Step 01 / 5
Build the first oscillator and touch contour #
Select ~soundStage = 1 and evaluate the full script at the end of this guide. Wait for the instrument-ready message before playing.
Set ~soundStage = 1 in the full script. Use rect at -7 dB with pulse width 25% when applicable. The contour has 0.005 s attack, 2.08 s exponential decay to 0.15 sustain and 0.572 s release. Multiply by velocity^2; this explicit power curve interprets the source velocity response. Keep the signal centered before adding effects.
| SuperCollider control | Value |
|---|---|
| Source | Rect, -7.0 dB; width 25 % |
| Amplitude A/D/S/R | 0.005 / 2.08 / 0.15 / 0.572 |
| Amplifier / instrument | -6.0 dB / -7.0 dB |
| Velocity power | 2.0 |
Sound after step 1 — WebM/Opus
Next: Add the second oscillator and resonant contour →Step 02 / 5
Add the second oscillator and resonant contour #
Set ~soundStage = 2 in the full script. Add sine at -22 dB, tuned by 1 octaves. Use a Low-pass 24dB/oct interpretation with 868 Hz base cutoff, 2.3 octave envelope depth and 0.7 octave-per-octave pitch tracking. The contour opens then settles quickly while the amplitude remains. Smooth input drive interprets Sym1; the ladder or second-order lowpass is a different circuit. The 0 Hz LFO, where enabled, restarts per note rather than running freely.
| SuperCollider control | Value |
|---|---|
| Second source | Sine; -22 dB; width not used |
| Filter base / source resonance | 868 Hz / 0.16 |
| Filter A/D/S/R | 0.005 / 0.32 / 0.08 / 0.25 |
| Envelope / key / LFO depth | 2.3 / 0.7 / 0 octaves |
| LFO rate | 0 Hz |
| Filter input shape | tanh(input × 1.4) / 1.4 |
For MoogFF, multiply the stated source resonance amount by four to obtain its 0–4 gain argument (limited to 3.95). The complete script gives this gain expression beside each cutoff.
Sound after step 2 — WebM/Opus
Next: Add moving stereo chorus →Step 03 / 5
Add moving stereo chorus #
Set ~soundStage = 3 in the full script. Move two delay taps around 12 ms by ±2.4 ms at 0.44 Hz, with opposite phases and 18% wet mix. Highpass only the wet inputs at 180 Hz to leave the direct low body clear. Scale side information by 1; tap feedback is 0. These explicit tap depths interpret the source Amount and ensemble movement rather than copy the internal algorithm. Sustained notes reveal slow pitch interference.
| SuperCollider control | Value |
|---|---|
| Tap center / excursion | 12 / ±2.4 ms |
| Rate / wet | 0.44 Hz / 18% |
| Wet highpass | 180 Hz |
| Width / feedback | 1 / 0 |
| Warmth shaping | 0% smooth-drive interpretation |
Sound after step 3 — WebM/Opus
Next: Surround the tone with a damped room →Step 04 / 5
Surround the tone with a damped room #
Set ~soundStage = 4 and evaluate the full block. Feed the preceding signal into FreeVerb2, using its fully wet output and the dry/wet routing shown in the script. The room continues after individual note envelopes release. Predelay separates the initial articulation from the diffuse tail; the external wet mix controls how far that tail moves forward.
The SuperCollider room value is 0.571148 and damping is 0.71875. These dimensionless settings are choices for this algorithm, rather than equivalent values for Ableton decay or Csound feedback and damping. More damping darkens the circulating highs. Any input filters and mid/side width changes in this stage retain their own explicit settings in the full script.
| SuperCollider room control | Value |
|---|---|
| FreeVerb2 internal mix | 1, wet output only |
| Room | 0.571148 |
| Damping | 0.71875 |
| Predelay | 12 ms |
| External room wet | 17% |
| SuperCollider control | Value |
|---|---|
| Room side multiplier | 1 |
| Room input cuts | Off |
Sound after step 4 — WebM/Opus
Next: Set the final width and gain →Step 05 / 5
Set the final width and gain #
Set ~soundStage = 5 in the full script. Use 2.31 dB gain after the effects. Scale the side signal by 1, preserving the center. Apply LeakDC DC removal with coefficient 0.995. The fixed ~soundOutputScale gain follows the complete effect chain at every stage. The effects Synth reads the stereo bus after the note group, and continues through note releases.
| SuperCollider control | Value |
|---|---|
| Final gain | 2.31 dB |
| Width | 1 × side |
| Bass side cutoff | Off |
| DC removal | LeakDC, coefficient 0.995 |
Sound after step 5 — WebM/Opus
Audio & settings ↓