Step 01 / 4
Build the two-octave resonant body #
Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.
Set ~soundStage = 1 in the full script. Blend two saws at −6 dB each: one at the note plus two cents, the other an octave down. Add an octave-down sine at −15 dB. A 300 Hz tracked ladder lowpass uses resonance 0.67 and +3 dB smooth drive. The amplitude has 57 ms attack, decay and release with −2.3 dB sustain; instrument gain is −19 dB with 50% touch response.
| SuperCollider control | Value |
|---|---|
| Saw / sub | −6/−6 dB saws; octave-down sine −15 dB |
| Filter | 300 Hz, full tracking, 0.67 resonance, +3 dB drive |
| Amplitude | 57 ms / 57 ms / −2.3 dB / 57 ms |
| Instrument | −19 dB |
For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.
Sound after step 1 — WebM/Opus
Next: Jump between random filter states →Step 02 / 4
Jump between random filter states #
Set ~soundStage = 2 in the full script. A sample-and-hold random value changes at 2.67 Hz. Use it for ±1 octave of cutoff and ±3 dB of input drive. Positive values brighten and push the resonant filter, while negative values darken it. Each note has its own random generator; the exact source noise waveform and modulation scale differ.
| SuperCollider control | Value |
|---|---|
| Random rate | 2.67 Hz |
| Cutoff / drive movement | ±1 octave / ±3 dB |
For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.
Sound after step 2 — WebM/Opus
Next: Add filtered stereo echoes →Step 03 / 4
Add filtered stereo echoes #
Set ~soundStage = 3 in the full script. Use 750 ms left and 775 ms right, 25% feedback and 30% wet. Feed each channel back into itself, keeping the unequal timing paths independent. Filter each echo around 900 Hz, with a 7-octave interval between highpass and lowpass cutoffs. Feedback values are updated once per server processing block, adding that small delay to the recirculating path. Held notes leave older colors behind the current tone.
| SuperCollider control | Value |
|---|---|
| Times | 750 / 775 ms |
| Feedback / wet | 25% / 30% |
| Routing | Independent channels |
| Filter center / width | 900 Hz / 7 octaves |
| Time LFO | 0 Hz, ±0% |
Sound after step 3 — WebM/Opus
Next: Surround the tone with a damped room →Step 04 / 4
Surround the tone with a damped room #
Set ~soundStage = 4 and evaluate the full block. Feed the preceding signal into FreeVerb2, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.
The SuperCollider room value is 0.96 and damping is 0.8875. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.
| SuperCollider room control | Value |
|---|---|
| FreeVerb2 internal mix | 1, wet output only |
| Room | 0.96 |
| Damping | 0.8875 |
| Predelay | 5 ms |
| External room wet | 15% |
| SuperCollider control | Value |
|---|---|
| Room side multiplier | 1 |
| Room input cuts | Off |
Sound after step 4 — WebM/Opus
Audio & settings ↓