playgrid.ccRead tutorial

Tutorial 003 / Csound

Build Slow Harmonic Pad in Csound

Build Slow Harmonic Pad in Csound with drawn harmonics synthesis, explicit contours and the sound-shaping chain explained in the guide.

3 stepsDrawn HarmonicsCsound 6

Listen to the finished sound

Download WEBM ↓

Follow the synthesis steps in order. Use the audio examples and device settings alongside the instructions.

Step 01 / 3

Draw the high ringing center

Set giStage init 1 in the full script. Use the three-partial A table at ratio 9 and global transposition −14 semitones. Its partials have levels 0, −2.3 and −10.5 dB. A opens over 2.057 seconds and releases over 4.3 seconds. The high ratio supplies the ringing center; table amplitudes remain unnormalized.

Csound control Value
A partials 1: 0 dB; 2: −2.3 dB; 3: −10.5 dB
A ratio / transpose 9 / −14 st
A envelope 2.057 s attack; full sustain; 4.3 s release
Instrument −33 dB

Sound after step 1 — WebM/Opus

Next: Fill in the lower harmonic spectra →

Step 02 / 3

Fill in the lower harmonic spectra

Set giStage init 2 in the full script. Add the documented B and C spectra through partial 38, with different attacks and a B frequency ratio of 1.003. Add D with its quiet low odd harmonics. The exact partial coefficients are written in the full script. Their different onset and release times make the texture change as it grows and fades; B fine tuning is an explicit ratio interpretation.

Csound control Value
B −1.9 dB; 2.294 s attack; 3.7 s release; ratio 1.003
C −9.1 dB; 2.8 s attack; 4.1 s release; ratio 1
D −6 dB; 2.38 s attack; 4 s release; ratio 1
Tables Unnormalized GEN10; unlisted partials zero

Sound after step 2 — WebM/Opus

Next: Add moving stereo chorus →

Step 03 / 3

Add moving stereo chorus

Set giStage init 3 in the full script. Also apply source amplitude movement 0.82 + 0.18 × sine(0.35 Hz). The explicit 0.35 Hz rate interprets the source displayed LFO rate 35. Move two delay taps around 7 ms by ±3.4 ms at 0.9 Hz, with opposite phases and 100% wet mix. The wet inputs remain full-band. Scale side information by 1.3; tap feedback is -0.02. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.

Csound control Value
Tap center / excursion 7 / ±3.4 ms
Rate / wet 0.9 Hz / 100%
Wet highpass Off
Width / feedback 1.3 / -0.02
Warmth shaping 0% smooth-drive interpretation
Source amplitude LFO 0.35 Hz; multiplier 0.82 + 0.18 × sine

Sound after step 3 — WebM/Opus

Audio & settings ↓

Audio & settings

Audio recordings and settings for this tutorial.

Full Csound script

This document contains the complete Slow Harmonic Pad source, shared effects and example score. giStage selects the cumulative stages from 1 to 3; 3 is the finished sound.

<CsoundSynthesizer>
<CsOptions>
-odac -d
</CsOptions>
<CsInstruments>
sr = 48000
ksmps = 16
nchnls = 2
0dbfs = 1

giStage init 3
giOutputScale init 1.128653
giSine ftgen 0, 0, 16384, 10, 1
gaLeft init 0
gaRight init 0
giPartA ftgen 0,0,16384,-10,1,0.767361489,0.298538262,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
giPartB ftgen 0,0,16384,-10,0,0.0462381021,0,0.0518800039,0,0.0446683592,0,0.0298538262,0,0.0812830516,0.199526231,0.167880402,0.221309471,0.201836636,0.136458314,0.103514217,0.0776247117,0,0.192752491,0.266072506,0.221309471,0.216271852,0.171790839,0.0699841996,0.0575439937,0.0891250938,0,0.147910839,0.28840315,0.0812830516,0.221309471,0.0323593657,0.0758577575,0.034673685,0.181970086,0.0416869383,0.167880402,0.0653130553
giPartC ftgen 0,0,16384,-10,0,0.0462381021,0,0.0518800039,0,0.0446683592,0,0.0298538262,0,0.0812830516,0.199526231,0.167880402,0.221309471,0.201836636,0.136458314,0.103514217,0.0776247117,0,0.192752491,0.266072506,0.221309471,0.216271852,0.171790839,0.0699841996,0.0575439937,0.0891250938,0,0.147910839,0.28840315,0.0812830516,0.221309471,0.0323593657,0.0758577575,0.034673685,0.181970086,0.0416869383,0.167880402,0.0653130553
giPartD ftgen 0,0,16384,-10,0.120226443,0,0.24266101,0,0.254097271,0,0.144543977,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
instr 1
  iHz = cpsmidinn(p4)
  iVelocity = limit(p5, 0, 1)
  kHz = iHz*pow(2,-14/12)
  kA linsegr 0, 2.057, 1, 0.5, 1, 4.3, 0
  aA oscili kA,kHz*9,giPartA
  aSource = aA*(0.6+0.4*iVelocity)
  if giStage >= 2 then
  kB linsegr 0, 2.294, 1, 0.5, 1, 3.7, 0
  aB oscili kB*ampdb(-1.9),kHz*1.003,giPartB
  aSource = aSource+aB*(1+0*iVelocity)
  kC linsegr 0, 2.8, 1, 0.5, 1, 4.1, 0
  aC oscili kC*ampdb(-9.1),kHz*1,giPartC
  aSource = aSource+aC*(1+0*iVelocity)
  kD linsegr 0, 2.38, 1, 0.5, 1, 4, 0
  aD oscili kD*ampdb(-6),kHz*1,giPartD
  aSource = aSource+aD*(0.65+0.35*iVelocity)
  endif
  if giStage >= 3 then
  kTrem oscili 1,0.35,giSine
  aSource = aSource*(0.82+0.18*kTrem)
  endif
  aL = aSource*ampdb(-33)
  aR = aL
  gaLeft = gaLeft+aL
  gaRight = gaRight+aR
endin
instr 90
  aL = gaLeft
  aR = gaRight
  if giStage >= 3 then
    aChFbL init 0
    aChFbR init 0
    aChInL = aL
    aChInR = aR
    kCh oscili 1, 0.9, giSine
    aChTimeL interp 7+3.4000000000000004*kCh
    aChTimeR interp 7-3.4000000000000004*kCh
    aTapL vdelay3 aChInL+aChFbL*-0.02, aChTimeL, 80
    aTapR vdelay3 aChInR+aChFbR*-0.02, aChTimeR, 80
    aChFbL = aTapL
    aChFbR = aTapR
    aL = aL*0+aTapL*1
    aR = aR*0+aTapR*1
    aChMid = (aL+aR)*0.5
    aChSide = (aL-aR)*0.5*1.3
    aL = aChMid+aChSide
    aR = aChMid-aChSide
  endif
  outs aL*giOutputScale, aR*giOutputScale
  clear gaLeft, gaRight
endin
</CsInstruments>
<CsScore>
; p3 held seconds, p4 MIDI pitch, p5 velocity
i 1 0 4 48 0.8
i 1 9.3 4 55 0.9
i 1 18.6 4 60 0.72
i 90 0 32.9
e
</CsScore>
</CsoundSynthesizer>