Step 01 / 4
Build the independently swelling pulse body #
Set giStage init 1 in the full script. Use two pulse sources at widths 0.33 and 0.36 with gains −6 and −9 dB, the second seven cents flat. Three light unison offsets span ±2.4 cents. Transpose the whole source one octave down and use −11 dB instrument gain. The 1.95 s amplitude opening is independent of the 1.71 s filter rise; the tracked 1360 Hz lowpass moves by 1.25 octaves then settles to 14% envelope sustain.
| Csound control | Value |
|---|---|
| Pulse pair | Widths 0.33/0.36; −6/−9 dB; second −7 cents |
| Unison / transpose | −2.4/0/+2.4 cents / −12 st |
| Amplitude | 1.95 s / 2.10 s / full / 2.40 s |
| Filter | 1360 Hz base; full key tracking; 1.25 octave depth |
| Filter contour | 1.71 s / 2.37 s / 0.14 / 2.10 s |
| Instrument / touch | −11 dB / 50% |
Sound after step 1 — WebM/Opus
Next: Add moving stereo chorus →Step 02 / 4
Add moving stereo chorus #
Set giStage init 2 in the full script. Move two delay taps around 7 ms by ±13 ms at 0.65 Hz, with opposite phases and 30% wet mix. The wet inputs remain full-band. Scale side information by 1; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.
| Csound control | Value |
|---|---|
| Tap center / excursion | 7 / ±13 ms |
| Rate / wet | 0.65 Hz / 30% |
| Wet highpass | Off |
| Width / feedback | 1 / 0 |
| Warmth shaping | 0% smooth-drive interpretation |
Sound after step 2 — WebM/Opus
Next: Balance the lower harmonics →Step 03 / 4
Balance the lower harmonics #
Set giStage init 3 in the full script. Use a fixed low shelf at 75 Hz and three peaking filters. The shelf restrains the deepest energy, 160 Hz adds body, 392 Hz emphasizes one middle region and 523 Hz softens another. These centers stay fixed as notes change. The explicit parametric network interprets EQ Eight without its adaptive-Q or oversampling behavior.
| Csound control | Value |
|---|---|
| Low shelf | 75 Hz, −5 dB, Q 0.71 |
| Peaks | 160 Hz +2 dB Q0.8; 392 Hz +4.5 dB Q4; 523 Hz −2.5 dB Q4 |
Sound after step 3 — WebM/Opus
Next: Add filtered stereo echoes →Step 04 / 4
Add filtered stereo echoes #
Set giStage init 4 in the full script. Use 300 ms left and 325 ms right, 12% feedback and 14% wet. Feed each channel back into itself, keeping the unequal timing paths independent. Filter each echo around 900 Hz, with a 5-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per 16-sample block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.
| Csound control | Value |
|---|---|
| Times | 300 / 325 ms |
| Feedback / wet | 12% / 14% |
| Routing | Independent channels |
| Filter center / width | 900 Hz / 5 octaves |
| Time LFO | 0 Hz, ±0% |
Sound after step 4 — WebM/Opus
Audio & settings ↓