC, coefficient 0.995 |
Sound after step 3 — WebM/Opus
Next: Set the final width and gain →Step 04 / 4
Set the final width and gain #
Set ~soundStage = 4 in the full script. Use 2.86 dB gain after the effects. Average the channels for identical mono outputs. Apply LeakDC DC removal with coefficient 0.995. The fixed ~soundOutputScale gain follows the complete effect chain at every stage. The effects Synth reads the stereo bus after the note group, and continues through note releases.
| SuperCollider control | Value |
|---|---|
| Final gain | 2.86 dB |
| Width | Mono |
| Bass side cutoff | Off |
| DC removal | LeakDC, coefficient 0.995 |
Sound after step 4 — WebM/Opus
Audio & settings ↓