Step 01 / 4
Make a narrow, singing noise band #
Set giStage init 1 in the full script. Filter quiet white noise through two narrow resonances. The center is 890 Hz at MIDI 69 and tracks the keyboard; the channels differ by seven cents. A 0.30 Hz filter motion and slower pitch drift loosen the ringing. Shape amplitude with a 2.20 s attack, full sustain and 3.20 s release. This noise-band model approximates the source resonant tone without implementing Drift's self-oscillating filter.
| Csound control | Value |
|---|---|
| Noise / instrument | −24 / −12 dB |
| Centers | 890 Hz at MIDI 69, full tracking; 7-cent channel separation |
| Bandwidth | Center / 60 |
| Motion | 0.30 Hz, ±0.003 octaves; slower ±3 cents |
| Amplitude | 2.20 s attack, full sustain, 3.20 s release |
Sound after step 1 — WebM/Opus
Next: Add the upper octave echo →Step 02 / 4
Add the upper octave echo #
Set giStage init 2 in the full script. Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 2, plus 3 cents. The delay begins at 375 ms and moves across the additional window. Blend 4% shifted signal, lowpassed at 2000 Hz, with 3.3% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.
| Csound control | Value |
|---|---|
| Pitch ratio / cents | 2 / 3 |
| Base delay / window | 375 / 100 ms |
| Feedback / wet | 3.3% / 4% |
| Tone | 2000 Hz |
Sound after step 2 — WebM/Opus
Next: Add the lower octave echo →Step 03 / 4
Add the lower octave echo #
Set giStage init 3 in the full script. Use two overlapping 100 ms delay windows to shift the preceding signal by a frequency ratio of 0.5, plus -3 cents. The delay begins at 500 ms and moves across the additional window. Blend 2.5% shifted signal, lowpassed at 1800 Hz, with 6.8% local feedback. The next stage receives this whole blend, so series octave relationships also interact. This moving-window shifter differs from Ableton Shifter and adds window latency.
| Csound control | Value |
|---|---|
| Pitch ratio / cents | 0.5 / -3 |
| Base delay / window | 500 / 100 ms |
| Feedback / wet | 6.8% / 2.5% |
| Tone | 1800 Hz |
Sound after step 3 — WebM/Opus
Next: Surround the tone with a damped room →Step 04 / 4
Surround the tone with a damped room #
Set giStage init 4 in the full script. Feed the preceding signal through 10 ms predelay into reverbsc, with feedback 0.9383, 1800 Hz damping and 50% wet mix. Predelay leaves the initial articulation in front; feedback prolongs the tail, while damping darkens repeated circulation. The source room decay setting is 11 seconds, but Csound feedback is not a decay-time control: this is an interpretation of that space, with different diffusion and modulation.
| Csound control | Value |
|---|---|
| Source decay target | 11 s (not a measured Csound decay) |
| Predelay / feedback | 10 ms / 0.9383 |
| Damping / wet | 1800 Hz / 50% |
| Room side multiplier | 1 |
| Room input cuts | Off |
Sound after step 4 — WebM/Opus
Audio & settings ↓