playgrid.ccRead tutorial

Tutorial 009 / SuperCollider

Build Faded Circuit Keys in SuperCollider

Build Faded Circuit Keys in SuperCollider with drifting digital keys, explicit envelopes and the sound-shaping chain explained in the guide.

4 stepsDrifting Digital KeysSuperCollider

Listen to the finished sound

Download WEBM ↓

Follow the synthesis steps in order. Use the audio examples and device settings alongside the instructions.

Step 01 / 4

Shape the wobbling sustained source

Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing. The triangle source is an explicit odd-harmonic sine sum through partial 31, with components at or above 22 kHz muted.

Set ~soundStage = 1 in the full script. Blend 86% saw with 14% triangle at +3 dB as an interpretation of Shark Tooth Shape 0.14. Add ±5.2 cents at 1.25 Hz and a slower ±2.4-cent drift. The amplitude holds full sustain after a 1 ms attack, with 8.5 s release. A separate filter contour takes 8.5 s to fall to zero and 18 s to release; it moves the fully tracked 800 Hz lowpass by 1.05 octaves.

SuperCollider control Value
Shape 86% saw + 14% triangle, +3 dB
Pitch motion ±5.2 cents at 1.25 Hz; ±2.4 cents at 0.13 Hz
Amplitude 1 ms attack, full sustain, 8.5 s release
Filter contour 1 ms / 8.5 s / zero / 18 s
Filter / instrument 800 Hz base, full tracking, 1.05 octave depth; −12 dB

Sound after step 1 — WebM/Opus

Next: Blend a narrower middle band →

Step 02 / 4

Blend a narrower middle band

Set ~soundStage = 2 in the full script. Pass a branch through two cascaded 650 Hz bandpasses, each with 650/0.6 Hz bandwidth, then mix 30% of that branch with 70% direct signal. The cascade interprets the source 24 dB bandpass and 8% resonance using a different filter network. Its fixed center colors different pitches differently.

SuperCollider control Value
Bandpass Two Butterworth stages, 650 Hz; bandwidth 1083.33 Hz
Wet mix 30%

For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.

Sound after step 2 — WebM/Opus

Next: Add a restrained digital texture →

Step 03 / 4

Add a restrained digital texture

Set ~soundStage = 3 in the full script. Hold incoming samples at 24000 Hz and round their amplitudes to 9 signed bits, then blend 35% of that branch with the direct tone. The held samples add staircase texture and the rounding roughens quieter portions. This simple clocked quantizer interprets Redux without its proprietary jitter or shaping behavior. No pre- or post-filter is added.

SuperCollider control Value
Hold rate 24000 Hz
Signed bits / wet 9 / 35%

Sound after step 3 — WebM/Opus

Next: Surround the tone with a damped room →

Step 04 / 4

Surround the tone with a damped room

Set ~soundStage = 4 and evaluate the full block. Feed the preceding signal into FreeVerb2, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.

The SuperCollider room value is 0.935902 and damping is 0.8125. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.

SuperCollider room control Value
FreeVerb2 internal mix 1, wet output only
Room 0.935902
Damping 0.8125
Predelay 8 ms
External room wet 22%
SuperCollider control Value
Room side multiplier 1
Room input cuts Off

Sound after step 4 — WebM/Opus

Audio & settings ↓

Audio & settings

Audio recordings and settings for this tutorial.

Full SuperCollider script

The complete Faded Circuit Keys instrument uses stock SuperCollider units. Set ~soundStage from 1 to 4 and evaluate the entire block again to select a cumulative stage. Wait for the ready message; ~soundNote.(60, 0.8, 1) plays MIDI 60 at velocity 0.8 with a one-second held duration. Held duration controls when release begins, while each source's decay and modulation continue independently. ~soundStop.() frees the active instrument and its effects. This block replaces the previously installed PlayGrid instrument in the same interpreter.

(
~soundStage = 4;
~soundOutputScale = 1.046207;
~soundRelease = 18;
~soundNames = (motion: \pgFadedCircuitKeysMotion, voice: \pgFadedCircuitKeysVoice, effects: \pgFadedCircuitKeysEffects);
~pgWave = { |freq, amplitude=1, phase=0, partials=#[1]|
    Mix(partials.collect { |weight, i|
        var harmonic = freq * (i + 1);
        SinOsc.ar(harmonic.clip(0.01, 22000), phase * 2pi * (i + 1)) * weight * (harmonic < 22000)
    }) * amplitude;
};
~pgTriangle = { |freq, phase=0|
    var partials = Array.fill(31, { |i|
        var n = i + 1;
        if(n.odd) { ((-1) ** ((n - 1) / 2)) * 8 / (pi.squared * n.squared) } { 0 }
    });
    ~pgWave.(freq, 1, phase, partials);
};
~soundDefs = [
    SynthDef(\pgFadedCircuitKeysMotion, { |out=0| Out.kr(out, DC.kr(0)) }),
    SynthDef(\pgFadedCircuitKeysVoice, { |out=0, midi=60, velocity=0.8, gate=1, startMidi=60|
        var stage = ~soundStage;
    var aL = 0, aR = 0, aSaw = 0, aSource = 0, aTri = 0, iHz = 0, iVelocity = 0, kAmp = 0;
    var kCut = 0, kDrift = 0, kFilter = 0, kHz = 0, kWobble = 0;
    iHz = (midi).midicps;
    iVelocity = (velocity).clip(0, 1);
    kWobble = (SinOsc.kr(1.25, 0 * 2pi) * 5.2);
    kDrift = (SinOsc.kr(0.13, 0.2 * 2pi) * 2.4);
    kHz = (iHz * (2 ** ((kWobble + kDrift) / 1200)));
    aSaw = (Saw.ar(kHz) * (3).dbamp);
    aTri = (~pgTriangle.(kHz, 0) * (3).dbamp);
    aSource = ((aSaw * 0.86) + (aTri * 0.14));
    kFilter = EnvGen.kr(Env([0, 1, 0, 0], [0.001, 8.5, 18], \lin, releaseNode: 2), gate);
    kCut = ((800 * (2 ** ((1.05 * kFilter) + ((midi - 60) / 12))))).clip(30, 18000);
    aSource = MoogFF.ar(aSource, (kCut).clip(20, 18000), (0 * 4).clip(0, 3.95));
    aSource = HPF.ar(aSource, (10).clip(20, 18000));
    kAmp = EnvGen.kr(Env([0, 1, 1, 0], [0.001, 3.85, 8.5], \lin, releaseNode: 2), gate);
    aL = (((aSource * kAmp) * ((0 - 12)).dbamp) * (0.5 + (0.5 * iVelocity)));
    aR = aL;
    Out.ar(out, [aL, aR]);
        EnvGen.kr(Env.asr(0.0001, 1, 18), gate, doneAction: 2);
    }),
    SynthDef(\pgFadedCircuitKeysEffects, { |in=0, out=0|
        var stage = ~soundStage;
        var outputScale = ~soundOutputScale;
        var input = In.ar(in, 2);
    var aBandL = 0, aBandR = 0, aDigitalClock = 0, aHeldL = 0, aHeldR = 0, aL = 0, aQuantL = 0, aQuantR = 0;
    var aR = 0, aRoomInL = 0, aRoomInR = 0, aRoomL = 0, aRoomMid = 0, aRoomPreL = 0, aRoomPreR = 0, aRoomR = 0;
    var aRoomSide = 0, room24 = 0;
    aL = input[0];
    aR = input[1];
    if((stage >= 2)) {
    aBandL = BPF.ar(aL, (650).clip(20, 18000), ((650 / 0.6) / 650).clip(0.001, 4));
    aBandR = BPF.ar(aR, (650).clip(20, 18000), ((650 / 0.6) / 650).clip(0.001, 4));
    aBandL = BPF.ar(aBandL, (650).clip(20, 18000), ((650 / 0.6) / 650).clip(0.001, 4));
    aBandR = BPF.ar(aBandR, (650).clip(20, 18000), ((650 / 0.6) / 650).clip(0.001, 4));
    aL = ((aL * 0.7) + (aBandL * 0.3));
    aR = ((aR * 0.7) + (aBandR * 0.3));
    };
    if((stage >= 3)) {
    aDigitalClock = (Impulse.ar(1 / 4.1666666666666665e-05) * 1);
    aHeldL = Latch.ar(aL, aDigitalClock);
    aQuantL = (((aHeldL * 256)).round / 256);
    aL = ((aL * 0.65) + (aQuantL * 0.35));
    aHeldR = Latch.ar(aR, aDigitalClock);
    aQuantR = (((aHeldR * 256)).round / 256);
    aR = ((aR * 0.65) + (aQuantR * 0.35));
    };
    if((stage >= 4)) {
    aRoomInL = aL;
    aRoomPreL = DelayN.ar(aRoomInL, 0.008, 0.008);
    aRoomInR = aR;
    aRoomPreR = DelayN.ar(aRoomInR, 0.008, 0.008);
    room24 = FreeVerb2.ar(aRoomPreL, aRoomPreR, 1, 0.935902, 0.8125);
    aRoomL = room24[0];
    aRoomR = room24[1];
    aRoomMid = ((aRoomL + aRoomR) * 0.5);
    aRoomSide = (((aRoomL - aRoomR) * 0.5) * 1);
    aL = ((aL * 0.78) + ((aRoomMid + aRoomSide) * 0.22));
    aR = ((aR * 0.78) + ((aRoomMid - aRoomSide) * 0.22));
    };
    Out.ar(out, [((aL * 1) * outputScale), ((aR * 1) * outputScale)]);
    })
];
~soundStop = {
    if(~cirrusGroup.notNil) { ~cirrusGroup.free; ~cirrusGroup = nil };
    if(~cirrusAudio.notNil) { ~cirrusAudio.free; ~cirrusAudio = nil };
    if(~cirrusMotion.notNil) { ~cirrusMotion.free; ~cirrusMotion = nil };
    if(~pgGroup.notNil) { ~pgGroup.free; ~pgGroup = nil };
    if(~pgAudio.notNil) { ~pgAudio.free; ~pgAudio = nil };
    if(~pgMotion.notNil) { ~pgMotion.free; ~pgMotion = nil };
};
~soundInstall = {
    s.waitForBoot {
        ~soundStop.();
        ~soundDefs.do { |definition| definition.add };
        s.sync;
        ~pgAudio = Bus.audio(s, 2);
        ~pgMotion = Bus.control(s, 1);
        ~pgGroup = Group.head(s);
        ~pgLastMidi = 60;
        Synth.head(~pgGroup, ~soundNames.motion, [\out, ~pgMotion]);
        ~pgVoices = Group.tail(~pgGroup);
        Synth.tail(~pgGroup, ~soundNames.effects, [\in, ~pgAudio]);
        "Faded Circuit Keys ready".postln;
    };
};
~soundNote = { |midi=60, velocity=0.8, hold=1|
    var note = Synth.head(~pgVoices, ~soundNames.voice, [
        \out, ~pgAudio, \midi, midi, \velocity, velocity.clip(0, 1),
        \startMidi, ~pgLastMidi
    ]);
    ~pgLastMidi = midi;
    SystemClock.sched(hold, { note.set(\gate, 0); nil });
    note;
};
if(~soundOffline != true) { ~soundInstall.() };
)