Resonant Pulse Lead — complete SuperCollider settings
Signal flow and implementation #
~soundStage is compiled into the SynthDefs. Re-evaluate the complete block after changing it; source and effects are then replaced together. The fixed output multiplier ~soundOutputScale is 2.15634 and applies after the whole chain at every stage. It is separate from any final gain step.
EnvGen supplies the explicit linear or exponential contours. Exponential floors stay positive. Closing the gate begins each release; a separate silent lifetime envelope frees the note after the longest source release. Shared effects continue independently.
MoogFF replaces the ladder filter. Its gain argument is four times the source 0–1 resonance amount, limited to 3.95; it is a different circuit. Cutoffs are limited to 20–18000 Hz.
LeakDC uses coefficient 0.995. It replaces the longer-window Csound DC blocker, with a different low-frequency response and latency.
LocalIn/LocalOut carry all feedback paths in a single multichannel loop. Recirculation adds one server processing block to each delay; changing block size therefore changes short comb/flanger tuning. DelayC uses seconds, converted from the millisecond tap values in the design.
Saw and Pulse use SuperCollider oscillator implementations and startup phases; they replace the source engines and do not scan proprietary wavetables.
Synthesis and effect controls #
Stage 1 — Combine the two narrow pulses #
Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.
Set ~soundStage = 1 in the full script. Use two 25% pulse waves at −6 dB each, with the second two cents flat as an explicit detuning choice. Amplifier and global gains are −6 dB each. The amplitude opens over 8 ms, holds full sustain and releases over 80 ms. The independently retriggered note model omits the source last-note-priority legato and controller-driven vibrato.
| SuperCollider control | Value |
|---|---|
| Pulse pair | Width 0.25 each; −6 dB each; second −2 cents |
| Amplitude | 8 ms attack; full sustain; 80 ms release |
| Amplifier / instrument | −6 / −6 dB |
Stage 2 — Open the dark resonant filter briefly #
Set ~soundStage = 2 in the full script. Use a 220 Hz ladder lowpass with resonance 0.40 and full key tracking. A 5 ms / 143 ms / 0.48 / 143 ms exponential contour moves cutoff by 2.6 octaves. Its short brightness change occurs while the amplitude remains held, giving a pronounced articulation on detached notes.
| SuperCollider control | Value |
|---|---|
| Cutoff | 220 × 2^(2.6 × envelope + (note−60)/12) Hz |
| Resonance | 0.40 |
| Filter contour | 5 ms / 143 ms / 0.48 / 143 ms |
For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.
Stage 3 — Round the signal with saturation #
Set ~soundStage = 3 in the full script. Use +33 dB drive with 78% shaped signal and -14 dB output trim. The smooth curve is tanh(input × 3 × drive.dbamp) / 3; the other portion stays clean. Louder peaks enter its curved region more strongly, adding harmonics and rounding the envelope. This interprets the source saturation curve rather than implementing its proprietary transfer function.
| SuperCollider control | Value |
|---|---|
| Drive / output | 33 / -14 dB |
| Shaped mix | 78% |
| Input DC removal | LeakDC, coefficient 0.995 |
Stage 4 — Add slow comb movement and echoes #
Set ~soundStage = 4 in the full script. Sweep opposite delay taps around 1.5 ms by ±0.81 ms at 0.06 Hz. Feedback 78% strengthens the moving comb peaks; 12% wet leaves the lead in front. The explicit short-delay network interprets Phaser-Flanger, with an extra control-block latency in its feedback path. Slowly held notes reveal the sweep. Use 650 ms left and 650 ms right, 21% feedback and 7% wet. Inject the centered input on the left and cross-feed the filtered echoes so later repeats alternate sides. Filter each echo around 632.456 Hz, with a 5.96578-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per server processing block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.
| SuperCollider control | Value |
|---|---|
| Center / depth | 1.5 / ±0.81 ms |
| Rate / feedback / wet | 0.06 Hz / 78% / 12% |
| Times | 650 / 650 ms |
| Feedback / wet | 21% / 7% |
| Routing | Crossed, left input |
| Filter center / width | 632.456 Hz / 5.96578 octaves |
| Time LFO | 0 Hz, ±0% |
Connected instrument #
The full SuperCollider script contains the complete voice, shared effects, bus ordering and note helper. No external sample or third-party unit is required.