playgrid.ccRead tutorial

Resonant Octave Mist — complete Csound settings

Note and effect connections

Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Its left and right outputs accumulate on shared buses. Instrument 90 processes the buses once per control block, clears the inputs and keeps effect memories active through the tails. Envelopes with release segments extend the note automatically. The score is an audible pitch-and-touch example; the synthesis controls are independent of its particular notes.

Csound interpretation

These are explicit Csound models, not identical implementations of the Ableton devices. Wavetable positions, proprietary oscillator engines, physical-model macros, filter circuits, envelope slopes and effect algorithms can differ. Modulation depths are specified in octaves, cents or milliseconds rather than treated as universally interchangeable matrix values. Controller inputs such as pitch bend, modulation wheel, pressure and per-note expression are not mapped. Independent score notes do not implement Live's monophonic note-priority or legato system. Any pitch memory or drift included in this instrument is described in its steps.

Signal path and controls

Stage 1 — Make a narrow, singing noise band

Filter quiet white noise through two narrow resonances. The center is 890 Hz at MIDI 69 and tracks the keyboard; the channels differ by seven cents. A 0.30 Hz filter motion and slower pitch drift loosen the ringing. Shape amplitude with a 2.20 s attack, full sustain and 3.20 s release. This noise-band model approximates the source resonant tone without implementing Drift's self-oscillating filter.

Csound control Value
Noise / instrument −24 / −12 dB
Centers 890 Hz at MIDI 69, full tracking; 7-cent channel separation
Bandwidth Center / 60
Motion 0.30 Hz, ±0.003 octaves; slower ±3 cents
Amplitude 2.20 s attack, full sustain, 3.20 s release

Stage 2 — Add the upper octave echo

Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 2, plus 3 cents. The delay begins at 375 ms and moves across the additional window. Blend 4% shifted signal, lowpassed at 2000 Hz, with 3.3% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.

Csound control Value
Pitch ratio / cents 2 / 3
Base delay / window 375 / 100 ms
Feedback / wet 3.3% / 4%
Tone 2000 Hz

Stage 3 — Add the lower octave echo

Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 0.5, plus -3 cents. The delay begins at 500 ms and moves across the additional window. Blend 2.5% shifted signal, lowpassed at 1800 Hz, with 6.8% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.

Csound control Value
Pitch ratio / cents 0.5 / -3
Base delay / window 500 / 100 ms
Feedback / wet 6.8% / 2.5%
Tone 1800 Hz

Stage 4 — Surround the tone with a damped room

Feed the preceding signal through 10 ms predelay into reverbsc, with feedback 0.9383, 1800 Hz damping and 50% wet mix. Predelay leaves the initial articulation in front; feedback prolongs the tail, while damping darkens repeated circulation. The source room decay setting is 11 seconds, but Csound feedback is not a decay-time control: this is an interpretation of that space, with different diffusion and modulation.

Csound control Value
Source decay target 11 s (not a measured Csound decay)
Predelay / feedback 10 ms / 0.9383
Damping / wet 1800 Hz / 50%
Room side multiplier 1
Room input cuts Off

Output and signal rates

The script uses 48000 Hz, 16-sample control blocks and stereo output. The fixed output-scale control is 216.0613 and follows the whole chain at every stage, separate from any final gain step. DC-removal blocks, where enabled, use order 2048 to limit low-note attenuation; they add processing delay.

Build guide and full script · Starting settings