Swelling Pulse Pad — complete Csound settings
Note and effect connections #
Instrument 1 uses p3 for held seconds, p4 for MIDI pitch and p5 for velocity from 0 to 1. Its left and right outputs accumulate on shared buses. Instrument 90 processes the buses once per control block, clears the inputs and keeps effect memories active through the tails. Envelopes with release segments extend the note automatically. The score is an audible pitch-and-touch example; the synthesis controls are independent of its particular notes.
Csound interpretation #
These are explicit Csound models, not identical implementations of the Ableton devices. Wavetable positions, proprietary oscillator engines, physical-model macros, filter circuits, envelope slopes and effect algorithms can differ. Modulation depths are specified in octaves, cents or milliseconds rather than treated as universally interchangeable matrix values. Controller inputs such as pitch bend, modulation wheel, pressure and per-note expression are not mapped. Independent score notes do not implement Live's monophonic note-priority or legato system. Any pitch memory or drift included in this instrument is described in its steps.
Signal path and controls #
Stage 1 — Build the independently swelling pulse body #
Use two pulse sources at widths 0.33 and 0.36 with gains −6 and −9 dB, the second seven cents flat. Three light unison offsets span ±2.4 cents. Transpose the whole source one octave down and use −11 dB instrument gain. The 1.95 s amplitude opening is independent of the 1.71 s filter rise; the tracked 1360 Hz lowpass moves by 1.25 octaves then settles to 14% envelope sustain.
| Csound control | Value |
|---|---|
| Pulse pair | Widths 0.33/0.36; −6/−9 dB; second −7 cents |
| Unison / transpose | −2.4/0/+2.4 cents / −12 st |
| Amplitude | 1.95 s / 2.10 s / full / 2.40 s |
| Filter | 1360 Hz base; full key tracking; 1.25 octave depth |
| Filter contour | 1.71 s / 2.37 s / 0.14 / 2.10 s |
| Instrument / touch | −11 dB / 50% |
Stage 2 — Add moving stereo chorus #
Move two delay taps around 7 ms by ±13 ms at 0.65 Hz, with opposite phases and 30% wet mix. The wet inputs remain full-band. Scale side information by 1; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.
| Csound control | Value |
|---|---|
| Tap center / excursion | 7 / ±13 ms |
| Rate / wet | 0.65 Hz / 30% |
| Wet highpass | Off |
| Width / feedback | 1 / 0 |
| Warmth shaping | 0% smooth-drive interpretation |
Stage 3 — Balance the lower harmonics #
Use a fixed low shelf at 75 Hz and three peaking filters. The shelf restrains the deepest energy, 160 Hz adds body, 392 Hz emphasizes one middle region and 523 Hz softens another. These centers stay fixed as notes change. The explicit parametric network interprets EQ Eight without its adaptive-Q or oversampling behavior.
| Csound control | Value |
|---|---|
| Low shelf | 75 Hz, −5 dB, Q 0.71 |
| Peaks | 160 Hz +2 dB Q0.8; 392 Hz +4.5 dB Q4; 523 Hz −2.5 dB Q4 |
Stage 4 — Add filtered stereo echoes #
Use 300 ms left and 325 ms right, 12% feedback and 14% wet. Feed each channel back into itself, keeping the unequal timing paths independent. Filter each echo around 900 Hz, with a 5-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per 16-sample block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.
| Csound control | Value |
|---|---|
| Times | 300 / 325 ms |
| Feedback / wet | 12% / 14% |
| Routing | Independent channels |
| Filter center / width | 900 Hz / 5 octaves |
| Time LFO | 0 Hz, ±0% |
Output and signal rates #
The script uses 48000 Hz, 16-sample control blocks and stereo output. The fixed output-scale control is 0.5408041 and follows the whole chain at every stage, separate from any final gain step. DC-removal blocks, where enabled, use order 2048 to limit low-note attenuation; they add processing delay.