Three Octave Bass complete settings
Use Operator → Saturator. A, B and C mix directly into the output; the driven filter and Saturator are On. Values for inactive modules remain listed but do not affect the sound.
Instrument global settings #
Use Operator in Live 12 Suite.
Set Operator to Voices 1, global Retrig Off, interpolation and antialias On. Center pan and keep both pan modulations at zero. A, B and C use Saw D with frequency quantization On and Fixed Off. D, Glide, LFO, Pitch Env and Shaper remain Off.
For the A, B and C amplitude envelopes, set End −∞ dB, Attack Slope 0%, Decay Slope 100% and Release Slope 100%. Keep envelope time/velocity scaling at 0%. These controls supplement the tables below.
The Fine settings use Operator's own units, not cents. Keep the −24 st transposition and 100% filter keyboard tracking together with the displayed cutoff.
Operator parameters #
| Parameter | Displayed value |
|---|---|
| Device On | On |
| Algorithm | Alg. 11 |
| Transpose | -24 st |
| PB Range | +2 st |
| Volume | -15 dB |
| Panorama | C |
| Pan < Key | 0 |
| Pan < Rnd | 0 |
| Tone | 100 % |
| Spread | 0 % |
| Glide On | Off |
| Glide Time | 50.0 ms |
| Osc-A On | On |
| A Coarse | 1 |
| A Fine | 0 |
| A Freq<Vel | 0 |
| A Quantize | On |
| A Fix On | Off |
| A Fix Freq | 100 Hz |
| A Fix Freq Mul | 1 |
| Osc-A Level | -9.1 dB |
| Osc-A Retrig | Off |
| Osc-A Phase | 0 % |
| Osc-A Lev < Vel | 0 % |
| Osc-A Lev < Key | 0 % |
| Osc-A Wave | Saw D |
| Osc-A Feedb | 0 % |
| Osc-A < Pe | On |
| Osc-A < LFO | On |
| Ae Attack | 2.00 ms |
| Ae Init | −∞ dB |
| Ae Decay | 500 ms |
| Ae Peak | 0.0 dB |
| Ae Sustain | 0.0 dB |
| Ae Release | 44.9 ms |
| Ae Mode | None |
| Ae Loop | 100 ms |
| Ae Retrig | 1/16 |
| Ae R < Vel | 0 % |
| Osc-B On | On |
| B Coarse | 2 |
| B Fine | 1 |
| B Freq<Vel | 0 |
| B Quantize | On |
| B Fix On | Off |
| B Fix Freq | 100 Hz |
| B Fix Freq Mul | 1 |
| Osc-B Level | -9.1 dB |
| Osc-B Retrig | Off |
| Osc-B Phase | 0 % |
| Osc-B Lev < Vel | 0 % |
| Osc-B Lev < Key | 0 % |
| Osc-B Wave | Saw D |
| Osc-B Feedb | 0 % |
| Osc-B < Pe | On |
| Osc-B < LFO | On |
| Be Attack | 2.00 ms |
| Be Init | −∞ dB |
| Be Decay | 500 ms |
| Be Peak | 0.0 dB |
| Be Sustain | 0.0 dB |
| Be Release | 44.9 ms |
| Be Mode | None |
| Be Loop | 100 ms |
| Be Retrig | 1/16 |
| Be R < Vel | 0 % |
| Osc-C On | On |
| C Coarse | 4 |
| C Fine | 0 |
| C Freq<Vel | 0 |
| C Quantize | On |
| C Fix On | Off |
| C Fix Freq | 100 Hz |
| C Fix Freq Mul | 1 |
| Osc-C Level | -9.1 dB |
| Osc-C Retrig | Off |
| Osc-C Phase | 0 % |
| Osc-C Lev < Vel | 0 % |
| Osc-C Lev < Key | 0 % |
| Osc-C Wave | Saw D |
| Osc-C Feedb | 0 % |
| Osc-C < Pe | On |
| Osc-C < LFO | On |
| Ce Attack | 2.00 ms |
| Ce Init | −∞ dB |
| Ce Decay | 500 ms |
| Ce Peak | 0.0 dB |
| Ce Sustain | 0.0 dB |
| Ce Release | 44.9 ms |
| Ce Mode | None |
| Ce Loop | 100 ms |
| Ce Retrig | 1/16 |
| Ce R < Vel | 0 % |
| Osc-D On | Off |
| D Coarse | 1 |
| D Fine | 0 |
| D Freq<Vel | 0 |
| D Quantize | On |
| D Fix On | Off |
| D Fix Freq | 100 Hz |
| D Fix Freq Mul | 1 |
| Osc-D Level | −∞ dB |
| Osc-D Retrig | On |
| Osc-D Phase | 0 % |
| Osc-D Lev < Vel | 50 % |
| Osc-D Lev < Key | 0 % |
| Osc-D Wave | Sine |
| Osc-D Feedb | 0 % |
| Osc-D < Pe | On |
| Osc-D < LFO | On |
| De Attack | 0.00 ms |
| De Init | −∞ dB |
| De Decay | 400 ms |
| De Peak | 0.0 dB |
| De Sustain | -24 dB |
| De Release | 400 ms |
| De Mode | None |
| De Loop | 100 ms |
| De Retrig | 1/16 |
| De R < Vel | 0 % |
| Time | 0 % |
| Time < Key | 0 % |
| Pe On | Off |
| Pe Attack | 0.00 ms |
| Pe Init | +12 st |
| Pe A Slope | 0.0 % |
| Pe Decay | 400 ms |
| Pe Peak | +12 st |
| Pe D Slope | 100 % |
| Pe Sustain | 0 st |
| Pe Release | 50.0 ms |
| Pe End | 0 st |
| Pe R Slope | 100 % |
| Pe Mode | None |
| Pe Loop | 100 ms |
| Pe Retrig | 1/16 |
| Pe R < Vel | 0 % |
| Pe Amount | 100 % |
| Pe Amt A | 100 % |
| Pe Dst B | Off |
| Pe Amt B | 100 % |
| LFO On | Off |
| LFO Type | Sine |
| LFO Range | Low |
| LFO Rate | 100.00 |
| LFO Sync | 1/16 |
| LFO R < K | 0.0 % |
| LFO Retrigger | On |
| LFO Amt | 10 % |
| LFO Amt A | 100 % |
| LFO Dst B | Off |
| LFO Amt B | 100 % |
| LFO < Vel | 0.0 % |
| LFO < Pe | On |
| Le Attack | 0.00 ms |
| Le Init | −∞ dB |
| Le Decay | 600 ms |
| Le Peak | 0.0 dB |
| Le Sustain | 0.0 dB |
| Le Release | 50.0 ms |
| Le End | −∞ dB |
| Le Mode | None |
| Le Loop | 100 ms |
| Le Retrig | 1/16 |
| Le R < Vel | 0 % |
| Filter On | On |
| Filter Type | Lowpass |
| Filter Circuit - LP/HP | PRD |
| Filter Circuit - BP/NO/Morph | Clean |
| Filter Slope | 24 dB |
| Filter Freq | 1.00 kHz |
| Filter Res | 0.0 % |
| Filter Morph | 0 lp/bp |
| Filter Drive | 12.0 dB |
| Filt < Vel | 15 % |
| Filt < Key | 100 % |
| Fe Amount | 24 % |
| Filt < LFO | Off |
| Fe Attack | 2.00 ms |
| Fe Init | 0.0 % |
| Fe A Slope | 0.0 % |
| Fe Decay | 2.20 s |
| Fe Peak | 100 % |
| Fe D Slope | 100 % |
| Fe Sustain | 0.0 % |
| Fe Release | 44.9 ms |
| Fe End | 0.0 % |
| Fe R Slope | 100 % |
| Fe Mode | None |
| Fe Loop | 100 ms |
| Fe Retrig | 1/16 |
| Fe R < Vel | 0 % |
| Shaper Type | Off |
| Shaper Mix | 100 % |
| Shaper Drive | 0.00 dB |
Saturator parameters #
Enable High Quality in Saturator’s device context menu. Color is Off and the separate output clip mode is No Clip.
| Parameter | Displayed value |
|---|---|
| Device On | On |
| Drive | 12 dB |
| Pre Dc Filter | On |
| Type | Analog Clip |
| Color On | Off |
| Color Amt Low | 0.0 % |
| Color Freq | 1.00 kHz |
| Color Width | 30 % |
| Color Amt Hi | 0.0 % |
| Post Clip Mode | No Clip |
| Output | -11 dB |
| Dry/Wet | 100 % |
| Threshold | -50 dB |
| WS Drive | 100 % |
| WS Linearity | 50 % |
| WS Curve | 5.0 % |
| WS Damp | 0.0 % |
| WS Period | 0.0 % |
| WS Depth | 0.0 % |