playgrid.ccRead tutorial

Tutorial 004 / Csound

Build Three Octave Bass in Csound

Build Three Octave Bass in Csound with octave saw bass synthesis, explicit contours and the sound-shaping chain explained in the guide.

3 stepsOctave Saw BassCsound 6

Listen to the finished sound

Download WEBM ↓

Follow the synthesis steps in order. Use the audio examples and device settings alongside the instructions.

Step 01 / 3

Stack the three octave saws

Set giStage init 1 in the full script. Use ratios 0.25, 0.5005 and 1 relative to the played pitch, each at −9.1 dB. These express global transposition −24 st with source ratios 1/2/4. The small middle offset interprets Fine 1. Use a 2 ms attack, full sustain, 44.9 ms release and −15 dB instrument gain.

Csound control Value
Ratios / levels 0.25 / 0.5005 / 1; −9.1 dB each
Amplitude 2 ms attack, full sustain, 44.9 ms release
Instrument −15 dB

Sound after step 1 — WebM/Opus

Next: Drive a tracked closing lowpass →

Step 02 / 3

Drive a tracked closing lowpass

Set giStage init 2 in the full script. Apply +12 dB smooth input drive and a 24 dB ladder lowpass. Its base is 1000 Hz, with full keyboard tracking, 0.3-octave velocity depth and a 1.44-octave envelope. A 2 ms rise and 2.2 s fall bring the initial brightness toward the darker body. The ladder replaces PRD with its own response.

Csound control Value
Cutoff 1000 × 2^(1.44 × envelope + (note−60)/12 + 0.3 × velocity) Hz
Contour 2 ms / 2.2 s / zero / 44.9 ms
Filter drive / resonance +12 dB / zero

Sound after step 2 — WebM/Opus

Next: Round the signal with saturation →

Step 03 / 3

Round the signal with saturation

Set giStage init 3 in the full script. Use +12 dB drive with 100% shaped signal and -11 dB output trim. The smooth curve is tanh(input × 3 × ampdb(drive)) / 3; the other portion stays clean. Louder peaks enter its curved region more strongly, adding harmonics and rounding the envelope. This interprets the source saturation curve rather than implementing its proprietary transfer function.

Csound control Value
Drive / output 12 / -11 dB
Shaped mix 100%
Input DC removal Order 2048

Sound after step 3 — WebM/Opus

Audio & settings ↓

Audio & settings

Audio recordings and settings for this tutorial.

Full Csound script

This document contains the complete Three Octave Bass source, shared effects and example score. giStage selects the cumulative stages from 1 to 3; 3 is the finished sound.

<CsoundSynthesizer>
<CsOptions>
-odac -d
</CsOptions>
<CsInstruments>
sr = 48000
ksmps = 16
nchnls = 2
0dbfs = 1

giStage init 3
giOutputScale init 1.74642
giSine ftgen 0, 0, 16384, 10, 1
gaLeft init 0
gaRight init 0

instr 1
  iHz = cpsmidinn(p4)
  iVelocity = limit(p5, 0, 1)
  aA vco2 ampdb(-9.1),iHz*0.25,0
  aB vco2 ampdb(-9.1),iHz*0.5005,0
  aC vco2 ampdb(-9.1),iHz,0
  aSource = aA+aB+aC
  if giStage >= 2 then
  kFilter linsegr 0, 0.002, 1, 2.2, 0, 0.0449, 0
    kCut = limit(1000*pow(2,1.44*kFilter+(p4-60)/12+0.3*iVelocity),30,18000)
    aDrive = tanh(aSource*ampdb(12))
    aSource moogladder aDrive,kCut,0
  endif
  kAmp linsegr 0, 0.002, 1, 0.5, 1, 0.0449, 0
  aL = aSource*kAmp*ampdb(-15)
  aR = aL
  gaLeft = gaLeft+aL
  gaRight = gaRight+aR
endin
instr 90
  aL = gaLeft
  aR = gaRight
  if giStage >= 3 then
    aCleanL dcblock2 aL, 2048
    aShapeL = tanh(aCleanL*3*ampdb(12))/3
    aL = (aCleanL*0+aShapeL*1)*ampdb(-11)
    aCleanR dcblock2 aR, 2048
    aShapeR = tanh(aCleanR*3*ampdb(12))/3
    aR = (aCleanR*0+aShapeR*1)*ampdb(-11)
  endif
  outs aL*giOutputScale, aR*giOutputScale
  clear gaLeft, gaRight
endin
</CsInstruments>
<CsScore>
; p3 held seconds, p4 MIDI pitch, p5 velocity
i 1 0 0.8 48 0.8
i 1 1.5 0.8 60 0.9
i 1 3 0.8 55 0.65
i 90 0 6.845
e
</CsScore>
</CsoundSynthesizer>